Fresh black soldier fly larvae (BSFL) have a high moisture content that complicates storage and requires energy-intensive postharvest drying. This study evaluated the effects of drying-air temperature and tray rotation speed on BSFL drying kinetics, energy performance, and moisture transport in a rotating-tray hot-air dryer. A 3 × 3 factorial experiment was conducted at 50, 60, and 70 °C and tray rotation speeds of 0, 5, and 10 rpm, with three independent replicates, while drying-air velocity was maintained at 3.0 m s−1. Drying time decreased from 31.0 h at 50 °C and 0 rpm to 6.5 h at 70 °C and 10 rpm. The latter condition achieved the highest drying efficiency (49.11%) and lowest specific energy consumption (4.60 MJ kg−1 water removed). Comparable values were obtained at 60 °C and 10 rpm (49.07% and 4.61 MJ kg−1 water removed, respectively). Among nine thin-layer models evaluated for the six rotating-tray treatments at 5 and 10 rpm, the Midilli model provided the best fit. Apparent effective moisture diffusivity ( increased from 0.2457 × 10−9 to 1.2946 × 10−9 m2 s−1, while apparent activation energy ranged from 67.39 to 68.46 kJ mol−1. Rotating-tray drying accelerated BSFL dehydration and improved engineering performance; however, microbial safety and product quality require separate evaluation before food or feed recommendations can be made.
Opposed parabolic V–winglets (PVWs) are evaluated as passive longitudinal-vortex generators for enhancing convection in circular tubes. Three–dimensional steady Reynolds averaged simulations were performed for turbulent air flow through a uniformly heated tube containing opposed PVWs on a central tape. Pitch ratio (PR) = 0.5–2.0, blockage ratio (BR)= 0.1– 0.5, attack angle (α) = 30°–60°, and Reynolds number (Re) = 3000–24,000 were varied under a uniform wall heat flux of 600 W m⁻². The realizable k-ε model was used to resolve turbulent kinetic energy, wall-temperature fields, local heat transfer, and global thermohydraulic performance. The inserts generated counter-rotating streamwise vortices, walldirected jets, separation and reattachment, and repeated thermal-boundary-layer renewal. The Nusselt-number ratio (Nu/Nu0) and Darcy friction factor ratio (f/f0) were 1.396–7.901 and 2.590–140.673, respectively. Although heat transfer increased with BR and decreasing PR, the pressure-loss penalty rose nonlinearly. The thermal enhancement factor (TEF) ranged from 0.531 to 2.327 and generally decreased with Re. The maximum TEF of 2.327 occurred at BR = 0.2, PR = 0.5, α = 30°, and Re = 3000, whereas the maximum Nu/Nu0 occurred at BR = 0.5 and α = 45°. Thus, moderate blockage and close spacing provide a better equal pumping power compromise than the most obstructive geometry.