Ning Ma

Dr. Ning Ma

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 February 2020 in Materials
Verified
Journal Article
Open access
PDF file
DZDi Zhao
Di Zhao
KZKeke Zhang
Keke Zhang
NMNing Ma
Ning Ma
SLShijie Li
Shijie Li
CYChenxiang Yin
Chenxiang Yin
FHFupeng Huo
Fupeng Huo
Dynamic observation of the microstructure evolution of Sn2.5Ag0.7Cu0.1RE/Cu solder joints and the relationship between the interfacial intermetallic compound (IMC) and the mechanical properties of the solder joints were investigated during isothermal aging. The results showed that the original single scallop-type Cu6Sn5 IMC gradually evolved into a planar double-layer IMC consisting of Cu6Sn5 and Cu3Sn IMCs with isothermal aging. In particular, the Cu3Sn IMC grew towards the Cu substrate and the solder seam sides; growth toward the Cu substrate side was dominant during the isothermal aging process. The growth of Cu3Sn IMC depended on the accumulated time at a certain temperature, where the growth rate of Cu3Sn was higher than that of Cu6Sn5. Additionally, the growth of the interfacial IMC was mainly controlled by bulk diffusion mechanism, where the activation energies of Cu6Sn5 and Cu3Sn were 74.7 and 86.6 kJ/mol, respectively. The growth rate of Cu3Sn was slightly faster than that of Cu6Sn5 during isothermal aging. With increasing isothermal aging time, the shear strength of the solder joints decreased and showed a linear relationship with the thickness of Cu3Sn. The fracture mechanism of the solder joints changed from ductile fracture to brittle fracture, and the fracture pathway transferred from the solder seam to the interfacial IMC layer.

11 July 2023 in Materials
Verified
Journal Article
Open access
PDF file
NMNing Ma
Ning Ma
XXXiao Xiao
Xiao Xiao
DZDi Zhao
Di Zhao
DYDanqing Yin
Danqing Yin
KZKeke Zhang
Keke Zhang
This study focuses on the synthesis of TiC-TiB2/Fe coatings with varying amounts of aluminum (Al) using tungsten inert gas (TIG) cladding and investigates the impact of Al addition on microstructure refinement and performance enhancement of the coatings. The coatings were prepared on a mild steel substrate using TIG cladding. X-ray diffraction (XRD) analysis revealed the presence of TiC, TiB2, AlxTi, and AlxFe phases in the coatings. Scanning electron microscopy (SEM) images showed that the addition of Al improved the microstructure, reducing defects and enhancing the distribution of reinforcing phases within the coatings. The particle size of the reinforcing phases was significantly refined by the addition of Al. The micro-hardness of the coatings was significantly higher than that of the substrate, with the maximum micro-hardness of the coating reaching 955.5 ± 50.7 HV0.1, approximately six times that of the substrates. However, excessive Al addition led to a reduction in hardness due to a decrease in the quantity of hard phases. The wear tests showed that all the coatings had lower wear loss compared to the substrate material, with the wear loss initially decreasing and then increasing with the increasing Al content. Samples with a 28.57 wt.% Al addition exhibited the best wear resistance, with approximately 16.8% of the wear volume loss compared to mild steel under the same testing conditions, attributed to the optimal combination of reinforcement phase quantity and matrix properties.

25 September 2024 in Coatings
Verified
Journal Article
Open access
PDF file
DYDanqing Yin
Danqing Yin
JCJunming Chang
Junming Chang
YWYonglei Wang
Yonglei Wang
NMNing Ma
Ning Ma
JZJunnan Zhao
Junnan Zhao
MWMeng Wang
Meng Wang
CoCrFeMnNi-XZrO2 (X is a mass percentage, X = 1, 3, 5, and 10) high-entropy alloy composite coatings were successfully prepared on 0Cr13Ni5Mo martensitic stainless steel substrates using laser cladding technology. The phase composition, microstructure, mechanical properties, and cavitation erosion behavior of the composite coatings under different contents of ZrO2 were studied. The mechanism of ZrO2 particle-reinforced cavitation corrosion resistance was studied using ABAQUS2023 finite element software. The results show that the phase structure of the composite coating organization is composed of FCC phase reinforced by ZrO2 phase. The addition of ZrO2 causes lattice distortion. The coatings have typical branch crystals and an equiaxed crystal microstructure. With the increase in ZrO2 content, the microhardness of the composite coatings gradually increases. When X = 10%, the coating’s microhardness reached 348 HV, which was 95.53% higher than the high-entropy alloys without ZrO2 added. Adding ZrO2 can prolong the incubation period of high-entropy alloys; the high-entropy alloy composite coating with 5 wt.% ZrO2 exhibited the best cavitation resistance, with a cumulative volume loss rate of only 15.74% of the substrate after 10 h of ultrasonic cavitation erosion. The simulation results indicate that ZrO2 can withstand higher stress and deformation in cavitation erosion, reduce the degree of substrate damage, and generate higher compressive stress on the coating surface to cope with cavitation erosion.

