The construction of Pohang Accelerator Laboratory X-ray Free-Electron Laser (PAL-XFEL), a 0.1-nm hard X-ray free-electron laser (FEL) facility based on a 10-GeV S-band linear accelerator (LINAC), is achieved in Pohang, Korea by the end of 2016. The construction of the 1.11 km-long building was completed by the end of 2014, and the installation of the 10-GeV LINAC and undulators started in January 2015. The installation of the 10-GeV LINAC, together with the undulators and beamlines, was completed by the end of 2015. The commissioning began in April 2016, and the first lasing of the hard X-ray FEL line was achieved on 14 June 2016. The progress of the PAL-XFEL construction and its commission are reported here.

We demonstrate a remote microwave/radio frequency (RF) transfer technique based on the stabilization of a fiber link using a fiber-loop optical-microwave phase detector (FLOM-PD). This method compensates for the excess phase fluctuations introduced in fiber transfer by direct phase comparison between the optical pulse train reflected from the remote site and the local microwave/RF signal using the FLOM-PD. This enables sub-fs resolution and long-term stable link stabilization while having a wide timing detection range and less of a demand in fiber dispersion compensation. The demonstrated fractional frequency instability between 2.856 GHz RF oscillators separated by a 2.3 km fiber link is $7.6\times {10}^{-18}$ and $6.5\times {10}^{-19}$ at 1000 and 82,500 s averaging times, respectively.

Optical laser systems for ultrafast X-ray sciences have been established at the Pohang Accelerator Laboratory X-ray Free-Electron Laser (PAL-XFEL) beamlines. Three Ti:sapphire regenerative amplifier systems are synchronized to the XFEL with femtosecond precision, and the low temporal jitter of the PAL-XFEL results in an experimental time resolution below 150 fs (full width at half-maximum). A fundamental wave and its harmonics are currently provided for all beamlines, and tunable sources from ultraviolet to near-infrared are available for one beamline. The position stability of the optical laser extracted from the intensity-based center of mass at the sample position is less than 3% (r.m.s.) of the spot size.

The X-ray free-electron laser of the Pohang Accelerator Laboratory (PAL-XFEL) was opened to users in 2017. Since then, significant progress has been made in PAL-XFEL operation and beamline experiments. This includes increasing the FEL pulse energy, increasing the FEL photon energy, generating self-seeding FEL, and trials of two-color operation. In the beamline, new instruments or endstations have been added or are being prepared. Overall, beamline operation has been stabilized since its initiation, which has enabled excellent scientific results through efficient user experiments. In this paper, we describe details of the recent progress of the PAL-XFEL.