This study aims to identify the effect of infill on mechanical behaviour, especially the yield stress and modulus young of polylactide materials with different unit cell structures such as gyroid, diamond, square, and re-entrant but same porosity with value of 60%. Using Computational aided design (CAD) software and analyzed using the finite element method. The results show that the square structure has the highest strength in terms of mechanical behaviour such as yield stress with a value of 27 MPa, while the gyroid is 25.5 MPa, diamond is 25.3 MPa, re-entrant is 23.3 MPa and young modulus square is 2233MPa gyroid is 2199 MPa, diamond is 2195 MPa re- entrant 2182 MPa. In this study, it was also found that the thickness struth of the unit cell and modulus young had a very strong linear correlation with R2 = 0.96 which explains that the higher the thickness value, the higher the modulus young value. The results of this study also show that although lattice structures, especially square ones, have the highest value, TPMS structures, such as gyroids and diamonds, have more stable performance because these structures have an even stress distribution, thereby reducing the risk of failure of the structure. besides that, the researchers concluded that this TPMS can be used as a solution to improve structural performance.
30 January 2024 in Journal of Advanced Research in Numerical Heat Transfer
The improvement of performance in modern electronic devices has driven rapid advancements in the field of thermal management. Excessive heating of electronic components can lead to damage and decreased device performance. This research aimed to analyze the effect of tortuosity porous heatsink on force convection heat transfer. Computational fluid dynamics methodology was used to model airflow and the distribution of temperature, velocity, convective heat transfer coefficient, and turbulence kinetic energy (TKE) in heatsinks with varying tortuosity levels. Results show that tortuosity has a positive linear correlation with heatsink surface area and pressure drop. However, it has a negative linear correlation with surface heat transfer coefficient (SHTC). When the tortuosity increases, the surface area increases from 9298.48 mm2 to 12711.93 mm2, and the pressure drop increases from 19.587 Pa to 24.296 Pa. By contrast, the surface heat transfer coefficient decreased significantly from 41.1214 W m-2 K-1 to 30.8454 W m-2 K-1. This study also shows that heatsinks with low tortuosity have a more uniform distribution of temperature, velocity, and TKE, resulting in higher cooling efficiency. Thus, we conclude that tortuosity is an important factor in heatsink design and optimization, and a suitable level of tortuosity should be achieved
This research aims to analyze the effect of tortuosity porous heatsink on natural convection heat transfer. Heatsink plays a crucial role in dissipating heat from electronic components, and optimizing heatsink design is essential for effective and efficient thermal management. In this study, heatsink structures including splitP, diamond, gyroid, and pin were created using generative design methods, and the relationship between tortuosity and heatsinks thermal performance was investigated through Computational Fluid Dynamics (CFD). The results show that an increase in tortuosity leads to a significant increase in surface area and pressure drop, with values ranging from 9298.48-12711.93 mm2 and 0.08701-0.09474 Pa, respectively. Additionally, tortuosity also exhibits a strong linear correlation with the Nusselt number, with value R2=0.88. As tortuosity increases, the Nusselt number decreases significantly from 18.04-9.90. In this research, we conclude that tortuosity is an important parameter that affects heatsink performance, and the TPMS structure we developed is a promising heatsink design candidate for thermal management devices. However, a balance needs to be sought between surface area, pressure drop, overall heat transfer, and other parameters such as pore size and interconnectivity to achieve optimal heatsink performance.
Program Making Indonesia 4.0 merupakan strategi Indonesia dalam menghadapi era Industri 4.0 yang terus mengalami perkembangan yang pesat. Industri 4.0 ini dapat menciptakan peluang tenaga kerja digital terutama dalam bidang jasa dan industri manufaktur. Pengabdian ini bertujuan untuk mensosialisasikan teknologi mesin cetak 3D berbasis additve manufacturing (AM) yang merupakan salah satu teknologi utama Industri 4.0. Kegiatan pengabdian yang dilakukan adalah memberikan pelatihan mesin cetak 3D bagi guru dan siswa SMK Satria Nusantara Betung. Pelatihan ini terdiri dari rancang bangun hingga cara pengoperasian mesin cetak 3D. Mesin cetak 3D yang disosialisasikan adalah bertipe fused deposition modeling (FDM) yang merupakan teknik mencetak 3D lapis demi lapis dimulai dari bawah ke atas oleh filamen termoplastik pemanasan dan ekstrusi. Dari pengabdian ini dapat menjadi ilmu dan dorongan bagi sekolah untuk mengimplementasikannya ke dalam sistem pembelajaran sekolah baik menjadi mata pelajaran tersendiri atau sebagai ekstrakulikuler. Kegiatan pengabdian kepada masyarakat ini merupakan salah satu program MBKM berupa kegiatan kolaborasi antara dosen dan mahasiswa. Berdasarkan hasil evaluasi yang ditelusuri melalui kuesioner yang dibagikan ke 5 guru dan 15 siswa menunjukkan 80% tertarik untuk mempelajari lebih lanjut dan menggunakan mesin cetak 3D. Mereka juga berharap untuk dapat segera mengintegrasikannya ke dalam kurikulum atau ekstrakurikuler guna menghadapi era Industri 4.0.
Penelitian ini bertujuan untuk menganalisis kinerja struktur kursi roda multi guna menggunakan metode elemen hingga (FEA) dan perhitungan analitik. Model kursi roda dibangun dan dianalisis menggunakan perangkat lunak FEA untuk mendapatkan distribusi tegangan, perpindahan, dan tegangan lentur. Hasil FEA menunjukkan nilai tegangan maksimum sebesar 415 MPa, perpindahan maksimum 46 mm, dan tegangan lentur maksimum 407 MPa, melebihi batas sifat mekanik material aluminium 6061. Hasil analitik menghasilkan nilai tegangan sebesar 57 MPa pada struktur bagian depan, sedangkan FEA menghasilkan nilai 46 MPa. Perbedaan hasil antara kedua metode ini dapat disebabkan oleh beberapa faktor, seperti asumsi yang digunakan dalam perhitungan analitik dan kompleksitas geometri model FEA. Kesimpulan yang bisa kita ambil dari penelitian tersebut bahwa desain/struktur kursi roda multi guna telah melampaui terhadap nilai-nilai sifat mekanik dari material Aluminium 6061, yang bisa menyebabkan kegagalan struktural pada komponen-komponen nya.
24 April 2023 in International Journal of Research in Vocational Studies (IJRVOCAS)
This study aims to analyze the parameters that actively affect the efficiency of gas power plants in order to optimize their performance. The method used in this study was an analytical approach based on the results of performance tests conducted in 2018, 2020, and 2022 on gas power plants in the sumatera selatan area, based on thermodynamic equations. Based on the results of the study, it is explained that there is a very significant relationship between the inlet air temperature of the compressor, the inlet fuel temperature, and the turbine exhaust temperature and active power to the efficiency of gas-fired power plants, where an increase in the inlet air temperature to the compressor will reduce the compressor efficiency, which is predicted using linear regression with an R2=0.82. An increase in the exhaust temperature and active power will significantly reduce the thermal cycle efficiency, which is predicted using linear regression with an average R2 =0.96. In addition, an increase in the fuel mass flow rate and inlet fuel temperature will increase the turbine efficiency, which is predicted using linear regression with an average R2 =0.97. Therefore, the relationships obtained in this study can be used as a reference for energy companies and governments in developing more efficient gas-fired power plants in the future