Cyber-physical systems (CPS) offer great potential for the digital transformation of industrial value creation in the context of Industry 4.0. They unify and integrate several technological approaches, including big data analysis and artificial intelligence, enhancing real-time monitoring and control of manufacturing processes. An extensive knowledge base formed by various disciplines, including information systems, engineering, and computer science, already exists for CPS. However, this knowledge has not been holistically captured and structured to date. To address this research gap, this study conducts a large-scale literature review of 2365 papers representing the current state of the research and then develops a novel categorization on industrial CPS with 10 sections, 32 areas, and 246 fields. The categorization is presented in hierarchical graphical form and can also be utilized as a web tool. To conclude, a perspective on future research needs and potentials to enhance Industry 4.0 in both research and practice are offered.
2 April 2008 in International Journal of Material Forming
The ISO standard 12004-2:2008E for the determination of forming limit curves based on the section method was approved in 2008. About 4 years of measuring experience in different laboratories has shown advantages and weaknesses of the standard and is leading to some minor changes in the specification. In the years from the development of this standard until today a further technical development of the optical measuring devices occurred, so that it is now possible to determine forming limit curves using the time history of the test. This procedure of determination is referred to a time dependent technique and could be the basis of the ISO 12004 part 2 proposal worked out by the work group Erweiterung FLC ISO 12004 of the German group of the IDDRG. This publication recapitulates existing work which was carried out from the IDDRG work group regarding the determination of forming limit curves for sheet metal materials. On one hand known issues with the current section based approach are discussed and on the other hand it deals with a comparison of different algorithms to determine the FLC from the time history of the Nakajima test using strategies to identify the instant of onset of instable necking. The different time dependent algorithms [ utilised are automatically selecting the area where necking is leading to fracture and then analyze the time history of such points using the first or the second time derivative of the true major strain, or of the true thinning strain using methods like: correlation coefficient (modified method based on [2]), gliding correlation coefficient, linear best fit (modified method based on [3]) and gliding difference of mean to median. The resulting experimental FLC points are compared with the results from the section technique described in ISO 12004 part 2 and with the maximum strain values measured in each test. Further a large number of forming limit curves were determined and used for a comparison of these different methods to define the most promising time dependent algorithm, which was selected as a suggestion for the working group defining the new proposed ISO standard 12004 part 2.
Basic research concerning the material properties of the hot stamping steel 22MnB5 has been carried out. A survey is given about the as-delivered conditions with hardness tests, micrographs and flow curves. The process window of the austenitization time, before hot stamping can take place, is defined by austenitization tests. Also a new experimental set-up to detect the cooling rate in dependency on the contact pressure is presented. In addition to that the cooling experiments were simulated with ABAQUS and the heat transfer coefficient for each contact pressure is determined by inverse modeling.
1 April 2010 in International Journal of Material Forming