Muhammad Nur YUNIARTO

Dr. Muhammad Nur YUNIARTO

orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 May 2022 in IEEE Access
Verified
Journal Article
Open access
MYMuhammad Nur YUNIARTO
Muhammad Nur YUNIARTO
SWStefanus Eko Wiratno
Stefanus Eko Wiratno
YNYoga Uta Nugrah
Yoga Uta Nugrah
ISIndra Sidharta
Indra Sidharta
ANAchmad Nasruddin
Achmad Nasruddin
Indonesia has the third-largest motorcycle population in the world. These motorcycles have been known as a source of air pollution. Therefore, shifting the motorcycle to electric-driven based technology is inevitable. However, it is quite challenging as the residents prefer higher performance (in terms of power and speed) of the electric model which is unavailable in the market. Unfortunately, the demand for higher performance models creates other problems, such as the requirement for a bigger battery. This is because there is a range of anxiety phenomena in-vehicle usage. However, the capability to accurately estimate the electric motorcycle’s range does not exist. Therefore, this paper focuses on how to develop an electric scooter model to simulate its performances, especially its range estimation. The modeling approach was the use of an electric scooter longitudinal model developed in MATLAB/Simulink environment. Based on the dimensions and targeted performance, the developed model was simulated to determine its power and energy requirements. It is then validated using an experimental test on a dynamometer and on-road conditions. Based on the experimental data analysis, it can be concluded the developed model is valid and can be used as a basis for the next development of any electric motorcycle.

1 January 2006 in International Journal of Production Research
Verified
Journal Article
Closed access
MYMuhammad Nur YUNIARTO
Muhammad Nur YUNIARTO
Ashraf LabibAshraf Labib
Ashraf Labib
In this paper, a framework of integrating preventive maintenance (PM) and manufacturing control system is proposed. Fuzzy-logic control is used to enable an intelligent approach of integrating PM and a manufacturing control system. This will contribute to the novel development of an integrated and intelligent framework in those two fields that are sometimes difficult to achieve. This idea is based on combining work on an intelligent real-time controller for a failure-prone manufacturing system using a fuzzy-logic approach (Yuniarto, M.N. and Labib, A.W., Optimal control system of an unreliable machine using fuzzy logic control: from design to implementation. Int. J. Prod. Res. (in press a); Yuniarto, M.N. and Labib, A.W., Intelligent real time control of disturbances in manufacturing systems. Integr. Manuf. Syst.: Int. J. Manuf. Technol. Manage. (in press b) and the work on PM proposed by Labib et al. (Labib, A.W., Williams, G.B. and O’Connor, R.F., An intelligent maintenance model (system): an application of analytic hierarchy process and a fuzzy logic rule-based controller. J. Oper. Res. Soc., 1998, 49, 745–757)). The aim of the research is to control a failure-prone manufacturing system and at the same time propose which PM method is applicable to a specific failure-prone manufacturing system. The mean time to repair and mean time between failures of the system are used as integrator agents, by using them to couple the two areas to be integrated (i.e. a maintenance system and manufacturing system).

4 March 2022 in IEEE Electrification Magazine
Verified
Journal Article
Closed access
MYMuhammad Nur YUNIARTO
Muhammad Nur YUNIARTO
ISIndra Sidharta
Indra Sidharta
SWStefanus Eko Wiratno
Stefanus Eko Wiratno
YNYoga Uta Nugrah
Yoga Uta Nugrah
DADimas Anton Asfani
Dimas Anton Asfani
The R&D lead time of a motorcycle from scratch takes roughly five to seven years. This time frame needs to be significantly reduced to develop and produce an electric motorcycle in less than a year. The purpose of this article is to report the designing, testing, and mass production of GESITS, the first electric motorcycle developed in Indonesia. This was a significant development in Indonesian industries because motorcycles before GESISTS were developed by their principal engineers in Japan, India, or China. Due to the short time available for R&D, traditional methods employed by existing automotive industries were not applicable. They operated following the requirements from their motorcycle parent companies, which had gigantic markets, capabilities, and finance. Furthermore, the electric motorcycle industry was not yet ready because the R&D model seemed to be a push rather than pull market production employed by the existing industries. Therefore, a novel methodology and approaches for R&D and production are required. In terms of technology, business model, and company, this motorcycle was novel, meaning it was logical to implement the innovation-based approach to research, develop, and produce the GESITS. Lean start-up methodology governs the R&D process and was used to develop GESITS and its business model in less than two years. Subsequently, GESITS has been mass produced and sold in Indonesia and abroad with sales significantly increasing annually. Therefore, this article shows the successful implementation of the innovation-based concept in new industries—electrical motorcycles.

Verified
Journal Article
Open access
PDF file
MYMuhammad Nur YUNIARTO
Muhammad Nur YUNIARTO
ISIndra Sidharta
Indra Sidharta
YYYohanes Yohanes
Yohanes Yohanes
YNYoga Uta Nugrah
Yoga Uta Nugrah
This paper discusses the process of developing a novel and robust algorithm for an interior permanent magnet synchronous motor controller. This is necessary for the simplification of the setting of control parameters and maintaining the proper operation of the motor. A 3D torque lookup table was used in which two inputs were considered, i.e., accelerator movements and the motor rotational speed. These two inputs allowed the lookup table to generate a specified torque at any motor rotation, which was then fed-forward to the field-oriented control and space vector pulse width modulation algorithm. Modeling, simulation, and experimental tests were performed to design and validate the proposed controller. The experimental validation shows that the proposed controller worked as intended. This was indicated by its ability to control the motor to obtain a 7% higher torque output than in the simulation in the constant torque region. In the field-weakening region, the controller could make the motor reach a maximum speed of 5500 RPM. There was only an 8% difference compared to the simulation (6500 RPM). In terms of maximum power generated, the controller was able to match the simulation output with only a 5% difference.

1 March 2021 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
MAM F Akhsani
M F Akhsani
MYMuhammad Nur YUNIARTO
Muhammad Nur YUNIARTO
Operation and Maintenance (O&M) held a significant factor in the power generation business. Despite the costs only about 15% of all life cycle costs, this figure may fluctuate to ± 20% due to spare part costs, equipment’s economic lifetime, and personnel cost. This paper describes a reliability-based Decision Support System (DSS) development to determine an optimum O&M strategy for coal-fired power plants. The methodology was developed from System Dynamics modeling, with the objective function to maximize Net Present Value (NPV) and maintain availability exceeding its goal. DSS allows users to study the power plant cost characteristics within their life cycle, including its sensitivity to NPV. The model was tested to a 600 MW coal-fired power plant in Indonesia. Mean Absolute Percentage Error (MAPE) applied as model acceptance criteria. From this study, coal price was the most sensitive variable to NPV (62.36%), followed by dispatcher demand (53.31%), and overhaul duration (1.5%). From 4 simulated scenarios, it was concluded that O&M outsourcing as asset operator authority was a proper choice that provides the highest NPV. Nevertheless, some risks related to employee competence and bureaucratic obstacles should be controlled.