Ceramic fibers have the advantages of high temperature resistance, light weight, favorable chemical stability and superior mechanical vibration resistance, which make them widely used in aerospace, energy, metallurgy, construction, personal protection and other thermal protection fields. Further refinement of the diameter of conventional ceramic fibers to microns or nanometers could further improve their thermal insulation performance and realize the transition from brittleness to flexibility. Processing traditional two-dimensional (2D) ceramic fiber membranes into three-dimensional (3D) ceramic fiber aerogels could further increase porosity, reduce bulk density, and reduce solid heat conduction, thereby improving thermal insulation performance and expanding application areas. Here, a comprehensive review of the newly emerging 2D ceramic micro-nanofiber membranes and 3D ceramic micro-nanofiber aerogels is demonstrated, starting from the presentation of the thermal insulation mechanism of ceramic fibers, followed by the summary of 2D ceramic micro-nanofiber membranes according to different types, and then the generalization of the construction strategies for 3D ceramic micro-nanofiber aerogels. Finally, the current challenges, possible solutions, and future prospects of ceramic micro-nanofiber materials are comprehensively discussed. We anticipate that this review could provide some valuable insights for the future development of ceramic micro-nanofiber materials for high temperature thermal insulation.
Nanofibrous materials are considered as promising candidates for fabricating high-efficiency chromatography media, which are urgently needed in protein pharmaceuticals purification and biological research, yet still face several bottlenecks. Herein, novel negatively charged composite nanofibrous hydrogel membranes (NHMs) are obtained by a facile combination of electrospinning and surface coating modification. The resulting NHMs exhibit controllable morphologies and chemical structures. Benefitting from the combined effect of the stable framework of silicon dioxide (SiO2) nanofiber and the function layer of negatively charged hydrogel, as well as good pore connectivity among nanofibers, NHMs exhibit a high protein adsorption capacity of around 1000 mg g−1, and are superior to the commercial cellulose fibrous adsorbent (Sartobind®) and the reported nanofibrous membranous adsorbents. Moreover, due to their relatively stable physicochemical and mechanical properties, NHMs possess comprehensive adsorption performance, favorable resistance to acid and solvents, good selectivity, and excellent regenerability. The designed NHMs composite adsorbents are expected to supply a new protein chromatography platform for effective protein purification in biopharmaceuticals and biochemical reagents.
The excessive utilization of antimicrobials in humans and animals has resulted in considerable environmental contamination, necessitating the development of high-performance antibiotic adsorption media. A significant challenge is the development of composite nanofibrous materials that are both beneficial and easy to fabricate, with the aim of improving adsorption capacity. Herein, a new kind of zeolitic imidazolate framework-8 (ZIF-8)-modified regenerated cellulose nanofibrous membrane (ZIF-8@RC NFM) was designed and fabricated by combining electrospinning and in situ surface modification technologies. Benefiting from its favorable surface wettability, enhanced tensile strength, interconnected porous structure, and relatively large specific surface area, the resulting ZIF-8@RC NFMs exhibit a relatively high adsorption capacity for tetracycline hydrochloride (TCH) of 105 mg g−1 within 3 h. Moreover, a Langmuir isotherm model and a pseudo-second-order model have been demonstrated to be more appropriate for the description of the TCH adsorption process of ZIF-8@RC-3 NFMs. Additionally, this composite fibrous material could keep a relatively stable adsorption capability under various ionic strengths. The successful fabrication of the novel ZIF-8@RC NFMs may shed light on the further development of wastewater adsorption treatment materials.
Fabricating dye adsorbents with efficient adsorption properties is of great significance in the treatment of printing and dyeing wastewater. Herein, composite materials of polydopamine decorated cellulose fibrous nonwovens (PDA@CF NWs) were fabricated by constructing a PDA functional layer on the surface of cellulose fibers via in situ polymerization. In addition, a three-dimensional adsorbent of 3D PDA@CF NWs with good hydrophilicity, structural stability, and compression resistance could be obtained using a facilely laminating and traditional loop bonding reinforcing technique. Attributed to the efficient and uniform loading of an active PDA functional layer, the resulting PDA@CF NWs exhibited a relatively large adsorption capacity of around 91 mg g−1 towards the template dye of methylene blue within a fast equilibrium time of 2 h, which was superior to most of the fibrous adsorbents. In addition, the treatment column of 3D PDA@CF NWs exhibited a breakthrough capacity of 40.9 mg g−1, reaching nearly 50% of the static saturated dye-binding capacity. More importantly, the 3D PDA@CF NWs column could effectively and continuously separate the mixture of different dyes under gravity, highlighting an excellent practical performance. Thus, the PDA@CF NWs are expected to provide a promising candidate for environment-friendly, large-scale and efficient treatment of industrial printing and dyeing wastewater.
Ceramic nanofiber-based materials have wide applicability in high-temperature management and protection. The transformation of conventional two-dimensional ceramic nanofibrous membranes into three-dimensional nanofiber-based bulks can effectively improve their thermal insulation performance and expand their range of applications. Herein, lamellar-structured Al2O3-SiO2 nanofibrous aerogels (LASO NFAs) with varying inorganic binder contents were prepared via a sequence of processes involving face-to-face stacking, impregnation, and calcination, using flexible Al2O3-SiO2 nanofibrous membranes (ASO NFMs) as building units and aluminum dihydrogen phosphate as an inorganic binder. Varying the inorganic binder content in the aerogel matrix enables effective control over the compressive properties and interlayer spacing of the resulting aerogels. Specifically, the optimized LASO-20 NFAs demonstrated relatively good compression resilience, with a plastic deformation of 22.1% after undergoing 500 compressive cycles at a compressive strain of 50%. Moreover, profiting from the high-temperature resistance of ASO NFMs and substantial air content present within nanofiber interlayers, the LASO-20 NFAs with a thickness of 20 mm could effectively insulate against surface temperatures of 1000 °C down to 224 °C. Moreover, LASO-20 NFAs exhibited a room-temperature thermal conductivity of approximately 0.043 W·m−1·K−1, illustrating a favorable high-temperature thermal insulation characteristic. Furthermore, the LASO-20 NFAs presented promising service performance in extreme environments, providing a novel perspective in the development of new types of ceramic aerogels.
About Me
Dr. Fu is currently engaged in the study of functional nanofiber materials and their applications.
Dr. Fu is currently engaged in the study of functional nanofiber materials and their applications.