Current study solves heat transfer and fluid flow problem in Newtonian and non-Newtonian nano-fluids through a permeable surface with a magnetic field effects which is done in the presence of injection and suction for the first time. In order to solve the governing partial differential equations numerically, we used the Runge-Kutta Fehlberg (RKF45) technique in which the similarity transformation method is applied. This approach converts the governing partial differential equations into ordinary differential equations. In this particular investigation nano-particles of copper, copper oxide, titanium dioxide, and aluminium oxide are studied by considering CMC/water as a base fluid with the effect of magnetic field on the classical Blasius and Sakiadis flows of nano-fluids. Validation is carried out using the previously obtained numerical findings. We looked at the power-law index (n), the volume fraction () of nano-particles and the permeability parameter () which affects the flow of nano-fluid and the transfer of heat. Non-Newtonian nano-fluid demonstrates superior performance in terms of heat transfer when compared to Newtonian nano-fluid in both the injection and the impermeable surfaces. Altering the nano-particles’ composition, on the other hand, has a far greater impact on the heat transfer process that occurs during suction. Graphics show the impacts of governing physical parameters on Blasius and Sakiadis flow velocity, temperature, skin friction coefficient, and reduced Nusselt number. Physical and engineering interest are explored in detail.
Nanoparticles are useful in improving the efficiency of convective heat transfer. The current study addresses this gap by making use of an analogy between AlO and -AlO nanoparticles in various base fluids across a stretched sheet conjunction with f. Base fluids include ethylene glycol and water. We address, for the first time, the stagnation-point flow of a boundary layer of -AlO nanofluid over a stretched sheet with slip boundary condition. AlO nanofluids employ Brinkman viscosity and Maxwell’s thermal conductivity models with thermal radiations, whereas -AlO nanofluids use viscosity and thermal conductivity models generated from experimental data. For the boundary layer, the motion equation was solved numerically using the fourth-order Runge–Kutta method and the shooting approach. Plots of the velocity profile, temperature profile, skin friction coefficient and reduced Nusselt number are shown. Simultaneous exposure of the identical nanoparticles to water and ethylene glycol, it is projected, would result in markedly different behaviors with respect to the temperature profile. Therefore, this kind of research instills confidence in us to conduct an analysis of the various nanoparticle decompositions and profile structures with regard to various base fluids.
13 January 2025 in Partial Differential Equations in Applied Mathematics
This research examines mixed convection phenomena in stagnation point flow of a Casson hybrid nanofluid, exploring the synergistic effects of magnetic fields and thermal source/sink configurations. The study employs a water-based nanofluid system enhanced with copper (Cu) and aluminum oxide (Al2O3) nanoparticles flowing adjacent to a vertical surface. Using numerical methods with MATLAB’s shooting technique, we develop and solve a mathematical model that captures the complex interplay between electromagnetic forces and thermal gradients. The investigation advances current knowledge by simultaneously analyzing magnetic and thermal in fluences on hybrid nanofluid behavior, an underexplored area in contemporary research. Critical performance metrics such as velocity profiles, thermal distributions, skin friction, and Nusselt numbers are systematically evaluated. Results indicate that the hybrid nanofluid configuration achieves substantially improved thermal conductivity (up to 18% enhancement) compared to conventional fluids, with particular relevance to affordable and clean energy through optimized heat exchanger applications. The analysis of boundary layer dynamics provides fundamental insights into transport mechanisms, supporting Industry, Innovation and Infrastructure by informing next generation thermal management solutions. These findings offer significant potential for advancing energy-efficient technologies in power generation and industrial cooling systems, contributing to both responsible consumption and production through improved energy conversion efficiency.