Wenhan Sun

Mr. Wenhan Sun


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 August 2021 in Scientific Reports
Verified
Journal Article
Open access
PDF file
PLPengcheng Li
Pengcheng Li
SDShujuan Dai
Shujuan Dai
WSWenhan Sun
Wenhan Sun
MFMingyang Fan
Mingyang Fan
The floatability of magnesite, dolomite and quartz is a major factor affecting the removal of silicon and calcium from magnesite ore. The effect of the regulators sodium hexametaphosphate (SH), sodium silicate (SS), trisodium phosphate (TP), tannic acid (TN) and monoammonium oxalate (OA) on the floatability of magnesite, dolomite, and quartz under the ether amine (EAH) system was studied. The results show that the five regulators have relatively little influence on the floatability of quartz and magnesite. Dolomite can be activated when the dosage of SH is less than 40 mg/L; however, dolomite can be inhibited when the SH dosage is greater than 40 mg/L. The other four regulators have inhibitory effects on dolomite, and TN and TP have strong inhibitory effects on dolomite. Under the conditions of optimum grinding fineness, pH and collector dosage, a recovery of approximately 70% and a concentrate with a grade of over 47% were obtained by three stages of reverse flotation using sodium hexametaphosphate and water glass as regulators and Haicheng magnesite ore with an SiO2 content of 2.38% and a CaO content of 0.75%. Potentiometric measurements and infrared spectroscopy analysis show that physical adsorption occurs between the three minerals and collectors, while the interaction of magnesite and dolomite with SH and SS involves both physical adsorption and chemical adsorption.

17 June 2022 in Minerals
Verified
Journal Article
Open access
PDF file
WSWenhan Sun
Wenhan Sun
JYJinlin Yang
Jinlin Yang
HLHengjun Li
Hengjun Li
Wengang LiuWengang Liu
Wengang Liu
SMShaojian Ma
Shaojian Ma
Semi-autogenous (SAG) mills are widely used grinding equipment, but some ore with critical particle sizes cannot be effectively processed by SAG mills and turned into pebbles. This research aims to analyze and compare the properties of raw ore and pebbles from a zinc- and tin-bearing ore. The results show that the contents of sphalerite, cassiterite, biotite, antigorite, pyroxferroite, ferroactinolite, and ilvaite in the raw ore are higher than those in the pebbles, and that the pebbles have higher contents of hedenbergite, chlorite, epidote, actinolite, etc. Meanwhile, the abrasion and impact resistance of pebbles is greater than that of the raw ore. In addition, the sphalerite is evenly embedded, and the grinding process is regular. Fine cassiterite associated with harder minerals is difficult to dissociate; it is often found in softer or brittle minerals which may be easily ground into ore mud. The cassiterite in the pebbles is associated with hard and brittle hedenbergite and soft chlorite, making it difficult to recover. This research provides a good foundation for evaluating the recovery value of pebbles and improving the productivity of the SAG process.