The electromagnetically induced transparency effect of terahertz metamaterials exhibits excellent modulation and sensing properties, and it is critical to investigate the modulation effect of the transparent window by optimizing structural parameters. In this work, a unilateral symmetrical metamaterial structure based on the cut-wire resonator and the U-shaped split ring resonator is demonstrated to achieve electromagnetically induced transparency-like (EIT-like) effect. Based on the symmetrical structure, by changing the structural parameters of the split ring, an asymmetric structure metamaterial is also studied to obtain better tuning and sensing characteristics. The parameters for controlling the transparent window of the metamaterial are investigated in both passive and active modulation modes. In addition, the metamaterial structure based on the cut-wire resonator, unilateral symmetric and asymmetric configurations are investigated for high performance refractive index sensing purposes, and it is found that the first two metamaterial structures can achieve sensitivity responses of 63.6 GHz/RIU and 84.4 GHz/RIU, respectively, while the asymmetric metamaterial is up to 102.3 GHz/RIU. The high sensitivity frequency response of the proposed metamaterial structures makes them good candidates for various chemical and biomedical sensing applications.

With the increasing sensitivity and accuracy of contemporary high-performance electronic information systems to electromagnetic energy, they are also very vulnerable to be damaged by high-energy electromagnetic fields. In this work, an all-dielectric electromagnetic field sensor is proposed based on a microring resonator structure. The sensor is designed to work at 35 GHz RF field using a lithium niobate-on-insulator (LNOI) material system. The 2.5-D variational finite difference time domain (varFDTD) and finite difference eigenmode (FDE) methods are utilized to analyze the single-mode condition, bending loss, as well as the transmission loss to achieve optimized waveguide dimensions. In order to obtain higher sensitivity, the quality factor (Q-factor) of the microring resonator is optimized to be 10⁶ with the total ring circumference of 3766.59 μm. The lithium niobate layer is adopted in z-cut direction to utilize TM mode in the proposed all-dielectric electric field sensor, and with the help of the periodically poled lithium niobate (PPLN) technology, the electro-optic (EO) tunability of the device is enhanced to 48 pm·μm/V.

Surface-enhanced Raman scattering (SERS) holds significant potential across environmental monitoring, materials science, and biomedical applications. However, challenges regarding ultra-sensitive detection and repeatability are bottlenecks for practical applications, especially in terms of detection uniformity. In this study, we utilized surface acoustic waves (SAW) in conjunction with Raman spectroscopy to actively enrich 5 μL of 50 nm gold nanoparticles (AuNPs), thereby achieving innovative SERS-active sensing. This dynamic enrichment process enables the dense and uniform aggregation of AuNPs in droplets, thereby facilitating reliable ultrasensitive detection. The SAW system was further optimized through hydrophobic surface treatment. Using 4-mercaptobenzoic acid as a probe analyte, our SAW-SERS method successfully detected concentrations as low as 10⁻⁸ mol/L. The surface acoustic waves had the capability to significantly amplify Raman signal intensity up to 100 compared to conventional drying methodologies. This SAW-induced AuNP clustering technology offers a rapid, label-free SERS sensing method characterized by exceptional sensitivity and uniformity.

In recent years, millimeter-wave communication has played a crucial role in satellite communication, 5G, and even 6G applications. The millimeter-wave electro-optic modulator is capable of receiving and processing millimeter-wave signals effectively. However, the large attenuation of millimeter waves in the air remains a primary limiting factor for their future applications. Therefore, finding a waveguide structure with a high quality factor (Q-factor) is critical for millimeter-wave electro-optic modulators. This manuscript presents the demonstration of a double ring modulator made of lithium niobate with the specific goal of modulating an RF signal at approximately 35 GHz. By optimizing the microring structure, the double ring resonator with high Q-factor is studied to obtain high sensitivity modulation of the RF signal. This manuscript employs the transfer matrix method to investigate the operational principles of the double ring structure and conducts simulations to explore the influence of structural parameters on its performance. Through a comparison with the traditional single ring structure, it is observed that the Q-factor of the double ring modulator can reach 7.05 × 10⁸, which is two orders of magnitude greater than that of the single ring structure. Meanwhile, the electro-optical tunability of the double ring modulator is 6 pm/V with a bandwidth of 2.4 pm, which only needs 0.4 V driving voltage. The high Q double ring structure proposed in this study has potential applications not only in the field of communication but also as a promising candidate for a variety of chemical and biomedical sensing applications.

Surface acoustic wave (SAW)-based acoustofluidics has shown great potential for manipulating micro- and nanoparticles, enabling applications such as acoustic centrifugation and particle patterning. However, conventional SAW devices fabricated through photolithography and metal deposition suffer from long processing times and lack structural tunability after fabrication. In this study, a functionally tunable acoustofluidic device based on a flexible printed circuit board (FPCB) is proposed. By mechanically clamping interdigital electrodes (IDEs) on the FPCB to a piezoelectric substrate and incorporating an impedance-matching network, efficient SAW excitation is achieved. The device enables rapid enrichment of polystyrene (PS) particles ranging from 500 nm to 5 μm. Moreover, controlled patterning of 10 μm particles is realized using a magnetically attached rotating fixture, which adjusts the acoustic wave propagation direction on the substrate to excite different acoustic modes. This modular and reconfigurable FPCB-SAW device offers an adaptable platform for rapid functional validation of SAW systems and facilitates broader applications of acoustofluidic technology.