The reinforcement of soils is the technique that geotechnical engineers currently use to improve the shear strength and bearing capacity parameters, especially when the land available for the execution of a project is not able to withstand the structural loads to which it is subjected. One of the techniques, used for this purpose since ancient times, is the incorporation of fibers into the soil matrix; however, great interest in its study has only begun in the last two, mainly because it constitutes a low-cost and environmentally friendly alternative. In this paper, a brief bibliographic review is presented on seven of the natural fibers that are currently used in order to improve the mechanical behavior of expansive clay soils (bamboo, jute, coco, palm, sugar cane bagasse, rise husk, and sawdust). It can be concluded that in many cases, the addition of certain amounts of natural fibers increases the parameters of resistance to the cutting of soils.

The aquaculture sector is experiencing remarkable growth, and its economic success depends mainly on an efficient production strategy and cost management, which are essential to guarantee the profitability and sustainability in this sector. The main objective of this study was to analyze the production costs and growth performance of Oreochromis niloticus in the most successful intensive production systems: Recirculating Aquaculture System (RAS), Aquaponic System (AS), and Biofloc Technology (BFT). Data collection involved extensive searches in various academic and scientific databases, resulting in the selection of 52 published articles from 2008 to 2024, following a rigorous analysis of inclusion criteria. Results showed that the rentability of the aquaculture production systems for Tilapia production is underexplored in the scientific community, with less than 20% of articles reporting economic variables, while around 80% of them reported growing variables and water quality without considering economic variables. Costs associated with production and economic indicators must also be viewed as important indicators for aquaculture producers as a reference for the investment in RAS, AS, and BFT technologies. The research in the aquaculture field has seen a resurgence in studies on production, design, water quality, and the recent integration of technologies to increase production.

A frequent problem in geotechnics is soils with inadequate physical–mechanical properties to withstand construction work, incurring cost overruns caused by their engineering improvement. The need to improve the engineering properties of soils is not recent. The most common current alternatives are binders such as cement and lime. The climate change observed in recent decades and the uncontrolled emission of greenhouse gases have motivated geotechnical and geoenvironmental researchers to seek mechanisms for soil reinforcement from a more sustainable and environmentally friendly approach by proposing the use of recycled and waste materials. An alternative is natural fibers, which can be obtained as waste from many agro-industrial processes, due to their high availability and low cost. Sawdust, as a by-product of wood processing, has a rough texture that can generate high friction between the fiber and the matrix of the soils, leading to a significant increase in its shearing strength and bearing capacity. This concept of improving the properties of soils using natural fibers distributed randomly is inspired by the natural phenomenon of grass and/or plants that, when growing on a slope, can effectively stabilize the said slope.

Energy production in constructed wetlands is a little-known field, as is the operation of vertical partially saturated constructed wetlands (VPS-CWs) that promote both aerobic and anaerobic microbial interactions. By doing so, bacterial degradation is increased, becoming the main mechanism of pollutant removal in constructed wetlands (CWs). For the first time, the generation of bioelectricity, together with the production of ornamental plants in vertical partially saturated constructed wetlands during the treatment of domestic wastewater, was evaluated. Six VPS-CW systems functioned as bioelectricity generators, where the systems were filled with red volcanic gravel and activated carbon as anode and cathode. Three systems were planted with Zantedeschia aethiopica and three with Canna hybrids plants. The development was measured through mother plants and shoots produced every 60 days. The input and output of each VPS-CW was monitored using control parameters such as BOD₅, phosphates (P-PO₄), and total Kjeldahl nitrogen (TKN). Bioelectricity, power, voltage, and current measurements were performed every 15 days for a period of 7 months. It was found that the VPS-CWs used as biobatteries in combination with the use of domestic wastewater as a substrate improved the development of the two evaluated plant species and stimulated growth and germination of new shoots. No significant differences were found between the different treatments (p ≤ 0.05). Likewise, an average efficient removal of BOD₅ (98%) for both systems without statistical differences was observed (p ≤ 0.05), but for TKN and P-PO₄, significant differences (p ≤ 0.05) were found between systems planted with Z. aethiopica (TKN: 65%; P-PO₄: 20%) and Canna hybrids (TKN: 69%; P-PO₄: 27%). This method of water treatment and bioelectricity production with Canna hybrids was an efficient system that generated a great electric current (140 mA/m²), voltage (750 mV), and electric power (15 mW/m²), compared with those observed in systems with Z. aethiopica (60 mA/m², 500 mV, 9 mA/m²).

