A good-performance and low-cost electrocatalyst Ni–rGO/CeO 2 has been achieved due to the increased oxygen vacancies and active sites brought about by the synergistic effect of rGO decoration and Ni doping.
With the rapid development of big data and the internet of things, the current computing paradigms based on traditional Von Neumann architecture have suffered from limited throughput and energy inefficiency. The memristor-based artificial neural network computing system could be regarded as a promising candidate to overcome this bottleneck. In this study, silicon carbide (SiC) nanowire (NW)-based optoelectronic memristors are successfully developed, which can realize complex brain-like features such as dendritic neuron and Pavlov’s learning. On the basis of the visual function, perception, storage, and in situ computing functions integrated within optoelectronic memristors have been achieved. More importantly, benefiting from the excellent computing power of the SiC NW visual synapses, the constructed spike neural network is capable of implementing the identification of early lung cancer lesions. The accuracy rate of detection exceeds 90% with only a few iterations, indicating promising applications in the medical field with high efficiency and accuracy. The present study provides a promising path for developing and promoting SiC-based integrating perception-storage-computation artificial intelligence devices for neuromorphic computing technology.
Optimizing the NH 4 F content in NiFe-layered double hydroxides (LDHs) significantly enhances their OER performance by tuning the microstructure and electronic properties, with a higher proportion of high-valent cations improving catalytic efficiency.
An element-assisted chemical vapor transport reaction was used not only to synthesize single-phase crystal red phosphorus [P12(4)]P2[micron belts, but also single-phase crystal Hittorf's phosphorus micron rods extending along the [001] direction.
We report on the development of a 940-nm diode laser bar based on epitaxially stacked active regions by employing a tunnel junction structure. The tunnel junction and the device parameters were systematically optimized to achieve high output and power conversion efficiency. A record quasi-continuous wave (QCW) peak power of 1.91 kW at 25 °C was demonstrated from a 1-cm wide bar with a 2-mm cavity length at 1 kA drive current (200 μs pulse width and 10 Hz repetition rate). Below the onset of the thermal rollover, the slope efficiency was as high as 2.23 W/A. The maximum power conversion efficiency of 61.1% at 25 °C was measured at 300 A. Reducing the heatsink temperature to 15 °C led to a marginal increase in the peak power to 1.95 kW.