Shujuan Dai

Prof. Dr. Shujuan Dai

School of Mining Engineering, University of Science & Technology of Liaoning, Shenyang 114051, China

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 February 2022 in Advanced Powder Technology
Verified
Journal Article
Closed access
XLXiangyang Li
Xiangyang Li
TMTian Ma
Tian Ma
LDLixin Dong
Lixin Dong
YNYu Na
Yu Na
YLYumo Liu
Yumo Liu
TZTonglin Zhao
Tonglin Zhao

26 July 2024 in Separations
Verified
Journal Article
Open access
PDF file
JHJiahong Han
Jiahong Han
SDShujuan Dai
Shujuan Dai
Jiushuai DengJiushuai Deng
Jiushuai Deng
SQShandong Que
Shandong Que
YZYugao Zhou
Yugao Zhou
Cyanide leaching technology was studied for low-grade oxidized gold ores in Guangxi Province. The gold grade of the raw ores was 1.32 g/t. The gold leaching rate was 90.91% under the optimal conditions for the following conventional leaching process: using steel forging as the grinding medium, a grinding fineness of −0.074 mm accounting for 92.53%, a stirring speed of 1500 r/min, a pulp leaching concentration of 28.57%, a pH value of 10.5, a temperature of 25 °C, a leaching time of 24 h, and a potassium cyanide consumption of 4 kg/t. A new type of mixed aid-leaching agent (0.6 kg/t) was used, with a dosage of potassium cyanide of 2 kg/t. All else being equal, the gold leaching rate increased by 2.17% to 93.20% after 18 h of aid leaching compared to that of conventional leaching for 28 h. Meanwhile, the amount of potassium cyanide used was reduced by 50%. The aid-leaching agents restored the surface activity of passivated gold particles and depressed the adsorption of gold and its complexes by gangue minerals. This approach could shorten the leaching time and increase the gold leaching rate.

1 January 2021 in Adsorption Science & Technology
Verified
Journal Article
Open access
PDF file
JHJiahong Han
Jiahong Han
XLXiaoan Li
Xiaoan Li
SDShujuan Dai
Shujuan Dai
GLGuozhen Liu
Guozhen Liu
In order to reduce the iron impurities in magnesite ore and improve the purity of magnesium products, the difference in floatability between magnesite and limonite has been studied by using mixtures with a collecting agent—KD (cationic amine collectors, containing soluble components). Sodium hexametaphosphate, pH, sodium silicate, and sodium carboxymethyl cellulose were used as regulators. Adsorption mechanisms of the reagents on minerals were analyzed by a zeta potential analyzer and infrared spectroscopy. Sodium silicate increased the floatability of both minerals at 11.6. All the three regulators reduced the zeta potential of both minerals, while KD increased the zeta potential of magnesite and decreased the zeta potential of limonite. All the three regulators were likely chemically adsorbed on the surface of both minerals; KD has electrostatic adsorption on the surface of the minerals.

20 August 2021 in Scientific Reports
Verified
Journal Article
Open access
PDF file
PLPengcheng Li
Pengcheng Li
SDShujuan Dai
Shujuan Dai
WSWenhan Sun
Wenhan Sun
MFMingyang Fan
Mingyang Fan
The floatability of magnesite, dolomite and quartz is a major factor affecting the removal of silicon and calcium from magnesite ore. The effect of the regulators sodium hexametaphosphate (SH), sodium silicate (SS), trisodium phosphate (TP), tannic acid (TN) and monoammonium oxalate (OA) on the floatability of magnesite, dolomite, and quartz under the ether amine (EAH) system was studied. The results show that the five regulators have relatively little influence on the floatability of quartz and magnesite. Dolomite can be activated when the dosage of SH is less than 40 mg/L; however, dolomite can be inhibited when the SH dosage is greater than 40 mg/L. The other four regulators have inhibitory effects on dolomite, and TN and TP have strong inhibitory effects on dolomite. Under the conditions of optimum grinding fineness, pH and collector dosage, a recovery of approximately 70% and a concentrate with a grade of over 47% were obtained by three stages of reverse flotation using sodium hexametaphosphate and water glass as regulators and Haicheng magnesite ore with an SiO2 content of 2.38% and a CaO content of 0.75%. Potentiometric measurements and infrared spectroscopy analysis show that physical adsorption occurs between the three minerals and collectors, while the interaction of magnesite and dolomite with SH and SS involves both physical adsorption and chemical adsorption.

