A notch-induced high-speed splitting method was developed for high-quality cropping of metal bars using a new type of electric-pneumatic counter hammer. Theoretical equations and FE models were established to reveal the crack initiation and fracture mode. Comparative tests were conducted for notched and unnotched bars of four types of steels, i.e., AISI 1020, 1045, 52100, and 304, and the section quality and microfracture mechanism were further investigated. The results show that damage initiates at the bilateral notch tips with peak equivalent plastic strain, and propagates through the plane induced by the notch tip; the stress triaxiality varies as a quasi-sine curve, revealing that the material is subjected to pure shearing at the notch tip, and under compression at the adjacent region. High precision chamfered billets were obtained with roundness errors of 1.1–2.8%, bending deflections of 0.5–1.5mm, and angles of inclination of 0.7°–3.4°. Additionally, the notch effectively reduced the maximum impact force by 21.6–23.9%, splitting displacement by 7.6–18.6%, and impact energy by 27.8–39.1%. The crack initiation zone displayed quasi-parabolic shallow dimples due to shear stress, and the pinning effect was larger in AISI 52100 and 1045 steel; the final rupture zone was characterized by less elongated and quasi-equiaxial deeper dimples due to the combination of shear and normal stress.

The 7075 aluminum alloy semi-solid billet is prepared using the extrusion alloy semi-solid isothermal treatment (EASSIT) process. These findings indicate that as the isothermal time increases, there is a noticeable increase in both the average grain size (AGS) and shape factor (SF). The relationship between the AGS, SF, and isothermal temperature is complex due to the influence of grain refinement mechanisms. The HV0.2 of isothermal samples decreased with the increase in isothermal temperature, which may be related to the increase in liquid-phase composition and AGS; Cu and Si show obvious segregation at grain boundaries and within intracrystalline droplets. The segregation of Cu and Si in the initially melted solid grains leads to the creation of intracrystalline droplets. The diffraction peaks of Al₇Cu₂Fe, Al₆(Cu, Fe), Al₂CuMg, and MgZn₂ gradually decrease as the isothermal temperature increases. Due to the influence of the grain refinement mechanism and melting mechanism, the coarsening behavior of grains at high isothermal temperatures is more complicated, and the coarsening rate constant shows an increment followed by a subsequent decrease as the isothermal temperature rises. The coarsening kinetics of 7075 aluminum alloy in a semi-solid state can be described using the LSW equation of n = 3.

Aiming at the challenging issue of nonlinear coupling control between cooling intensity and solidification rate in the secondary cooling zone of round billet continuous casting, this study proposes an efficient 3D temperature field modeling method that integrates hybrid coordinate systems with equal-area meshing. The model is applicable to the temperature range of 800–1520 °C during the continuous casting process. With the modeling strategies of constructing an r-θ-z hybrid coordinate system and designing a dynamic equal-area meshing method, and combined with a topological structure optimization algorithm, the geometric adaptability and numerical stability of the model are significantly improved. Based on this, an explicit-semi-implicit dual-mode finite difference solution model is developed, where the explicit scheme meets real-time online calculation requirements, and the semi-implicit scheme combined with preconditioned Gauss–Seidel iteration enables high-precision offline simulation. Furthermore, a boundary condition model incorporating adaptive mold heat flux correction and multi-mechanism heat transfer in the secondary cooling zone is established. Based on Microsoft Visual Studio 2019 (Version 16.11) C++ development, SIMD vectorization and temperature gradient threshold optimization technologies are employed, resulting in a 35% improvement in computational efficiency. Industrial validation results show that, taking 42CrMo steel with a casting speed of 0.24 m/min and a cross-section of φ600 mm as an example, the deviation between the calculated surface temperature (887 °C) and the measured value (876 °C) of the round billet in the straightening zone is only 11 °C, and the calculation error of the cold billet diameter is only 0.325% (with a calculated value of 597.548 mm and a measured average value of 599.5 mm), both meeting the accuracy requirements for engineering applications. The model breaks through the limitations of traditional empirical formulas and provides theoretical support for digital control of continuous casting processes and quality optimization of high-alloy steels.