Symmetry is presented in the frame structure, modeling, and disturbance analysis of the three-axis inertially stabilized platform (ISP), which affects the control performance of the ISP. To realize high-performance control for the ISP, a nonlinear dynamic model based on the geographic coordinates and a compound control method based on the adaptive extended state observer (ESO) and adaptive back-stepping integral sliding mode control (SMC) are proposed. The nonlinear dynamic model based on geographic coordinates could avoid the degradation of measurement and control performance due to complex coordinate transformations. An adaptive ESO (AESO) has been developed to estimate the unknown disturbances of ISP. With the information from the ISP system, the adaptive bandwidth of AESO can deal with the peaking phenomenon without introducing excessive noise. Furthermore, based on the integral sliding mode, the adaptation laws of parameter uncertainty and disturbance estimation compensation have been developed for the back-stepping integral SMC method, which can reduce the estimation burden and improve the disturbance estimation accuracy of AESO. The asymptotic stability of the compound control method has been proven by the Lyapunov stability theory. Through a series of simulations and experiments, the effectiveness of the compound method is validated.
To realize high-performance control for the inertially stabilized platform, a compound control method based on the adaptive linear extended state observer and global fast terminal sliding mode control is proposed. For estimating the unknown disturbances of inertially stabilized platform, an adaptive linear extended state observer was developed. With the full use of the information of attitude and angular velocity, the adaptive bandwidth of an adaptive linear extended state observer can deal with the peaking phenomenon without introducing excessive noise. Furthermore, the adaptation law based on the global fast terminal sliding mode control for disturbance estimation compensation was developed, which can improve the disturbance estimation accuracy of the adaptive linear extended state observer, and the higher order terminal function in global fast terminal sliding mode control was replaced by the lumped disturbance estimation of adaptive linear extended state observer, which can improve the anti-interference ability of inertially stabilized platform, reduce the chattering problem, and improve the control performance. The asymptotic stability of the proposed control method has been proven by the Lyapunov stability theory. The effectiveness of the proposed method was validated by a series of simulations and experiments.
The paper proposes a nonlinear full-state feedback controller to overcome model uncertainty as well as external disturbances in electrohydraulic servo systems. The controller combines sliding mode control and a finite time disturbance observer through the backstepping method to achieve effective control performance. First, the finite time observer estimates the full state signal, including the position signal, velocity signal, acceleration signal, and the lumped disturbance in the electro-hydraulic systems. Furthermore, a composite reaching law using a novel hyperbolic tangent function, along with sliding mode control, adaptively adjusts the convergence rate of the equilibrium point while effectively improving the chattering problem. Using Lyapunov theory, it is proven that the proposed controller achieves asymptotic convergence, while the observer ensures finite-time convergence. Finally, in order to prove the performance of the designed control strategy, simulation results are presented.
26 January 2026 in IEEE Transactions on Instrumentation and Measurement
Due to their significant potential for ultra-high sensitivity, in-situ magnetometers have emerged as an essential part of Xe isotope-based nuclear magnetic resonance (NMR) gyros for inertial measurements. However, installation errors can deviate beam propagation from ideal paths, thereby degrading the measurement accuracy. In this work, a comprehensive response model is established to reveal alignment effects on insitu magnetometers and NMR gyros. To address this, a dual-beam alignment method is proposed to align pump and probe beams sequentially. The core advancement lies in the exploitation of the direct correlation between beam’s misalignment and the phase error, which is obtained by canceling the reference-frequency signal component via a closed-loop structure. This ensures continuous and rapid alignment. For verification, a series of alignment experiments is conducted in two stages: pump beam alignment and probe beam alignment. The results demonstrate that after dual-beam alignment, the sensitivity of the in-situ magnetometer can be improved by approximately 35% relative to the existence of small misalignment angles. Correspondingly, the white phase noise of the NMR gyro can be suppressed by about 26%, enhancing its dynamic response capability.