17 September 2025 in ACS Omega
Verified
Journal Article
Open access
ZLZiyuan Liu
Ziyuan Liu
SDShujuan Dai
Shujuan Dai
PLPengcheng Li
Pengcheng Li
LDLixin Dong
Lixin Dong
FYFangyuan Yang
Fangyuan Yang
JLJingchun Luan
Jingchun Luan
To investigate the impact of oxidation on the floatability and surface properties of chalcopyrite, the influence of oxidation on its surface properties was investigated using Fourier transform infrared, zeta potential detection, contact angle tests, and X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy-energy dispersive spectrometry (SEM-EDS) analysis. The pH value of the pulp, the dosage of the collectors, and the change in the floatability of chalcopyrite in water and in aqueous solutions of KMnO4, H2O2, and NaClO were investigated. The optimal pH value for floating is around 4 in the chalcopyrite pulp, with ideal dosages of 100 and 125 g/t for butyl xanthate and ammonium dibutyl dithiophosphate, respectively. Deep oxidation will lead to the decline of the chalcopyrite flotation rate. Contact angle, infrared spectroscopy, and zeta potential detection show that slight oxidation improves the floatability of chalcopyrite, while excessive oxidation depresses it. Chemical and physical adsorption occurs between chalcopyrite and the two collectors. An XPS test showed that the valence state of the S element increases after oxidation. SEM-EDS energy spectrum analysis showed that oxidation reduces the adsorption of the two collectors on chalcopyrite. The results of this study are highly significant in terms of exploring how oxidation affects the floatability and surface properties of chalcopyrite.

2 September 2022 in Scientific Reports
Verified
Journal Article
Open access
PDF file
PLPengcheng Li
Pengcheng Li
XLXiaoan Li
Xiaoan Li
SDShujuan Dai
Shujuan Dai
WSWenhan Sun
Wenhan Sun
BZBin Zhou
Bin Zhou
Dodecylamine is one of the most commonly used amine collectors for the reverse flotation of magnesite ore. Through a combination of experimental research and computational simulation, the effect of n-octanol on the removal of impurities by the reverse flotation of magnesite ore was studied. The test results show that when the dosage of dodecylamine was 60 mg/L, the flotation rates of magnesite and dolomite were 59.53% and 58.02%, respectively, and the flotation rate of quartz was 97.60%. In the presence of n-octanol, the flotation rate of magnesite decreased to 56.41%, and the flotation rates of dolomite and quartz increased to 61.30% and 99.59%, respectively. The test results show that the addition of n-octanol can improve the selectivity of minerals under the same amount of collector. The adsorption of dodecylamine (dodecylamine and n-octanol) on the surface of magnesite, dolomite and quartz was simulated using quantum chemical calculations based on density functional theory (DFT) and implemented in the CASTEP module of Materials Studio. The results show that dodecylamine can adsorb to magnesite, dolomite and quartz, and the adsorption effect was strongest on quartz. After adding n-octanol, the population value of the bond between the agent and magnesite decreased from 0.19 to 0.17, indicating that the adsorption effect of the agent on magnesite was weakened. The population value of the bond between the drug and dolomite increased from 0.19 to 0.23, indicating that the adsorption effect of the drug on dolomite was enhanced. H28, H29, and H2 in the drug form bonds with O12, O20, and O20 on the surface of quartz (101), respectively, and the population values were 0.43, 0.25, and 0.09, respectively. The adsorption sites of the drug and the quartz were increased, and the adsorption effect of the quartz was markedly improved. The test and simulation results show that the dosage of the agent can be reduced in the presence of n-octanol. N-octanol is not only beneficial to the removal of silicon by amine reverse flotation but also has a certain beneficial effect on the removal of calcium by reverse flotation.