The use of multiphase flows in microfluidics to carry dispersed phase material (droplets, particles, bubbles, or fibers) has many applications. In this review paper, we focus on such flows on centrifugal microfluidic platforms and present different methods of dispersed phase material generation. These methods are classified into three specific categories, i.e., step emulsification, crossflow, and dispenser nozzle. Previous works on these topics are discussed and related parameters and specifications, including the size, material, production rate, and rotational speed are explicitly mentioned. In addition, the associated theories and important dimensionless numbers are presented. Finally, we discuss the commercialization of these devices and show a comparison to unveil the pros and cons of the different methods so that researchers can select the centrifugal droplet/particle generation method which better suits their needs.
13 December 2023 in Biomechanics and Modeling in Mechanobiology
The fluidic barrier in centrifugal microfluidic platforms is a newly introduced concept for making multiple emulsions and microparticles. In this study, we focused on particle generation application to better characterize this method. Because the phenomenon is too fast to be captured experimentally, we employ theoretical models to show how liquid polymeric droplets pass a fluidic barrier before crosslinking. We explain how secondary flows evolve and mix the fluids within the droplets. From an experimental point of view, the effect of different parameters, such as the barrier length, source channel width, and rotational speed, on the particles’ size and aspect ratio are investigated. It is demonstrated that the barrier length does not affect the particle’s ultimate velocity. Unlike conventional air gaps, the barrier length does not significantly affect the aspect ratio of the produced microparticles. Eventually, we broaden this concept to two source fluids and study the importance of source channel geometry, barrier length, and rotational speed in generating two-fluid droplets.
9 October 2019 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
This paper presents a particular type of fluid flow called MHD (magnetohydrodynamic) in micropumps. The micropump consists of a micro scaled rectangular channel with side walled electrodes for applying electric current and transverse magnetic field perpendicular to the electric field. This continuous flow is the result of Lorentz force, perpendicular to both magnetic and electric fields, which propels the electrically conductive liquid through the channel. The effects of varying width and depth of the channel on flow rate, maximum pressure generation, and energy consumption rate at a constant electric current are studied. Having assumed that the flow is laminar, incompressible, and three-dimensional, finite volume method (FVM) is used to solve the 3D governing equations. It is found that changing width and depth, respectively, show linear and nonlinear behavior with respect to the studied parameters. For validation of the obtained code, a comparison between our calculations and experimental and numerical calculations of previous researchers is done and showed a good quantitative agreement.