Nikolai Weitz

Mr. Nikolai Weitz

University of Erlangen-Nuremberg, Erlangen, Bavaria, Germany
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 January 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Open access
NWNikolai Weitz
Nikolai Weitz
SUSamuel Utzelmann
Samuel Utzelmann
SDStefan Ditze
Stefan Ditze
MMMartin Marz
Martin Marz
In this article, a resonant push–pull dc–dc converter suitable for switching frequencies in the MHz-range is investigated. Despite a simple design procedure with no need of multiresonant tuning, the converter topology is capable of providing a constant output current over a wide output voltage range in unregulated operation. Based on an analytical solution of steady-state operation, normalized dependencies of converter behavior are determined and used to formulate generalized design considerations. In order to verify the theoretical analysis, the design procedure of a 300-W prototype operating at a switching frequency of 6.78 MHz is described considering the impact of circuit parasitics on converter operation. The prototype provides a stable operation within the full output voltage range of 0–150 V and reaches a peak efficiency of 93% at the nominal output voltage. A rapid transient response of the converter is demonstrated by applying a closed-loop on / off -control to the prototype.

8 June 2022 in Electronics
Verified
Journal Article
Open access
PDF file
SDStefan Ditze
Stefan Ditze
SEStefan Ehrlich
Stefan Ehrlich
NWNikolai Weitz
Nikolai Weitz
MSMarco Sauer
Marco Sauer
FAFrank Aßmus
Frank Aßmus
PMPatrick Meißner
Patrick Meißner
This paper proposes a portable 11 kW off-board charger for electric vehicles. In the ac/dc stage, a three-phase power factor correction (PFC) in Vienna topology is chosen. The loss and volume of the PFC inductance are calculated over a wide range of parameters and optimized with regard to design, winding, and core material. A three-phase LLC resonant converter operating at 1 MHz is chosen for the galvanically isolated dc/dc stage. A parametrizable loss model of the high-frequency transformer and the resonance inductor is developed to minimize volume, weight, and losses. With the help of an automated algorithm using these loss models, the inductive components are optimized in terms of winding specification, magnetic material, and core geometry, verified by finite element analysis and measurements. For the ac/dc stage, 900 V SiC devices are adopted, and 1200 V SiC devices are used in the primary and secondary sides of the dc/dc stage. A variable dc-link voltage is utilized to adjust the charging profile and to operate the LLC resonant converter at the most efficient point near the series resonance frequency. A mechatronically integrated portable air-cooled off-board charger prototype with 11 kW, three-phase 400 VAC input, and 620–850 VDC output is realized and tested. The prototype demonstrates a power density of 2.3 kW/liter (37.7 W/in³), a peak efficiency of 96%, and 95.8% efficiency over the defined battery voltage range.

15 October 2025 in IEEE Transactions on Power Electronics
Verified
Journal Article
Open access
RSRaffael Schwanninger
Raffael Schwanninger
NSNiklas Stöcklein
Niklas Stöcklein
NWNikolai Weitz
Nikolai Weitz
XYXiaotian Yang
Xiaotian Yang
MMMartin Maerz
Martin Maerz
This article introduces a control strategy for a modular multiactive bridge architecture that extends the single phase shift as a novel approach to enable fully decentralized control of the modular active cell (MAC) on a single, arbitrarily large multiwinding transformer. The MAC aims to provide a fully modular, configurable, and scalable solution for solid state transformers and energy routers, enabling full power and voltage variability in isolated interconnections of diverse dc networks. A novel modeling approach based on discrete-time state-space is introduced. The model is verified through measurements and simulation, showing high accuracy and prediction capability.

11 August 2022 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Open access
AAAdrian Amler
Adrian Amler
NWNikolai Weitz
Nikolai Weitz
MMMartin Maerz
Martin Maerz
In recent years, research on Wireless Power Transfer and Switched-Mode Power Supplies with a capacitive coupling link has been on the rise. Whereas many researchers investigate resonant coupling links, often resulting in tough requirements for the involved inductors, this paper focuses on the elimination of all inductive components in the coupling link and the rectifier through the use of a non-resonant capacitive link. We propose a converter with a resonant single-ended push-pull inverter operating at radio frequencies of e.g. 13.56 MHz to directly drive the non-resonant capacitive power transfer link. The ability of the converter to operate at a high frequency and to facilitate a significant voltage change across the link capacitors improves the power transfer characteristics of the system compared to previously published systems with a non-resonant capacitive link. Said combination is also beneficial for the transient behavior, parameter variation robustness, an easy design process, simplified drive requirements, and a predictable and limited capacitor voltage stress. The presented converter transmits 122.9 W across an effective link capacitance of 120 pF, leading to the highest input voltage-normalized power transfer to link capacitance value of 13.7 W/(nF∙V) among previously published capacitive power transfer systems with a non-resonant link.