Hydrogen energy represents a crucial pathway towards achieving carbon neutrality and is a pivotal facet of future strategic emerging industries. The safe and efficient transportation of hydrogen is a key link in the entire chain development of the hydrogen energy industry’s “production, storage, and transportation”. Mixing hydrogen into natural gas pipelines for transportation is the potential best way to achieve large-scale, long-distance, safe, and efficient hydrogen transportation. Welds are identified as the vulnerable points in natural gas pipelines, and compatibility between hydrogen-doped natural gas and existing pipeline welds is a critical technical challenge that affects the global-scale transportation of hydrogen energy. Therefore, this article systematically discusses the construction and weld characteristics of hydrogen-doped natural gas pipelines, the research status of hydrogen damage mechanism, and mechanical property strengthening methods of hydrogen-doped natural gas pipeline welds, and points out the future development direction of hydrogen damage mechanism research in hydrogen-doped natural gas pipeline welds. The research results show that: ① Currently, there is a need for comprehensive research on the degradation of mechanical properties in welds made from typical pipe materials on a global scale. It is imperative to systematically elucidate the mechanism of mechanical property degradation due to conventional and hydrogen-induced damage in welds of high-pressure hydrogen-doped natural gas pipelines worldwide. ② The deterioration of mechanical properties in welds of hydrogen-doped natural gas pipelines is influenced by various components, including hydrogen, carbon dioxide, and nitrogen. It is necessary to reveal the mechanism of mechanical property deterioration of pipeline welds under the joint participation of multiple damage mechanisms under multi-component gas conditions. ③ Establishing a fundamental database of mechanical properties for typical pipeline steel materials under hydrogen-doped natural gas conditions globally is imperative, to form a method for strengthening the mechanical properties of typical high-pressure hydrogen-doped natural gas pipeline welds. ④ It is essential to promptly develop relevant standards for hydrogen blending transportation, welding technology, as well as weld evaluation, testing, and repair procedures for natural gas pipelines.

The high-temperature reservoir (105 °C) in the Liubei block of Jidong Oilfield, with severe longitudinal heterogeneity, has entered a high water-cut stage. After a preliminary profile control, the water management of the oilfield still faces serious water channeling problems. To strengthen water management, N₂ foam flooding combined with gel plugging for enhanced oil recovery was studied. In this work, considering a high-temperature reservoir of 105 °C, a composite foam system and starch graft gel system with high temperature resistance were screened out, and displacement experiments in one-dimensional heterogeneous cores were carried out. Through the three-dimensional experimental model and numerical model of a 5-spot well pattern, physical experiments and numerical simulations were carried out respectively to study water control and oil increase. The experimental results showed that the foam composite system had good temperature resistance up to 140 °C and oil resistance up to 50% oil saturation and was helpful to adjust the heterogeneous profile in a high temperature of 105 °C. The starch graft gel system had good injection performance, with a solution viscosity of 18.15 mPa·s, and its gel strength could effectively seal the high-permeability layer, with a gel viscosity of 34950.92 mPa·s. The displacement test results showed that after a preliminary implementation of N₂ foam flooding, N₂ foam flooding combined with gel plugging could still improve oil recovery by 5.26%. Compared with preliminary N₂ foam flooding, gel plugging could control the water channeling in the high-permeability zone near the production wells. The combination of foam and gel made N₂ foam flooding and subsequent waterflooding divert to flow mainly along the low-permeability layer, which was conducive to enhance water management and improve oil recovery. This method can be used as an effective technology to manage similar heterogeneous reservoirs.

