For the purpose of understanding, the governing system of partial differential equations for synovial fluid flow velocity and temperature distribution in the knee joint has been successfully solved for the first time. Therefore, such an article is shedding light on the convective diffusion of the viscous flow along the articular surfaces of the joints through the introduction of power-law fluids with different features of permeability, and stagnation point flow along a magnetic field. Henceforth, the frictional energy causes the knee joint’s temperature to increase. By way of filtration, heated synovial fluid reaches the articular cartilage and provides heat to the bone and cartilage. The lubricant in the joint cavity is properly mixed with this cooled fluid. A rectangular region flow and diffusion model is used to define the issue, thermal diffusion and flow inside the intra-articular gap, as well as flow and thermal diffusion within the porous matrix covering the approaching bones at the joint. Using the similarity solution approach, the linked mixed boundary value problem is addressed. The fluid has been shown to resist moving into or out of the cartilage in certain sick and/or aging synovial joints, causing the temperature to increase. By changing the values of the parameters from their usual levels, it is observed that the temperature did increase in aged and sick joints which impact cartilage and/or synovial fluid degradation.
Current study solves heat transfer and fluid flow problem in Newtonian and non-Newtonian nano-fluids through a permeable surface with a magnetic field effects which is done in the presence of injection and suction for the first time. In order to solve the governing partial differential equations numerically, we used the Runge-Kutta Fehlberg (RKF45) technique in which the similarity transformation method is applied. This approach converts the governing partial differential equations into ordinary differential equations. In this particular investigation nano-particles of copper, copper oxide, titanium dioxide, and aluminium oxide are studied by considering CMC/water as a base fluid with the effect of magnetic field on the classical Blasius and Sakiadis flows of nano-fluids. Validation is carried out using the previously obtained numerical findings. We looked at the power-law index (n), the volume fraction () of nano-particles and the permeability parameter () which affects the flow of nano-fluid and the transfer of heat. Non-Newtonian nano-fluid demonstrates superior performance in terms of heat transfer when compared to Newtonian nano-fluid in both the injection and the impermeable surfaces. Altering the nano-particles’ composition, on the other hand, has a far greater impact on the heat transfer process that occurs during suction. Graphics show the impacts of governing physical parameters on Blasius and Sakiadis flow velocity, temperature, skin friction coefficient, and reduced Nusselt number. Physical and engineering interest are explored in detail.
This research paper represents a numerical approximation to non-linear three dimension reaction diffusion equation with non-linear source term from population genetics. Since various initial and boundary value problems exist in three dimension reaction diffusion phenomena, which are studied numerically by different numerical methods, here we use finite difference schemes (Alternating Direction Implicit and Fourth Order Douglas Implicit) to approximate the solution. Accuracy is studied in term of L2, and relative error norms by random selected grids along time levels for comparison with analytical results. The test example demonstrates the accuracy, efficiency and versatility of the proposed schemes. Numerical results showed that Fourth Order Douglas Implicit scheme is very efficient and reliable for solving 3-D non-linear reaction diffusion equation.
In this article, efficient numerical schemes for the two dimensional Gray Scott model are presented. The Gray Scott model presents self-replicating patterns such as spots and strips. These pattern formulations are suitable interplay between diffusion and reactions in which the coupled partial differential system is solved by using three finite difference schemes to enhance accuracy while maintaining stability of the system. The stability analysis is performed on stationary points whereas the analytical solution is compared with the numerical schemes, such as Douglas implicit fourth and sixth order compact difference schemes. The later two schemes are implemented for first time on such a system for analyzing error residuals and system efficiency. It is predicted that the efficiency is upgraded by Thomas block tridiagonal solver, which leads to an excellent improvement in accuracy measured by L∞ norm.
Nanoparticles are useful in improving the efficiency of convective heat transfer. The current study addresses this gap by making use of an analogy between AlO and -AlO nanoparticles in various base fluids across a stretched sheet conjunction with f. Base fluids include ethylene glycol and water. We address, for the first time, the stagnation-point flow of a boundary layer of -AlO nanofluid over a stretched sheet with slip boundary condition. AlO nanofluids employ Brinkman viscosity and Maxwell’s thermal conductivity models with thermal radiations, whereas -AlO nanofluids use viscosity and thermal conductivity models generated from experimental data. For the boundary layer, the motion equation was solved numerically using the fourth-order Runge–Kutta method and the shooting approach. Plots of the velocity profile, temperature profile, skin friction coefficient and reduced Nusselt number are shown. Simultaneous exposure of the identical nanoparticles to water and ethylene glycol, it is projected, would result in markedly different behaviors with respect to the temperature profile. Therefore, this kind of research instills confidence in us to conduct an analysis of the various nanoparticle decompositions and profile structures with regard to various base fluids.
The numerical solution of reaction diffusion systems may require more computational efforts if the change in concentrations occurs extremely rapid. This is because more time points are needed to resolve the reaction diffusion process accurately. In this article three finite difference implicit schemes are used which are unconditionally stable in order to enhance consistency. Novelty is reported by compact finite difference implicit scheme on reaction diffusion system with higher accuracy measured by L2,L∞ & Relativeerror norms. Efficiency is observed by reducing grid space along small temporal steps. CPU performance, transmission capacity along comparison of three schemes shows excellent agreement with analytical solution.