He Jiahuan

Dr. He Jiahuan

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2020 in Interpretation
Verified
Journal Article
Closed access
HJHe Jiahuan
He Jiahuan
MLMin Li
Min Li
KZKeming Zhou
Keming Zhou
LZLi Zeng
Li Zeng
NLNong Li
Nong Li
MHMei Huang
Mei Huang
Electrical resistivity is one of the fundamental physical properties of rocks, and its relationship with fluid saturation is widely used in reservoir evaluation. The interpretation of electrical logs usually relies on the results of rock resistivity tests of cores in the laboratory. In the laboratory, core samples are commonly cut into cylinders, and the resistivity is measured along the axial direction. To determine the rock resistivity along different directions, samples are cut into cubes and tested along three perpendicular directions to obtain resistivity data. The expensive and complicated preparation process of cubic samples and the custom holder requirements limit the use of these tests. We have analyzed the advantages and disadvantages of rock resistivity measurements of cylindrical and cubic samples. To overcome the abovementioned difficulties, we develop a core holder for radial resistivity measurements and a radial resistivity measurement method for cylindrical samples. Based on the conformal transformation of the complex variable function theory, we establish a mathematical model of radial resistivity. We develop a measurement method of radial resistivity according to the mathematical model and verify this approach with isotropic cores. The theoretical calculation results agree with the experimental results. With the radial resistivity measurement method, we effectively test the resistivity anisotropy of shale. This method has more advantages than existing methods in terms of the sample preparation and realization of various displacement levels and angles. Hence, the proposed method can be widely used.

19 April 2024 in Minerals
Verified
Journal Article
Open access
PDF file
HJHe Jiahuan
He Jiahuan
WZWei Zhang
Wei Zhang
DZDan Zhao
Dan Zhao
NLNong Li
Nong Li
QKQiang Kang
Qiang Kang
WLWei Long
Wei Long
The conventional Archie formula struggles with the interpretation of water saturation from resistivity well log data due to the increasing complexity of exploration targets. This challenge has prompted researchers to explore alternative physical parameters, such as acoustic characteristics, for breakthroughs. Clarifying the influencing factors of porous media acoustic characteristics is one of the most important approaches to help understanding the mechanism of acoustic characteristics of carbonate reservoirs. The article uses digital rock technology to characterize the pore structure, quantitatively identify fractures and pore structures in carbonate rocks, and establish digital models. Through conventional acoustic testing, the pressure wave (P-wave) and shear wave (S-wave) velocities of rock samples at different water saturations are obtained, and the dynamic elastic modulus is calculated. A finite element calculation model is established using the digital rock computational model to provide a basis for fluid saturation calculation methods. Based on real digital rock models, different combinations of virtual fractures are constructed, and factors affecting acoustic parameters are analyzed. The study finds that as porosity increases, the velocity difference between porous cores and fractured cores also increases. These findings provide important technical support and a theoretical basis for interpreting acoustic well logging data and evaluating carbonate reservoirs with different pore and fracture types.

22 January 2025 in Advances in Geo-Energy Research
Verified
Journal Article
Open access
PDF file
HJHe Jiahuan
He Jiahuan
LDLurui Dang
Lurui Dang
LWLiangjin Wang
Liangjin Wang
QKQiang Kang
Qiang Kang
BZBenjian Zhang
Benjian Zhang
CZChun Zhang
Chun Zhang
Rocks are the most prevalent material on solid planets, and using physical methods is the most practical and feasible way to explore planetary resources. This is also one of the most commonly used methods for oil and gas exploration on the Earth. However, many challenges remain to be addressed in practice. Based on the practice of oil and gas physical exploration, rock physicists need to answer several questions. This work aims to address these issues by exploring similarities between materials physics and petrophysics. There are some special phenomena in rock physics that can be explained by principles borrowed from materials physics. This work also examines the similarities of porous media in different physical methods, conducts comparative studies on the physical properties of porous media, and analyzes the potential for future exploration using comparative physical property methods. In addition to being applied in petroleum engineering logging and core analysis, petrophysics can also provide insights for the development of new energy and materials, offering valuable guidance for upgrading the energy structure. Document Type: Perspective Cited as: He, J., Dang, L., Wang, L., Kang, Q., Zhang, B., Zhang, C. Exploring the prospects and challenges of petrophysics research from the perspective of materials physics. Advances in Geo-Energy Research, 2025, 16(2): 95-98. https://doi.org/10.46690/ager.2025.05.02