Environmental awareness is receiving increasing attention in the petroleum industry, especially when associated with chemical agents applied in enhanced oil recovery (EOR) technology. The bio-based surfactant sodium cocoyl alaninate (SCA) is environmentally friendly and can be easily biodegraded, which makes it a promising alternative to traditional surfactants. Herein, the SCA surfactant is proposed as a foaming agent for enhanced oil recovery. Laboratory investigations on the surfactant concentration, foaming performance, microbubble characterization, interfacial tension, and foam-flooding of the traditional surfactants SDS and OP-10 have been conducted. In particular, the anti-salt abilities of these three surfactants have been studied, taking into consideration the reservoir conditions at Bohai Bay Basin, China. The results show that concentrations of 0.20 wt%, 0.20 wt% and 0.50 wt% for SCA, SDS and OP-10, respectively, can achieve optimum foaming ability and foaming stability under formation salinity conditions, and 0.20 wt% SCA achieved the best foaming ability and stability compared to 0.20 wt% SDS and 0.50 wt% OP-10. Sodium fatty acid groups and amino acid groups present in the SCA molecular structure have high surface activities under different salinity conditions, making SCA an excellent anti-salt surfactant for enhanced oil recovery. The microstructure analysis results showed that most of the SCA bubbles were smaller in size, with an average diameter of about 150 μm, and the distribution of SCA bubbles was more uniform, which can reduce the risk of foam coalescence and breakdown. The IFT value of the SCA/oil system was measured to be 0.157 mN m⁻¹ at 101.5 °C, which was the lowest. A lower IFT can make liquid molecules more evenly distributed on the surface, and enhance the elasticity of the foam film. Core-flooding experimental results showed that a 0.30 PV SCA foam and secondary waterflooding can enhance oil recovery by more than 15% after primary waterflooding, which can reduce the mobility ratio from 3.7711 to 1.0211. The more viscous SCA foam caused a greater flow resistance, and effectively reduced the successive water fingering, leading to a more stable driving process to fully displace the remaining oil within the porous media. The bio-based surfactant SCA proposed in this paper has the potential for application in enhanced oil recovery in similar high-salt oil reservoirs.

Lost circulation events during drilling operations are known for their abruptness and are difficult to control. Traditional diagnostic methods rely on qualitative indicators, such as mud pit volume changes or anomalous logging curve patterns. However, these methods are subjective and rely heavily on empirical knowledge, resulting in delayed or inaccurate predictions. To address this problem, there is an urgent need to develop efficient methods for a timely and accurate lost circulation prediction. In this study, a novel approach is proposed by combining principal component analysis (PCA) and empirical analysis to reduce the dimensionality of the model data. This dimensionality reduction helps to streamline the analysis process and improve prediction accuracy. The predictive model also incorporates an improved fruit fly optimization algorithm (IFOA) in conjunction with support vector machine (SVM) techniques. The actual instances of lost circulation serve as the evaluation criteria for this integrated method. To overcome the challenges associated with irregular population distribution within randomly generated individuals, a tent map strategy is introduced to ensure a more balanced and representative sample. In addition, the model addresses issues such as premature convergence and slow optimization rates by employing a sine-cosine search strategy. This strategy helps to achieve optimal results and speeds up the prediction process. The improved prediction model demonstrates exceptional performance, achieving accuracy, precision, recall, and F1 scores of 96.8, 97, 96, and 96%, respectively. These results indicate that the IFOA-SVM approach achieves the highest accuracy with a reduced number of iterations, proving to be an efficient and fast method for predicting the lost circulation events. Implementation of this methodology in drilling operations can lead to improved efficiency, reliability, and overall performance.

In view of the problems of low liquid production, a high proportion of high water cut wells, and poor development effect in the late stage of water flooding in the special sandstone reservoir of Niuquanhu "low permeability and medium viscosity crude oil", we carried out the research on hydrocarbon gas oil recovery and its influencing factors. First, the influence of different injected gas media on the physical properties of crude oil was analyzed. Second, the core displacement experiments of different gas injection media including CO₂, CH₄, and hydrocarbon gas were carried out by using the method of oil recovery comparison and optimization. Third, the indoor experimental study on the oil recovery of different influencing factors was carried out by using the method of controlling variables of influencing factors. Finally, the influence degree of different influencing factors on oil recovery was analyzed by a Spearman rank correlation coefficient analysis. The experimental results showed that the oil recovery of hydrocarbon gas is higher than that of CO₂ and CH₄, which were 57, 51, and 18% respectively. This is mainly because hydrocarbon gas is similar to the components of crude oil and is more easily dissolved in crude oil. The experimental results of influencing factors showed that the higher the content of C₂-C₄, the higher the oil recovery, and the content of C₂-C₄ will affect its dissolution with crude oil and its interaction with heavy component crude oil. The larger the permeability ratio, the lower the oil recovery, which was mainly due to the uneven distribution of injected gas in different regions. The higher the permeability, the lower the oil recovery, which was also due to the serious heterogeneity of the low permeability core of Niuquanhu; The results of Spearman rank correlation coefficient analysis based on different influencing factors and oil recovery showed that the order of influence of different factors on oil recovery was C₂-C₄ content > permeability ratio > permeability > back pressure > gas injection rate. In the development process of hydrocarbon gas injection, we should control the C₂-C₄ content, back pressure, and injection rate. The research in this study not only provides theoretical support for gas injection enhanced oil recovery technology in "low permeability and medium viscosity crude oil" reservoirs but also provides a new idea for the ranking of influencing factors.