The relationship between the conditions of the use of filter bags made of non-woven fabric and the separation efficiency of wood dust generated in a furniture factory was experimentally determined in the conditions of pulse-jet filtration using a pilot-scale baghouse as waste during the processing of wood composites. The experiments were carried out, and we describe the results of the experiment as consisting in assembling one type of filter bag in two dust extraction installations operating under different operating conditions in the same furniture factory. The filter bags working in the assumed time intervals were then tested for their separation efficiency using a stand for testing filtration processes on a pilot scale. The test results are presented in the form of graphs and tables describing both the characteristics of the dust extraction installations and the filter fabric used, as well as the separation efficiency of bags used at different times in different industrial operating conditions for each of them. The conducted research allowed us to recognize the phenomenon of filtration in relation to a very important value, which is the separating efficiency of dust extraction in various operating conditions of dust extraction installations in a furniture factory during the long-term use of filter fabrics. The obtained results allowed us to determine the separation efficiency for the tested bags at a level of over 99.99% and to state that this separation efficiency increased with the working time of the bag. The structure of the outlet dust from filters in the wood composites processing factory constitutes an element of the working environment if the purified air is returned in a recirculation circuit to the interior of the working area. Thanks to this, it is possible to predict the separation efficiency in the long-term use of filter dust collectors for wood dust in furniture factories.

The study specifies the value of the dust resistance coefficient in the process of wood dust filtration in a pilot-scale test stand. The experiments were carried out for one type of filter material—polyester with a PP film previously used in different production lines. Filter bags from the filtering installation of the processing line for narrow surfaces of furniture panels of the honeycomb structure with a chipboard frame, HDF, natural veneer cladding, and a line of CNC drilling machines, were taken into account. Before the pilot-scale tests, the bags had been in use in industrial installations from zero to nine months. All tests were performed under identical filtration conditions. The values of the dust resistance coefficient depend on the operating time and the conditions in which filtration is carried out in an industrial plant, and increased from 6507 s⁻¹ to 10,208 s⁻¹ for the bags from the filter of the narrow surfaces processing line and to 29,729 s⁻¹ for the bags from the filter of the drilling line. The most important factor influencing the properties of the filter bag in the process of wood dust filtration in an industrial filter is the cleaning pulses frequency.

The article describes the process of forming the wood dust filtration resistance generated during furniture production using the honeycomb board technology in a filtering installation operating in industrial conditions. The influence of the service life of the filter fabric on the filtration resistance values in industrial conditions for one installation and one type of filter fabric was analyzed. For this purpose, filter bags made of one type of filter material were used in an industrial filtering installation at four different times. The results were compared to those previously obtained at the same factory but with a different filter bag type. The analysis was based on the changes in the flow resistance of clean and dust-laden air through the filter fabric used at various times in the filtering installation of the narrow-surface treatment line in a furniture factory. This allowed for the determination of the dynamics and nature of changes in filtration resistance in industrial conditions for wood dust. The values of the dust resistance coefficient depend on the operating time and increased to the level of 20594 [s⁻¹] for material A and from 6412.031 [s⁻¹] to 10128.94 [s⁻¹] for material B. The dimensional characteristics of the filtered dust and the technological conditions under which it was generated were also described.