Tilapia farming is the predominant aquaculture activity, with 4623 aquaculture farms in Mexico alone. It is relevant to apply technological alternatives to mitigate production costs, mainly those associated with supporting energy savings for aeration and water pumping in aquaculture farms. There is limited information confirming the feasibility of implementing photovoltaic systems connected to the grid (On grid-PV) in aquaculture farms. The working hypothesis proposed for the development of the work was that On Grid PV systems in Tilapia aquaculture farms in Mexico are technically feasible, economically viable and environmentally acceptable. Therefore, the objective of this research is to design a grid-connected photovoltaic system for rural Tilapia aquaculture farms in Mexico and analyze it with a feasibility assessment through technical, economic and environmental variables, as part of the link between academia and the productive sector. Methodologically, the On Grid-PV design was carried out in an aquaculture farm in Veracruz, Mexico, as a case study. It was developed in two stages: the field phase (1), where a non-participant observation guide and a survey with open questions were applied to perform the energy diagnosis, and the cabinet phase (2) where the calculation of the economic and environmental variables was carried out with the clean energy management software Retscreen expert, the engineering design was based on the Mexican Official Standard for electrical installations, and Sunny Design 5.22.5 was used to calculate and analyze the electrical parameters of the On Grid PV. The results revealed an investment cost of USD 30,062.61, the cost per KWp was of 1.36 USD/Watt, and the economic indicators were the net present value (USD 41,517.44), internal rate of return (38.2%) and cost–benefit ratio (5.6). Thus, the capital investment is recovered in 4.7 years thanks to the savings obtained by generating 2429 kW/h per month. As for the environment, it is estimated that 11,221 kg of CO2 equivalent would be released into the atmosphere without the On Grid-PV. In conclusion, the hypothesis is accepted and it is confirmed that On Grid-PV installations for Tilapia farms are technically feasible, economically viable and environmentally acceptable; their implementation would imply the possibility for aquaculture farms to produce Tilapia at a lower production cost and minimized environmental impact in terms of energy. It is recommended that aquaculture farmers in Mexico and the world implement this eco-technology that supports the sustainable development of aquaculture.

The rapid growth of urban areas has increased the need for more efficient methods of pavement inspection and maintenance. However, conventional techniques remain slow, labor-intensive, and limited in spatial coverage, and their performance is strongly affected by traffic, weather conditions, and operational constraints. In response to these challenges, it is essential to synthesize the technological advances that improve inspection efficiency, coverage, and data quality compared to traditional approaches. Herein, we present a systematic review of the state of the art on the use of unmanned aerial vehicles (UAVs) for monitoring and assessing pavement deterioration, highlighting as a key contribution the comparative integration of sensors (photogrammetry, LiDAR, and thermography) with recent automatic damage-detection algorithms. A structured review methodology was applied, including the search, selection, and critical analysis of specialized studies on UAV-based pavement evaluation. The results indicate that UAV photogrammetry can achieve sub-centimeter accuracy (<1 cm) in 3D reconstructions, LiDAR systems can improve deformation detection by up to 35%, and AI-based algorithms can increase crack-identification accuracy by 10% to 25% compared with manual methods. Finally, the synthesis shows that multi-sensor integration and digital twins offer strong potential to enhance predictive maintenance and support the transition towards smarter and more sustainable urban infrastructure management strategies.