The operating parameters of photolytic and photocatalytic reaction processes directly affect the efficiency in the degradation of compounds. In particular, pH is a variable that needs to be considered as it exerts great influence on adsorption, absorption, solubility, among others. This study describes the application of the photolytic process, at different pHs, in the degradation of different pharmaceutical compounds. Photolytic reactions were performed with the following contaminants: acetylsalicylic acid (ASA), ibuprofen (IBP) and paracetamol (PAR). In addition, a comparison was performed using the commercial catalyst P25. The results indicated a great influence of the pH in the kinetic constant of the photodegradation and in the UV absorbance of the species. In particular, the degradation of ASA and PAR were favored with the reduction of pH, while the degradation of IBU and SA were favored by increasing. Also, the chromatograms indicated that pH may affect the by-products formed. In comparison, the photocatalysis process in the presence of P25 proved to be much more effective, but it was not possible to achieve complete mineralization of the compounds.
This paper presents the results of investigating the dynamics of an economic system with chaotic behavior and a suboptimal control proposal to suppress the chaotic behavior. Numerical results using phase portraits, bifurcation diagrams, Lyapunov exponents, and 0-1 testing confirmed chaotic and hyperchaotic behavior. The results also proved the effectiveness of the control, showing errors below 1%, even in cases where the control design is subject to parametric errors. Additionally, an investigation of the system in fractional order is included, demonstrating that the system has periodic, constant, or chaotic behavior for specific values of the order of the derivative.
In this paper, a mathematical model was developed to describe the dynamic behavior of a bioreactor in which a fermentation process takes place. The analysis took into account the bioreactor temperature controlled by the refrigerant fluid flow through the reactor jacket. An optimal LQR control acting in the water flow through a jacket was used in order to maintain the reactor temperature during the process. For the control design, a reduced-order model of the system was considered. Given the heat transfer asymmetry observed in reactors, a model considering the fractional order heat exchange between the reactor and the jacket using the Riemann–Liouville differential operators was proposed. The numerical simulation demonstrated that the proposed control was efficient in maintaining the temperature at the desired levels and was robust for disturbances in the inlet temperature reactor. Additionally, the proposed control proved to be easy to apply in real life, bypassing the singularity problem and the difficulty of initial conditions for real applications that can be observed when considering Riemann–Liouville differential operators.
Growing demand for renewables and sustainable energy production contributes to a growing interest in producing high quality biomethane from biogas. Despite having methane (CH4) as its main component, biogas may also present other noncombustible substances in its composition, i.e., carbon dioxide (CO2), nitrogen (N2) and hydrogen sulfide (H2S). Contaminant gases, such as CO2 and H2S, are impurities known for being the main causes for the decrease of biogas calorific value and corrosion, wear of pipes, and engines, among others. Thus, it is necessary to remove these compounds from the biogas before it can be used in applications such as electricity production, thermal purposes, and replacement of conventional fossil fuels in vehicles, as well as injection into natural gas distribution networks. In this context, the present work aimed to present a systematic review of the literature using the multicriteria Methodi Ordinatio methodology and to describe processes and materials for H2S removal. The discussion indicated new materials used, as well as the advantages and disadvantages observed and the limitations in industrial implementation.
7 July 2023 in Journal of Vibration Engineering & Technologies
TiO2-based semiconductors are formidable photocatalysts for redox reaction applications. Although N-doped TiO2-Nb2O5 catalysts have already been explored in the literature, studies on their antioxidant activity are scarce, and systematic investigations on the effects of synthesis parameters over a wide range of %Nb and NH4OH concentrations are limited. In addition, the relationship between optimal pH and %Nb has not yet been adequately explored. In the present work, the sol–gel synthesis of N-doped TiO2-Nb2O5 catalysts was optimized using a design of experiments approach focused on photocatalysis, adsorption, and antioxidant applications. The samples were characterized by TGA, SEM/EDS, XRD, PZC tests, photoacoustic spectroscopy, and N2-adsorption/desorption experiments. The salicylic acid (SA) degradation tests and DPPH radical scavenging assays demonstrated the superior photocatalytic activity (up to 72.9% SA degradation in 30 min, pH 5) and antioxidant capacity (IC50 = 88.9 μg mL−1) of pure TiO2 compared to the N-doped TiO2-Nb2O5 catalysts. The photocatalytic activity, however, proved to be intensely dependent on the pH and %Nb interaction, and at pH 3, the 25Nb-1N-400 catalyst promoted more significant SA degradation (59.9%) compared to pure TiO2 (42.8%). In the methylene blue (MB) adsorption tests, the catalysts N-doped TiO2-Nb2O5 showed removals at least seven times greater than TiO2 catalysts without Nb.