Zhuang Liu

Prof. Dr. Zhuang Liu

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 November 2012 in Packaging Technology and Science
Verified
Journal Article
Closed access
PDF file
ZLZhuang Liu
Zhuang Liu
ZSZhihui Sun
Zhihui Sun
XMXinxin Ma
Xinxin Ma
CYChun Li Yang
Chun Li Yang

28 June 2023 in Biomimetics
Verified
Journal Article
Open access
PDF file
CLCY L
CY L
YTYe Tian
Ye Tian
WXWei Xu
Wei Xu
JZjiahang Zhang
jiahang Zhang
ZSZhihui Sun
Zhihui Sun
ZLZhuang Liu
Zhuang Liu
At present, the packing method of “plastic bag–buffer packing–packing paper box” is adopted for bearing packaging. However, the common packing method has a poor packing effect and poor versatility. In this study, a new biomimetic cobweb cushion is proposed to solve the problem of insufficient cushioning capacity of high-precision bearing cushion packaging pads. First, according to the nature of cobweb form, the cobweb cushion structure configuration is determined. Next, based on the structure of the cushion and the relationship between the parameters of radial thread and spiral thread, a mechanical and target optimization model is established. The stress nephogram of bearing and the cobweb cushion are analyzed under three drop heights of 381, 610, and 700 mm, in the finite element simulation software to ensure that the maximum bearings stress is not beyond the material yield strength. Via the 3D printing technology, a cobweb cushion shell cast is made. Drop tests of the bearing were performed, and the results were verified with the finite element simulation analysis. This research can provide technical support for the protection of high-precision bearings from accidental drops during transportation.


16 June 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
J张jia'hang 张
jia'hang 张
HLHai Liu
Hai Liu
ZLZhuang Liu
Zhuang Liu
To improve the antifouling and self-cleaning performance of 3003 aluminum alloy, a green fluorine-free superhydrophobic surface was fabricated by combining nanosecond laser processing with subsequent heat treatment. The effects of laser processing parameters, including scanning speed, laser power, pulse frequency, and scanning interval, on surface wettability were systematically investigated. The results showed that optimized processing conditions (2700 mm/s, 6 W, 35 kHz, and 20 μm) enabled the formation of hierarchical micro-/nano-structures, resulting in a maximum water contact angle of 154.32°. SEM and EDS analyses suggested that the enhanced wettability originated from the synergistic effect of hierarchical rough structures and heat-treatment-induced surface chemical modification, which promoted the formation of a stable Cassie–Baxter state. The fabricated surface exhibited excellent self-cleaning performance, as water droplets effectively removed SiO₂ contaminants by rolling behavior. In addition, the surface maintained high hydrophobicity after repeated water jet impact and tape-peeling tests, indicating good resistance to dynamic flow and mechanical damage. This study provides a simple, environmentally friendly, and effective strategy for fabricating durable superhydrophobic aluminum alloy surfaces for antifouling and protective applications.

17 January 2018
Verified
Book Chapter
Closed access
PDF file
ZLZhuang Liu
Zhuang Liu
LZLin Zhu
Lin Zhu
HYHanlin Yang
Hanlin Yang
JCJiang Chang
Jiang Chang
WCWenping Cao
Wenping Cao

17 August 2026 in Coatings
Verified
Journal Article
Open access
PDF file
J张jia'hang 张
jia'hang 张
HLHai Liu
Hai Liu
ZLZhuang Liu
Zhuang Liu
To improve the antifouling and self-cleaning performance of 3003 aluminum alloy, a fluorine-free water-repellent surface was fabricated by combining nanosecond laser texturing with subsequent heat treatment. The effects of scanning speed, laser power, pulse frequency, and scanning interval on surface wettability were systematically investigated. Under the optimal conditions of 2700 mm/s, 6 W, 35 kHz, and 20 μm, the surface achieved a maximum static water contact angle of 154.3 ± 0.8°. Surface characterization showed that laser processing generated hierarchical micro-/nano-scale structures, while heat treatment promoted surface chemical evolution associated with enhanced hydrophobicity. The highly water-repellent behavior resulted from the synergistic effect of hierarchical roughness and heat-treatment-induced surface chemical changes. The fabricated surface exhibited effective self-cleaning performance, achieving a SiO2 removal efficiency of 98.8% under the specified test conditions. In addition, relatively high water repellency was retained after repeated water-impact and tape-peeling tests. These results demonstrate that nanosecond laser texturing combined with heat treatment provides a simple and environmentally friendly strategy for fabricating water-repellent AA3003 surfaces for antifouling and surface-protection applications.