The non-uniform adsorption characteristics of coal strictly restrict the development and utilization of CBM, and the structure of coal is the fundamental reason for its non-uniform adsorption of methane. To investigate the fundamental causes of methane adsorption capacity differences in coal with various meso-structures, small coking coal and lean coal samples were subjected to isothermal adsorption, computed tomography (CT) scanning, scanning electron microscopy (SEM), and mercury intrusion porosimetry (MIP) to obtain the correlation between the meso-structure of coal and its non-uniform adsorption characteristics. The reasons for the differences in methane adsorption capacity between the specimens were summarized from the perspectives of material and structural heterogeneities, meso-morphology and pore size distribution. The following conclusions could be drawn: (1) The coal samples with different heterogeneity degrees exhibit varying methane adsorption capacities. (2) Compared to the specific surface area, the mineral composition exerts a greater influence on the adsorption capacity of the coal samples. (3) The gas adsorption capacities of the coal samples with similar meso-morphology and pore size distribution characteristics are similar, while among the coal samples with similar pore size distributions but different meso-morphologies, the gas adsorption capacities significantly differ.
The creep and stress relaxation behaviors of coal are common in coal mining. The unified constitutive model is suitable to describe and predict both the creep and relaxation evolution characteristics of rocks. The generalized Kelvin model is the core element for traditional and improved component models to reflect both the nonlinear creep and relaxation. In this paper, an improved core damage model, which could both reflect the creep and stress relaxation in relation to the damage evolution, was established based on a comparison of the traditional and improved component models, and the responding constitutive equations (creep and stress relaxation equation) at constant stress/strain were deduced. Then, the core damage model was validated to the uniaxial compressive multistage creep and stress relaxation test results of coal, showing that the model curves had great accordance with the experimental data. Moreover, the model comparisons on accuracy, parameter meaning, and popularization among the core damage model, hardening-damage model, and the fractional derivative model were further discussed. The results showed that the parameters in the core damage model had clear and brief physical significances. The core damage model was also popularized to depict the time-dependent behaviors of other rocks, showing great accuracy.