Several experiments are conducted to investigate the seismic behavior of composite shear walls because of their advantages compared to traditional reinforced concrete (RC) walls. However, the numerical studies are limited due to the complexities for the steel and concrete behaviors and their interaction. This paper presents a numerical study of composite shear walls with stiffened steel plates and infilled concrete (CWSC) using ABAQUS. The mechanical mechanisms of the web plate and concrete are studied. FE models are used to conduct parametric analysis to study the law of parameters on the seismic behaviour. The finite element (FE) model shows good agreement with the test results, including the hysteresis curves, failure phenomenon, ultimate strength, initial stiffness, and ductility. The web plate and concrete are the main components to resist lateral force. The web plate is found to contribute between 55% and 85% of the lateral force of wall. The corner of web plate mainly resists the vertical force, and the rest of web plate resists shear force. The concrete is separated into several columns by stiffened plates, each of which is independent and resisted vertical force. The wall thickness, steel ratio, and shear span ratio have the greatest influence on ultimate bearing capacity and elastic stiffness. The shear span ratio and axial compression ratio have the greatest influence on ductility. The test and analytical results are used to propose formulas to evaluate the ultimate strength capacity and stiffness of the composite shear wall under cyclic loading. The formulas could well predict the ultimate strength capacity reported in the literature.
In the curling sport, the coefficient of friction between the curling stone and pebbled ice is crucial to predict the motion trajectory. However, the theoretical and experimental investigations on stone–ice friction are limited, mainly due to the limitations of the field measurement techniques and the inadequacy of the experimental data from professional curling rinks. In this paper, on-site measurement of the stone–ice friction coefficient in a prefabricated ice rink for the Beijing Winter Olympics curling event was carried out based on computer vision technology. Firstly, a procedure to determine the location of the curling stone was proposed using YOLO-V3 (You Only Look Once, Version 3) deep neural networks and the CSRT Object tracking algorithm. Video data was recorded during the curling stone throwing experiments, and the friction coefficient was extracted. Furthermore, the influence of the sliding velocity on the friction coefficient was discussed. Comparison with published experimental data and models and verification of the obtained results, using a sensor-based method, were conducted. Results show that the coefficient of friction (ranging from 0.006 to 0.016) decreased with increasing sliding velocity, due to the presence of a liquid-like layer. Our obtained results were consistent with the literature data and the friction model of Lozowski. In addition, the experimental results of the computer vision technique method and the accelerometer sensor method showed remarkable agreement, supporting the accuracy and reliability of our proposed measurement procedure based on deep learning.
The construction of a prefabricated ice rink has recently attracted considerable interest owing to its detachability, short building period, and high cooling efficiency, among other benefits. Characterizing the compressive properties of an artificial ice sheet is crucial in the design, operation, and maintenance stages of the rink. Several uniaxial compressive tests were conducted in the present work to better understand the mechanical behavior of artificial ice in winter sports rinks. The artificial ice was produced using homemade equipment to simulate the real ice-making conditions in the rink. Comprehensive conditions such as strain rate, ice temperature, ice-making method, water quality, air temperature and humidity were considered in the experiments. The obtained results show that the compressive behavior of artificial ice is considerably affected by the strain rate and ice temperature, and slightly affected by the ice-making method and water quality, whereas the effects of air temperature and humidity are inconclusive. The identified range of strain rate for ductile-brittle transition was within 8.3 × 10−5 s–1 and 8.3 × 10−4 s−1, in which the strength reaches a maximum value at 1.7 × 10–4 s−1. The influencing factors on the compressive strength and effective modulus were analyzed based on the experimental observations, and fitting functions were established to describe the relationships. The results of this study will hopefully provide a reference for the design and optimization of ice rinks, particularly for prefabricated rinks.
During curling sports, the movement of the stone is affected by the quality of the ice. Therefore, the delivery team led by the ice maker hopes that the quality of the ice surface will be stable and that the athletes will always ‘read the ice’ and pay attention to the small changes in the ice surface. This phenomenon is the charm of curling. Many friction models have been proposed to describe the regularity of the curling motion. In the curling competitions of the 2022 Beijing Winter Olympic Games, the 2021 World Wheelchair Curling Championships, and the warm-up competition before, the research team installed a video image capture system in the arena to capture and record the data of the curling motion by using the depth neural network and object tracking algorithm. Further motion data research verifies the relationship between the friction coefficient and the speed. The quality control parameter of ice rink α is proposed, which is related to the influencing factors of the ice surface temperature, the ice hardness, the size of the pebble point, and the width of the curling friction band. The quality of the curling ice rink can be evaluated accurately and comprehensively by using parameter α. Based on the relationship between the friction coefficient and the speed, a physical model of horizontal sliding of the curling stone is established, which agrees well with the results of data obtained from video acquisition. Therefore, the movement distance along the rink can be accurately predicted. This paper analyzes the relationship between the long-time (the time it takes for the curling stone to travel between the two hog lines) and the stop position and that between the long-time and the split-time (the time it takes for the curling stone to travel from the back line to the hog line). Based on this result, a ruler can be established to assist athletes in estimating the sliding distance of the stone before curling throwing. This research also studies the relationship between three factors (the sliding speed in the x-direction, the angular speed, and a tiny lateral deflection speed in the y-direction) and the deviation of the stone. At the same time, there are also some interesting phenomena of the lateral deflection of the stone, such as the relationship between the lateral deflection angle tanθ and the initial lateral speed. As a result, the prediction of the curling stone’s exact final location can be realized. In summary, this article proposes an indicator for evaluating the quality of ice rinks and a physical model of curling based on the curling friction model, which is validated by data obtained from a video capture system of the 2022 Beijing Winter Olympics. The results described above have been applied in the post-match operation of the National Aquatics Center to guide the production of Olympic-grade ice surfaces and to guide athletes to “read ice” accurately during training.