3 March 2023 in Metals
Verified
Journal Article
Open access
PDF file
KZKaige Zhang
Kaige Zhang
DYDanqing Yin
Danqing Yin
BWBin Wang
Bin Wang
MLMaochang Li
Maochang Li
XXXiao Xiao
Xiao Xiao
KZKeke Zhang
Keke Zhang
CoCrxFeMnNi (x represents the atomic percentage of Cr element, x = 20, 25, 30, and 35, denoted as Cr20, Cr25, Cr30, and Cr35 alloys) high-entropy alloy (HEA) coatings were cladded by plasma arc on the surface of 0Cr13Ni5Mo steel. The effects of Cr elements on the cavitation erosion mechanisms were studied by comparing the differences of microstructure, microhardness, cavitation erosion volume loss (CVL), cavitation erosion volume loss rate (CER), and eroded surface morphologies between the coatings. As the Cr content increased, the microhardness of the coatings increased continuously, and the microstructure transformed into fine dendrites. The microhardnesses of Cr20, Cr25, Cr30, and Cr35 were 223.9 HV, 250.5 HV, 265.2 HV, and 333.7 HV, respectively. With structural change, the slip pattern shifted from uniform distribution to distribution along the grain boundary, increasing slip resistance. Additionally, strain hardening capacity increased with reduced stacking fault energy (SFE). The resistance to cavitation erosion (CR) of the HEA increased with the increase in Cr content. The CVL of 20 h cavitation erosion of Cr35 coating was only 26.84% of that of 0Cr13Ni5Mo steel, and the peak CER was only 28.75% of that of 0Cr13Ni5Mo steel. The fracture damage mechanisms of the four HEA coatings were an obvious lamellar structure and fibrous fracture.

13 September 2024 in Materials
Verified
Journal Article
Open access
PDF file
DYDanqing Yin
Danqing Yin
HZHaoqi Zhao
Haoqi Zhao
YWYonglei Wang
Yonglei Wang
NMNing Ma
Ning Ma
JCJunming Chang
Junming Chang
JDJinglong Dong
Jinglong Dong
The restoration of large support rollers poses an industrial challenge due to the high energy consumption of traditional repair methods. Consequently, a novel approach for repairing support rollers has been introduced and tested on thick-walled components. Finite element simulations aided the study of welding repairs for large thick-walled components, examining element distribution, microstructure, mechanical properties, and residual stress distribution across various processes. The results indicate that employing ABAQUS2023 finite element software to analyze stress variations under different working conditions, the Dynamically Controlled Low-Stress No-Distortion method effectively mitigates residual stresses both during and post welding, reducing average transverse residual stresses by 14.5% and average longitudinal residual stresses in the weld zone by 29.1%. The Dynamically Controlled Low-Stress No-Distortion method narrows the high-temperature range of the heat source, consequently decreasing the size of the heat-affected zone by 33.3% compared to conventional welding. The microstructure featured dendrites and equiaxed columnar crystals, with the Dynamically Controlled Low-Stress No-Distortion method capable of grain refinement, transforming some equiaxed columnar crystals into cellular structures. As grains were refined, microhardness improved, with the covering layer’s microhardness rising by 14.68%. A comparison between simulated and measured values of lateral and longitudinal residual stresses at corresponding points revealed discrepancies of 14.6% and 20.5% in accuracy, respectively.

1 January 2016 in Journal of Nanomaterials
Verified
Journal Article
Open access
PDF file
NMNing Ma
Ning Ma
KZKeke Zhang
Keke Zhang
DYDanqing Yin
Danqing Yin
DZDi Zhao
Di Zhao
ZZZhiwei Zhu
Zhiwei Zhu
FYFuxing Ye
Fuxing Ye
Nanostructured WC-Co/Al powder was synthesized from WC-12Co powder and pure Al powder by mechanical alloying (MA). The morphology and microstructural evolution of WC-Co/Al powder were investigated by a series of characterization methods. The results showed that theβ-Co phase in the initial WC-12Co powder was replaced by the AlxCo phases (such as Al9Co2and Al13Co4). As the ball milling time increased, the average grain size of WC in the WC-Co/Al powder decreased firstly and then remained at a constant value of around 40 nm. The deposition behavior of powders sprayed by high velocity oxygen fuel (HVOF) spraying was investigated. During spraying, the WC-Co/Al powder had a better flattening than the WC-12Co powder without ball milling, which is beneficial to fabricate compact coatings with lower porosity.