This paper deals with the machinability of nickel-based superalloys using abrasive water jet machining process. The machining studies were carried out with three different parameters such as water jet pressure, traverse speed of jet nozzle, and standoff distance at three different levels. The performances of the process parameters are evaluated by measuring difference in kerf width, kerf wall inclination, and material removal rate (MRR). Further, the surface morphology and material removal mechanisms are analyzed through scanning electron microscope (SEM) images. It is found that water jet pressure is the most influencing factor related to surface morphology and surface quality.

Metal matrix composites are found to have many applications in the materials and structural engineering field. In this work, an investigation is carried out to find the influence of process parameters such as pulse current (I), pulse on time (T _on), pulse duty factor (τ), and voltage (V) on the machining of Al(6351)—5 wt% silicon carbide (SiC)—5 wt% boron carbide (B₄C) hybrid composite through electrical discharge machining. The individual parameters were analyzed with an objective to minimize electrode wear ratio (EWR), surface roughness (SR), and power consumption (PC). The experimental result shows that the output responses were greatly influenced by pulse current, with a contribution of 33.08% to EWR, 76.65% to SR, and 48.08% to PC. The surface characteristics were also examined through scanning electron microscope and the presence of craters and recast layers was observed.