Precision grinding is a key process for realizing the use of large-aperture aspherical optical elements in laser nuclear fusion devices, large-aperture astronomical telescopes, and high-resolution space cameras. In this study, the arc envelope grinding process of large-aperture aspherical optics is investigated using a CM1500 precision grinding machine with a maximum machinable diameter of Φ1500 mm. The form error of the aspherical workpiece induced by wheel setting errors is analytically modeled for both parallel and cross grinding. Results show that the form error is more sensitive to the wheel setting error along the feed direction than that along the lateral direction. It is a bilinear function of the feed-direction wheel setting error and the distance to the optical axis. Based on the error function above, a method to determine the wheel setting error is proposed. Subsequently, grinding tests are performed with the wheels aligned accurately. Using a newly proposed partial error compensation method with an appropriate compensation factor, a form error of 3.4 μm peak-to-valley (PV) for a Φ400 mm elliptical K9 glass surface is achieved.
Abrasive flow polishing media consist of micrometer-sized rigid abrasives dispersed in a viscoelastic polymer matrix. In this work, we investigate how abrasive particle size and the particle size-gap ratio (D/H) govern rheological behavior and polishing performance for quartz glass. Steady shear and normal-stress measurements (0.1–100 s−1) show that the first normal stress difference N1 increases as particle size decreases; at 100 s−1, N1 rises from 4672.9 (D: 28 μm) to 17 098 Pa (D: 1.5 μm). To link rheology with material removal, it couples a particle-size-dependent viscosity model with a White–Metzner viscoelastic formulation and introduces an N1-based correction to the effective normal load in the removal function. The model identifies two distinct flow regimes governed by D/H: a free-flow regime (D/H < 0.046) and a strongly confined regime (D/H > 0.058), in which jamming/quasi-rigid behavior alters the stress field. In the free-flow regime, the predicted removal agrees with experiments within ∼9.3% error. Based on the combined requirements of low roughness and adequate removal rate, an optimal parameter window of approximately D ∼ 5 um with H ∼ 150 um is recommended, yielding Ra ∼ 3–6 nm on quartz glass surfaces.
High sensitivity, high natural frequency, and high overload capability are desired for accelerometers used in industrial applications, but simultaneously enhancing all is challenging. Here, via designing novel heavily-doped fillet structures, we prove the sensitivity, resonant frequency, and overload capability can be simultaneously enhanced. The enhancements are attributed to regulations of stress concentration and effective sensing regions by the heavily-doped fillets. The sensors with and without fillets are designed, fabricated, packaged, and tested. The results show a sensitivity of 0.31 ± 0.02 mV/g at 5 V, a natural frequency of 37.87 ± 2.09 kHz, and an overload of 10040.17 ± 531.76 g for sensors with 10-$\mu $ m fillets, which are superior to 0.27 ± 0.01 mV/g at 5 V, 34.13 ± 0.90 kHz, and 7368.55 ± 843.92 g for those no-fillet counterparts. In addition, the developed sensor further exhibited feasibility in air-bearing vibration monitoring. The proposed design is envisioned to give insights into the novel designs of high-performance stress-based sensors, including accelerometers, pressure sensors, and strain gauges.
Subsurface damage of fused silica optics is one of the major factors restricting the performance of optical systems. The densification-affected deformation and fracture in fused silica under a sliding contact are investigated in this study, via three-dimensional finite element analysis (FEA). The finite element models of scratching with 70.3° conical and Berkovich indenters are established. A refined elliptical constitutive model is used to consider the influence of densification. The finite element models are experimentally verified by elastic recovery, and theoretically verified by hardness ratio. Results of densification and plastic deformation distributions indicate that the accuracy of existent sliding stress field models may be improved if the spherical/cylindrical yield region is replaced by an ellipsoid/cylindroid, and the embedding of the yield region is considered. The initiation sequence, and the locations and stages of radial, median, and lateral cracks are discussed by analyzing the predicted sliding stress fields. Median and radial cracks along the sliding direction tend to be the first cracks that emerge in the sliding and unloading stages, respectively. They coalesce to form a big median–radial crack that penetrates through the entire yield region. The fracture behavior of fused silica revealed in this study is essential in the low-damage machining of fused silica optics.
Reliable fringe-order determination with a minimal number of projected patterns is essential for dynamic fringe projection profilometry (FPP), especially when measuring objects containing discontinuities and abrupt geometric variations. We present a phase-interval differential spatial-coding framework for absolute-phase retrieval using a 3 + 1 acquisition scheme. Three-step phase shifting retrieves the wrapped phase and estimates the background and modulation terms, which are further reused to demodulate the phase of a single high-frequency coded pattern. Codewords are constructed by phase-staircase quantization and decoded within two complementary wrapped-phase intervals, (−π,0] and (0,π]: the right-interval code provides the low-order component, while the left–right difference encodes the high-order component, thereby expanding the code space within one fringe period. This differential design enables reliable fringe-order recovery even when one subregion is locally missing due to occlusion or depth discontinuities. Overlap-guided connected-domain fusion and iterative constraint propagation are further introduced to correct locally isolated segments. Experiments on edge-rich targets demonstrate accurate absolute-phase reconstruction using only four projected patterns and improved reliability over representative two-frequency, phase-coding, and Gray-code baselines under identical settings.
This research tackles the intricate machining properties of cylindrical aspheric surfaces with a versatile adaption approach utilizing a robotic arm and a compact tool head, incorporating trajectory optimization. A three-step integrated error compensation framework was established as the core to address spatial inaccuracies in robotic systems, incorporating coordinate measuring machine (CMM)-based cylindrical generatrix offset correction, laser tracker-assisted progressive coordinate calibration, and contour profiler-driven feedback compensation. Complemented by a curvature-driven trajectory design, the method ensures uniform polishing coverage for non-uniform curvature surfaces. Experimental validation on S-TiH53 glass cylindrical aspheric components demonstrated a surface profile accuracy of peak-to-valley (PV) value ≤ 2 μm, meeting stringent requirements for high-power laser applications. This systematic approach enhances both efficiency and accuracy in robotic polishing, offering a viable solution for high-end optical manufacturing.