Polarization sensitive optical coherence tomography (PS-OCT) is a functional extension of OCT. In addition to imaging based on tissue reflectivity, PS-OCT also enables depth-resolved mapping of sample polarization properties such as phase-retardation, birefringent axis orientation, Stokes vectors, and degree of polarization uniformity (DOPU). In this study, PS-OCT was used to investigate the polarization properties of melanin. In-vitro measurements in samples with varying melanin concentrations revealed polarization scrambling, i.e. depolarization of backscattered light. Polarization scrambling in the PS-OCT images was more pronounced for higher melanin concentrations and correlated with the concentration of the melanin granules in the phantoms. Moreover, in-vivo PS-OCT was performed in the retinas of normal subjects and individuals with albinism. Unlike in the normal eye, polarization scrambling in the retinal pigment epithelium (RPE) was less pronounced or even not observable in PS-OCT images of albinos. These results indicate that the depolarizing appearance of pigmented structures like, for instance, the RPE is likely to be caused by the melanin granules contained in these cells.

Polycrystalline CoFe₂O₄ was produced by a ceramic method. The heat-treated powder was pressed, varying the hydrostatic pressure between 87 and 278 MPa, and was heat-treated again at 1350 °C for 24 h. All magnetic parameters showed a clear dependence on this hydrostatic pressure. The saturation magnetization showed a minimum, and the coercivity, the anisotropy, and the magnetostriction showed a maximum at compaction pressures around 150 MPa. This pressure dependence of the magnetic parameters can be explained by a cation redistribution due to the hydrostatic pressure and heat treatment. Additionally, all samples were field-annealed in an external field of 10 T (at 300 °C for 3 h). The field-annealing process causes an induced uniaxial anisotropy, which results in a reduction of the coercivity (in the easy axis) as well as a dramatic increase in the magnitude of the magnetostriction along the hard axis. Maximum magnetostriction value of $-400\times {10}^{-6}$ was obtained. Additionally, dλ/dH is increased within a factor of three with magnetic heat treatment.

Due to the high level of light absorption and light scattering of dark colored powders connected with the high refractive indices of ceramic particles, the majority of ceramics studied via stereolithography (SLA) have been light in color, including ceramics such as alumina, zirconia and tricalcium phosphate. This article focuses on a lithography-based ceramic manufacturing (LCM) method for β-SiAlON ceramics that are derived from silicon nitride and have excellent material properties for high temperature applications. This study demonstrates the general feasibility of manufacturing of silicon nitride-based ceramic parts by LCM for the first time and combines the advantages of SLA, such as the achievable complexity and low surface roughness (R_a = 0.50 µm), with the typical properties of conventionally manufactured silicon nitride-based ceramics, such as high relative density (99.8%), biaxial strength (σf = 764 MPa), and hardness (HV₁₀ = 1500).

Porous, silicon carbonitride‐based ceramic support structures for potential membrane and catalysis applications were generated from a preceramic polysilazane precursor in combination with spherical, ultrahigh‐molecular weight polyethylene microparticles through a sacrificial filler approach. A screening evaluation was used for the determination of the impact of both porogen content and porogen size on pore structure, strength, and permeability characteristics of planar specimens. By optimizing both the composition as well as cross‐linking parameters, maximum characteristic biaxial flexural strengths of 65 MPa and porosities of 42% were achieved. The evolution of an interconnected, open‐pore network during thermal porogen removal and conversion of the preceramic polymer led to air permeabilities in the order of 10⁻¹⁴ m². The materials were further exposed to long‐term heat treatments to demonstrate the stability of properties after 100 h at 800°C in oxidizing, inert, and reducing environments. The determined performance, in combination with the versatile preparation method, illustrates the feasibility of this processing approach for the generation of porous ceramic support structures for applications at elevated temperatures in a variety of fields, including membrane and catalysis science.

In this contribution, a low-pressure/low-temperature casting technique for the preparation of novel free-standing macrocellular polymer-derived ceramic support structures is presented. Preceramic polymers (polycarbosilane and poly(vinyl)silazane) are combined with sacrificial porogens (ultra-high molecular weight polyethylene microbeads) to yield porous ceramic materials in the Si—C or Si—C—N systems, exhibiting well-defined pore structures after thermal conversion.