Agung Mataram

Dr. Agung Mataram


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 August 2022 in Membranes
Verified
Journal Article
Open access
PDF file
MNMuhammad Syahrul Nasution
Muhammad Syahrul Nasution
AMAgung Mataram
Agung Mataram
IYIrsyadi Yani
Irsyadi Yani
GSGurruh Dwi Septano
Gurruh Dwi Septano
Polymeric membranes have good properties for filtering water. In this paper, a membrane made from polyvinylidene fluoride (PVDF) polymer with 15 wt%, 17.5 wt%, and 20 wt% polymer content, with the addition of 1 wt% of tin dioxide with electric field treatment, is presented. The electric field used was DC 15,000 V. The membrane was tested to determine its characteristics and properties. The physical properties were examined with a scanning electron microscope, and the mechanical properties of the membrane were tested by tensile testing. The maximum tensile stress was obtained at 0.746 MPa, and the minimum tensile stress was obtained at 0.487 MPa. Microscopic examination of the membrane’s surface identified the shape, the structure of the fibers formed, and the amount of agglomeration. The flow rate, membrane flux, and normalized water permeability (NWP) were tested, using the water treatment performance test to measure the membrane’s filtering ability.

9 March 2017 in MATEC Web of Conferences
Verified
Journal Article
Open access
PDF file
AMAgung Mataram
Agung Mataram
SNSyahrul Nasution
Syahrul Nasution
MWMazari Legi Wijaya
Mazari Legi Wijaya
GSGurruh Dwi Septano
Gurruh Dwi Septano
MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry

1 April 2019 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
IAIbnu Asrafi
Ibnu Asrafi
MYM. Yerizam
M. Yerizam
SESairul Effendi
Sairul Effendi
AMAgung Mataram
Agung Mataram
Micro hydro electric power plant (MEPP) prototype is a small scale power plant (less than 100 kW) that utilizes height difference and water discharge per second. Prototype consists of a water pump, where capacity of 41 liter per minute serving as turbine driving force channelled through a nozzle, with a 40 liter water reservoir, and the water flow rate controller is a gate valve. The results show that at blade counts of 4,8,12, and 16, and with water discharge at 40 l/s, 35 l/s, 30l/s, and 25 l/s, with nozzle shooting angle of 50 °, the turbine rotational velocities are 310 rpm, 639 rpm, 655.5 rpm, and 691.3 rpm respectively. Furthermore, at water discharge of 35 l/s, the velocities are 293.3 rpm, 375,3 rpm, 412.7 rpm, 446.2 rpm, and at water discharge of 30 l/s, they are 240.3 Rpm, 395.0 rpm, 430.5 rpm, 445.2 Rpm. Moreover, at water discharge 25 of l/s, the speeds are 285.5 rpm, 330.5 rpm, 426.0 rpm, 431.1 rpm. It is concluded that the higher the water discharge rate, the greater the number of rotation, and it is also concluded that shooting angle has a significant effects on pelton turbine rotation and power.

31 May 2024 in International Journal of Mechanics, Energy Engineering and Applied Science (IJMEAS)
Verified
Journal Article
Open access
PDF file
PAPraja Dilla Atos
Praja Dilla Atos
RRRomli Romli
Romli Romli
NMNanda Yusril Mahendra
Nanda Yusril Mahendra
AMAgung Mataram
Agung Mataram
AMAmrifan Saladin Mohruni
Amrifan Saladin Mohruni
This research focuses on the finite element analysis for the design of reinforcement towers under dynamic load conditions. The reinforcement tower is a crucial part of the retrieval system that supports the system’s optimal function. This study identifies critical areas and plans reinforcement design steps on the construction of the retrieval tower. Stress analysis helps determine reinforcement design steps based on established standards and analytical approaches. The finite element method is used to analyze the design of the retrieval tower. The model is meshed into small triangular parts to find solutions in the form of finite element analysis of reinforcement tower design under dynamic load conditions. The results of finite element computation show normal stress fluctuations and increased displacement over time, indicating material deformation. This analysis is essential for understanding material behavior and designing systems that can effectively withstand dynamic loads.

30 January 2024 in Journal of Advanced Research in Numerical Heat Transfer
Verified
Journal Article
Open access
PDF file
IAimam akbar
imam akbar
DRDewi Rawani
Dewi Rawani
HRHeriyanto Rusmaryadi
Heriyanto Rusmaryadi
MKMartin Luther King
Martin Luther King
PRPramadhony
Pramadhony
AMAgung Mataram
Agung Mataram
The improvement of performance in modern electronic devices has driven rapid advancements in the field of thermal management. Excessive heating of electronic components can lead to damage and decreased device performance. This research aimed to analyze the effect of tortuosity porous heatsink on force convection heat transfer. Computational fluid dynamics methodology was used to model airflow and the distribution of temperature, velocity, convective heat transfer coefficient, and turbulence kinetic energy (TKE) in heatsinks with varying tortuosity levels. Results show that tortuosity has a positive linear correlation with heatsink surface area and pressure drop. However, it has a negative linear correlation with surface heat transfer coefficient (SHTC). When the tortuosity increases, the surface area increases from 9298.48 mm2 to 12711.93 mm2, and the pressure drop increases from 19.587 Pa to 24.296 Pa. By contrast, the surface heat transfer coefficient decreased significantly from 41.1214 W m-2 K-1 to 30.8454 W m-2 K-1. This study also shows that heatsinks with low tortuosity have a more uniform distribution of temperature, velocity, and TKE, resulting in higher cooling efficiency. Thus, we conclude that tortuosity is an important factor in heatsink design and optimization, and a suitable level of tortuosity should be achieved

30 December 2024 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
AMAgung Mataram
Agung Mataram
AFAneka Firdaus
Aneka Firdaus
MYMuhammad Yanis
Muhammad Yanis
RDRahma Dani
Rahma Dani
SNSubriyer Nasir
Subriyer Nasir
Mohd Hafiz Dzarfan OthmanMohd Hafiz Dzarfan Othman
Mohd Hafiz Dzarfan Othman
The increasing demand for clean water, driven by population growth, urbanization, and industrial activities, has led to significant challenges in public health, the economy, and the environment. Effective water purification technologies are essential to address this issue. This study explores using polyethersulfone (PES) polymer-based membranes reinforced with titanium dioxide (TiO2) nanoparticles for antifouling applications. The membranes were fabricated using an electric field treatment method. Scanning Electron Microscopy (SEM) revealed a pore size distribution between 1,170 μm and 7,122 μm, demonstrating that this method can be adjusted to create membranes with specific filtration characteristics. Atomic Force Microscope (AFM) analysis showed surface roughness between 150 and 500 nm, indicating that the membrane's surface morphology can be customized to improve performance. Mechanical testing showed that the tensile strength of the membranes varied with the addition of TiO2: the pure PES membrane (TI0) had a tensile strength of 2.12 MPa, while the TI1 membrane (20 % PES, 1 % TiO2) exhibited a decrease to 1.84 MPa. The TI2 membrane (30 % PES, 1 % TiO2) showed an increase in tensile strength to 3.86 MPa, confirming the reinforcing effect of TiO2 on the membrane's mechanical properties. Clean Water Permeability (CWP) testing indicated flux values of 2558.9 L/m2·h·bar for TI0, 1263.1 L/m2·h·bar for TI1, and 2763.9 L/m2·h·bar for TI2, highlighting the optimal balance of mechanical strength and permeability in TI2. The PES/TiO2 composite membrane, made using an electric field method, shows promise for water filtration due to its enhanced permeability, providing an efficient solution for water treatment