The new millennium has witnessed a pervasive shift of trend from AC to DC in the residential load sector. The shift is predominantly due to independent residential solar PV systems at rooftops and escalating electronic loads with better energy saving potential integrated with diminishing prices as well as commercial availability of DC-based appliances. Comprehensive sensitivity analysis considering the real load profile is missing in the present body of knowledge. In order to fill that gap, this paper is an attempt to include a comprehensive sensitivity analysis of the DC distribution system and its simulation-based comparison with its AC counterpart, considering the real load profile. The paper uses the Monte Carlo technique and probabilistic approach to add diversity in residential loads consumption to obtain an instantaneous load profile. Various possible scenarios such as variation of standard deviation from 5% to 20% of mean load value, PV capacity variation from 1000 W to 9000 W, and variation in power electronic converter (PEC) efficiencies are incorporated to make the system realistic as much as possible maintaining a fair comparison between both systems. The paper concludes with the baseline efficiency advantage of 2% to 3% during the day for the case of the DC distribution system as compared to the AC distribution system.

The battle of currents between AC and DC reignited as a result of the development in the field of power electronics. The efficiency of DC distribution systems is highly dependent on the efficiency of distribution converter, which calls for optimized schemes for the efficiency enhancement of distribution converters. Modular solid-state transformers (SSTs) play a vital role in DC distribution networks and renewable energy systems (RES). This paper deals with efficiency-based load distribution for solid-state transformers (SSTs) in DC distribution networks. The aim is to achieve a set of minimum inputs that are consistent with the output while considering the constraints and efficiency. As the main feature of modularity is associated with a three-stage structure of SSTs, this modular structure is optimized using ant lion optimizer (ALO) and validated by applying it to the EIA (Energy Information Agency) DC distribution network which contains SSTs. In the DC distribution grid, modular SSTs provide the promising conversion of DC power from medium voltage to lower DC range (400 V). The proposed algorithm is simulated in MATLAB and also compared with two other metaheuristic algorithms. The obtained results prove that the proposed method can significantly reduce the input requirements for producing the same output while satisfying the specified constraints.

The new millennium has witnessed a pervasive shift of trend from AC to DC in residential sector. The shift of trend is predominantly due to independent residential solar PV systems at rooftops and escalating electronic loads with better energy saving potential integrated with diminishing prices as well as commercial availability of DC based appliances. DC has ousted AC in generation, transmission, and utilization sectors with the advent of DC based generating systems (e-g solar PV), high voltage DC (HVDC) transmission and the utilization of DC based loads respectively. However, the war of currents (AC vs DC) is still ON as regards to distribution sector. Efficiency is the parameter that once wiped DC out of the power systems scenario as compared to AC-at the time of Tesla and Edison. Therefore, the same parameter is utilized to determine which is better for distribution sector under current conditions; AC or DC? A comprehensive sensitivity analysis considering real load profile is missing in the present body of knowledge. In order to fill that gap, this paper is an attempt to include comprehensive sensitivity analysis of DC distribution system and its simulation-based comparison with AC counterpart considering real load profile. The paper uses Monte Carlo technique and probabilistic approach to add diversity in residential loads consumption and in turn to obtain instantaneous load profile. The paper also presents a futuristic perspective of power electronic converter (PEC) efficiency variation on the efficiency comparison of both AC and DC distribution systems. Since the present body of knowledge generally compares AC and DC distribution based upon assumptions and limited scenarios which results in conflicting outcomes; in contrast, the discoveries of the current examination are useful to reduce the confusions and conflictions regarding which is better at distribution scale; AC or DC?

The battle of currents between AC and DC reignited as a result of the development in the field of power electronics. The efficiency of DC distribution systems is highly dependent on the efficiency of distribution converter, which calls for optimized schemes for efficiency enhancement of distribution converters. Modular solid-state transformers play a vital role in DC Distribution Networks and Renewable Energy systems (RES).This paper deals with efficiency-based load distribution for Solid State Transformers (SSTs) in DC distribution networks. Aim is to achieve a set of minimum inputs that are consistent with output while considering constraints and efficiency. As the main feature of modularity is associated with a three-stage structure of SSTs. This modular structure has been optimized using Ant Lion Optimizer (ALO) and validated by applying it EIA (Energy Information Agency) DC Distribution Network which contains SSTs. In the DC distribution grid, modular SSTs provide promising conversion of DC power from medium voltage to lower DC range (400V). The proposed algorithm is simulated in MATLAB and also compared with two other metaheuristic algorithms. The obtained results prove that the proposed method can significantly reduce input requirements for producing the same output while satisfying the specified constraints.