Quantitative evaluation of different contaminated soil remediation technologies in multiple dimensions is beneficial for the optimization and comparative selection of technology. Ex situ thermal desorption is widely used in remediation of organic contaminated soil due to its excellent removal effect and short engineering period. In this study, a comprehensive evaluation method of soil remediation technology, covering 20 indicators in five dimensions, was developed. It includes the steps of constructing an indicator system, accounting for the indicator, normalization, determining weights by analytic hierarchy process, and comprehensive evaluation. Three ex situ thermal desorption technology—direct thermal desorption, indirect thermal desorption, and indirect thermal heap—in China were selected for the model validation. The results showed that the direct thermal desorption had the highest economic and social indicator scores of 0.068 and 0.028, respectively. The indirect thermal desorption had the highest technical and environmental indicator scores of 0.118 and 0.427, respectively. The indirect thermal heap had the highest resource indicator score of 0.175. With balanced performance in five dimensions, the indirect thermal desorption had the highest comprehensive score of 0.707, which is 1.6 and 1.4 times higher than the direct thermal desorption and indirect thermal heap, respectively. The comprehensive evaluation method analyzed and compared the characteristics of the ex situ thermal desorption technology from different perspectives, such as specific indicators, multiple dimensions, and single comprehensive values. It provided a novel evaluation approach for the sustainable development and application of soil remediation technology.
Uranium and arsenic are two pollutants commonly found in groundwater near uranium mines. However, the reactivity of U(VI) and As(V) need to be carefully investigated to better understand their fate and transport in the environment. In this study, the reactivity of U(VI) and As(V) were studied under various pH, bicarbonate, and Ca2+ levels. In air-equilibrated systems, the reactivity of U(VI) and As(V) generally decreased with the increase in pH, as evidenced by the solubility of U(VI) and As(V) increasing along with the elevation of pH. At pH = 8, 44.70% and 37.81% of initially added U(VI) and As(V) remained soluble. The addition of 1 mM of bicarbonate increased the reactivity of U(VI) and As(V) at mild acidic to neutral pH; however, the presence of bicarbonate significantly increased the solubility of U(VI) at mild alkaline condition, as nearly all U(VI) remained soluble at pH values of 8 and 9. After the addition of Ca2+, the solubility of both U(VI) and As(V) decreased at mild acidic to neutral pH ranges; however, the addition of Ca2+ markedly increased the soluble percentages of U(VI) at neutral pH, in which the condition 97.81 ± 2.95% of U(VI) remained soluble. Comparatively, only 36.13 ± 4.98% and 1.69 ± 1.08% of U(VI) were soluble at the same pH in air-equilibrated and bicarbonate systems. Our study demonstrated that U(VI) and As(V) are less reactive at neutral to alkaline conditions. Furthermore, the addition of bicarbonate and Ca2+ can further reduce the reactivity of U(VI) and As(V) at neutral to alkaline conditions. The findings of this study contribute to a deeper understanding of the fate and transport of U(VI) and As(V) in groundwater and could aid in better designing of U(VI) and As(V) removal processes.
Per- and polyfluoroalkyl substances (PFAS) have concerned the public due to their worldwide distribution and the threat they pose to drinking water safety and human health. Temperature and DC field-induced electroosmotic flow (EOF) are powerful tools to regulate organic contaminant adsorption and control PFOS (as a typical PFAS) transport in porous media. However, the co-driven mechanisms of temperature–electrokinetic transport of contaminants are still unclear. Here, we investigated the synergistic mechanisms of temperature–electrokinetic co-driven PFOS adsorption on zeolite and activated carbon as model geo-adsorbents. We found that DC fields increased PFOS adsorption on activated carbon by up to 19.8%, while they decreased PFOS adsorption on zeolite by up to 21.4%. Increasing the temperature decreased the adsorption of PFOS by activated carbon and zeolite. The temperature and electrokinetic synergistically drive EOF velocity to control PFOS adsorption. Synergistic mechanisms of temperature–electrokinetic regulated kinetic and temperature-regulated thermodynamic (the Gibbs free energy change ΔG) and kinetic (liquid viscosity) under various temperatures and DC field situations were analyzed with models. A kinetic approach interlinking viscosity, EOF velocity, and the kinetic adsorption constants was established to interpret the synergistic mechanisms which can be further adopted to estimate temperature–electrokinetic induced PFOS adsorption benefits to mineral and carbonaceous adsorbents. We concluded that such kinetic regulation may provide support for controlling the transmission of PFOS.