Cyber-physical systems (CPS) offer great potential for the digital transformation of industrial value creation in the context of Industry 4.0. They unify and integrate several technological approaches, including big data analysis and artificial intelligence, enhancing real-time monitoring and control of manufacturing processes. An extensive knowledge base formed by various disciplines, including information systems, engineering, and computer science, already exists for CPS. However, this knowledge has not been holistically captured and structured to date. To address this research gap, this study conducts a large-scale literature review of 2365 papers representing the current state of the research and then develops a novel categorization on industrial CPS with 10 sections, 32 areas, and 246 fields. The categorization is presented in hierarchical graphical form and can also be utilized as a web tool. To conclude, a perspective on future research needs and potentials to enhance Industry 4.0 in both research and practice are offered.
In many industrials field, especially in the automotive sector, there is a trend toward lightweight constructions in order to reduce the weight and thereby the CO2 and NOx emissions of the products. An auspicious approach within this context is the substitution of conventional deep drawing steel by precipitation hardenable aluminum alloys. However, based on the low formability, the application for complex stamping parts is challenging. Therefore, at the Institute of Manufacturing Technology, an innovative technology to enhance the forming limit of these lightweight materials was invented. The key idea of the so-called Tailor Heat Treated Blanks (THTB) is optimization of the mechanical properties by local heat treatment before the forming operation. An accurate description of material properties is crucial to predict the forming behavior of tailor heat treated blanks by simulation. Therefore, within in this research project, a holistic approach for the design of the THTB process in dependency of the main influencing parameters is presented and discussed in detail. The capability of the approach for the process development of complex forming operations is demonstrated by a comparison of local blank thickness of a tailgate with the corresponding results from simulation.
Due to the increasing use of multi-material constructions and the resulting material incompatibilities, mechanical joining technologies are gaining in importance. The reasons for this are the variety of joining possibilities as well as high load-bearing capacities. However, the currently rigid tooling systems cannot react to changing boundary conditions, such as changed sheet thicknesses or strength. For this reason, a large number of specialised joining processes have been developed to expand the range of applications. Using a versatile self-piercing riveting process, multi-material structures are joined in this paper. In this process, a modified tool actuator technology is combined with multi-range capable auxiliary joining parts. The multi-range capability of the rivets is achieved by forming the rivet head onto the respective thickness of the joining part combination without creating a tooling set-up effort. The joints are investigated both experimentally on the basis of joint formation and load-bearing capacity tests as well as by means of numerical simulation. It turned out that all the joints examined could be manufactured according to the defined standards. The load-bearing capacities of the joints are comparable to those of conventionally joined joints. In some cases the joint fails prematurely, which is why lower energy absorptions are obtained. However, the maximum forces achieved are higher than those of conventional joints. Especially in the case of high-strength materials arranged on the die side, the interlock formation is low. In addition, the use of die-sided sheets requires a large deformation of the rivet head protrusion, which leads to an increase in stress and, as a result, to damage if the rivet head. However, a negative influence on the joint load-bearing capacity could be excluded.
In the era of smart manufacturing, modern manufacturing systems face high demands for enhancing process performance and reducing machine downtime. Sensors and process data are essential for successfully implementing data-driven approaches to guarantee robust and reliable process monitoring, tool conditioning, or quality assurance. However, the accuracy and performance of such approaches are highly dependent on the quality of the gathered sensor data and influenced by the implemented data acquisition and processing methods. For this purpose, this work proposes a lightweight sensor ontology to provide a comprehensive overview to characterize underlying relationships between the physical environment and the quality of the data sets. The extended sensor ontology, in combination with domain knowledge, aims to support engineers in fully exploiting the potential of sensor data to obtain trustworthy data sets in forming technologies. As a result, this approach can improve the implementation of automated and data-driven process monitoring of forming systems and tools.
1 November 2019 in IOP Conference Series: Materials Science and Engineering
An increasingly connected production in the sense of Industry 4.0 allows completely new possibilities in regard to improved and more efficient production and higher product quality. But a key factor to Industry 4.0 is a consistent data flow along the production chain. However, the exchange of data, especially between companies, still is a major obstacle to overcome in order to achieve the aforementioned advantages. Currently, there are increasing efforts to record and analyse data. But there is a lack of a holistic system to handle data, therefore commonly company databases or other inefficient methods are used. These solutions are limited with regard to data exchange since the ownership of data cannot be proven, production data has no unforgeable timestamp, which in turn hinders the generation of complete production history from the final product (e.g., car door) back to the semi-finished product (e.g., steel sheet). As a result, there is insufficient to no data exchange along the production chain. In order to solve these problems blockchain is a promising approach. At the Institute of Manufacturing Technology, an operational blockchain system was developed and implemented using standard production machines. With the combination of a quarto rolling mill and a 400t - press, representing the sheet metal supplier and a forming company, respectively, the typical process chain of sheet metal processing is represented, which allows the detailed investigation of the established blockchain in this field of application. Within this contribution, the conceptual approach of a blockchain system for forming technology will be presented. The nature and the classification of occurring data throughout the production chain will be addressed.