25 August 2022 in Geofluids
Verified
Journal Article
Open access
PDF file
JXJirong Xie
Jirong Xie
HJHe Jiahuan
He Jiahuan
KZKeming Zhou
Keming Zhou
ZTZhijuan Tang
Zhijuan Tang
MCManfei Chen
Manfei Chen
LWLi Wang
Li Wang
In the oil and gas industry, traditional logging mostly deems that oil and gas reservoirs are characterized by high resistivity, whereas the water layer is often by low resistivity. However, a lot of exploration and development practices on shale gas reservoirs in Sichuan Basin, China, prove that it is hard to characterize a functional relation between resistivity and water saturation using the Archie equation. Therefore, to make clear the mechanism to form low resistivity in shale gas reservoirs, the matrix resistivity was calculated through the percolation network simulation based on pore structure characteristics and mineral compositional parameters. Moreover, the resistivity in low-resistivity laminations of shale was measured through the finite element simulation. In addition, the reasons for such low resistivity in shale were analyzed according to the resistivity-forming mechanism, and the effects of penetration degree, width, quantity, and spatial distribution of the laminations on the resistivity were worked out. Those may provide theoretical support for explaining the phenomenon of low-resistivity gas reservoirs.

12 August 2022 in Mathematics
Verified
Journal Article
Open access
PDF file
HJHe Jiahuan
He Jiahuan
TLTangyan Liu
Tangyan Liu
LWLong Wen
Long Wen
THTingting He
Tingting He
MLMin Li
Min Li
XYXin Yao
Xin Yao
Rock resistivity is a major geophysical technical parameter in geological and geotechnical engineering, geothermal prospecting, and oil and gas exploration. Its accurate measurement is of great significance to achieve the goal of “carbon peak and carbon neutrality”. To solve anisotropic problems, a method to test the radial resistivity in cylindrical core samples has been proposed and has been deemed the universal method, as it has the virtues of no specially processed sample being needed and nondestructive testing. However, there is still a difference in the radial resistivities obtained from this method and another testing method that is commonly used for cuboid samples. Furthermore, the differences between these methods have not yet been made clear in China or elsewhere. Therefore, we compared the results of the above-two testing methods via numerical simulations after establishing the potential field distribution, and, in combination with their methodological principles, illustrated the differences between the resistivities determined in samples with distinct shapes obtained using the two testing methods, summarized the conditions when there was zero difference and considerable difference when using the two methods, and provided a theoretical basis for the reasonable selection of an appropriate method to test the resistivity anisotropy.

9 June 2026 in Journal of Geo-Energy and Environment
Verified
Journal Article
Closed access
QKQiang Kang
Qiang Kang
HJHe Jiahuan
He Jiahuan
XTXingwang Tian
Xingwang Tian
HYHongyu Yao
Hongyu Yao
RTRuilong Tang
Ruilong Tang
HYHang Yang
Hang Yang
Oil and gas testing laboratories have long encountered structural challenges including unclear functional roles, the disconnection between research and testing, and ongoing talent attrition, necessitating an intelligent transformation. Embodied intelligence, as an emerging paradigm integrating AI and robotics, features a local inference model of "cloud-device collaboration" that overcomes the limitations of traditional AI detached from the physical environment. Embodied intelligence enables laboratories to transition from "passive testing" to "proactive, intelligence-driven operations". Nonetheless, current deployment remains constrained by high costs and limited technological maturity. A phased, pilot-first implementation strategy is therefore recommended, prioritizing application validation in scenarios such as repetitive testing and high-risk operations. On this basis, the AI-driven "One-Person Laboratory" (OPL)—as a concrete manifestation of the "one-person company" concept within the scientific research domain—is expected to foster a new ecosystem of smart laboratories characterized by human-AI collaboration and complementary strengths, serving as a powerful supplement to the existing research system.