This work presents a multipurpose and multilayered stainless steel microneedle sensor for the in situ redox potential monitoring in food and drink samples, termed MN redox sensor. The MN redox sensor was fabricated by layer-by-layer (LbL) approach. The in-tube multilayer coating comprised carbon nanotubes (CNTs)/cellulose nanocrystals (CNCs) as the first layer, polyaniline (PANI) as the second layer, and the ferrocyanide redox couple as the third layer. Using cyclic voltammetry (CV) as a transduction method, the MN redox sensor showed facile electron transfer for probing both electrical capacitance and redox potential, useful for both analyte specific and bulk quantification of redox species in various food and drink samples. The bulk redox species were quantified based on the anodic/cathodic redox peak shifts (Ea/Ec) on the voltammograms resulting from the presence of redox-active species. The MN redox sensor was applied to detect selected redox species including ascorbic acid, H2O2, and putrescine, with capacitive limits of detection (LOD) of 49.9, 17.8, and 263 ng/mL for each species, respectively. For the bulk determination of redox species, the MN redox sensor displayed LOD of 5.27 × 103, 55.4, and 25.8 ng/mL in ascorbic acid, H2O2, and putrescine equivalents, respectively. The sensor exhibited reproducibility of ~1.8% relative standard deviation (%RSD). The MN redox sensor was successfully employed for the detection of fish spoilage and antioxidant quantification in king mushroom and brewed coffee samples, thereby justifying its potential for food quality and food safety applications. Lastly, the portability, reusability, rapid sampling time, and capability of in situ analysis of food and drink samples makes it amenable for real-time sensing applications.
The present paper reports synthesis and development of nitrogen doped porous carbon nanoframeworks (N-CNFs) based electrochemical sensor for sensitive detection of tannic acid (TA) which is one of the potentially harmful organic pollutants. N-CNFs were prepared using zeolitic imidazolate frameworks (ZIF-8) as precursor and silica protected calcination strategy. The as prepared N-CNFs were characterized by different microscopic (scanning electron microscopy; SEM, transmission electron microscopy; TEM), spectroscopic (raman, X-ray diffraction; XRD, X-ray photoelectron spectroscopy; XPS, fourier transform infrared; FTIR), adsorption (Brunauer–Emmett–Teller; BET) and electrochemical impedance spectroscopic (EIS) methods. N-CNFs showed large surface area, nitrogen rich content, high conductivity and interconnecting porous channels which helped in achieving high electrochemical performances toward sensing applications. The present work discusses a simple methodology for detection of TA at N-CNFs modified glassy carbon electrode (GCE) using voltammetric techniques. The fabricated N-CNFs electrode showed high sensitivity, selectivity and reproducibility for TA detection with detection limit (LOD) and quantification limit as low as 0.86 μg mL−1 and 2.85 μg mL−1 respectively. The electrode exhibited a satisfied recovery between 90.31%–106.2% for detection of TA in polluted water.