Department of Electrical and Computer Engineering and the Department of Chemical Engineering, Northeastern University, 440 DA, 360 Huntington Ave, Boston, MA 02115-5000, USA
Prof. Vincent G Harris
Department of Electrical and Computer Engineering and the Department of Chemical Engineering, Northeastern University, 440 DA, 360 Huntington Ave, Boston, MA 02115-5000, USA
We report, for the first time, correlations between crystal structure, microstructure and magnetofunctional response in directionally solidified [110]-textured Fe83Ga17Erx (0 < x < 1.2) alloys. The morphology of the doped samples consists of columnar grains, mainly composed of a matrix phase and precipitates of a secondary phase deposited along the grain boundary region. An enhancement of more than ~275% from ~45 to 170 ppm is observed in the saturation magnetostriction value (λs) of Fe83Ga17Erx alloys with the introduction of small amounts of Er. Moreover, it was noted that the low field derivative of magnetostriction with respect to an applied magnetic field ( for Happ up to 1000 Oe) increases by ~230% with Er doping ( 0.045 ppm/Oe; 0.15 ppm/Oe). The enhanced magnetostrictive response of the Fe83Ga17Erx alloys is ascribed to an amalgamation of microstructural and electronic factors, namely: (i) improved grain orientation and local strain effects due to deposition of Er in the intergranular region; and (ii) strong local magnetocrystalline anisotropy, due to the highly anisotropic localized nature of the 4f electronic charge distribution of the Er atom. Overall, this work provides guidelines for further improving galfenol-based materials systems for diverse applications in the power and energy sector.
The material parameters of an electromagnetic bandgap (EBG) metamaterial consisting of metallic Sievenpiper structures prepared upon a Co2Z hexaferrite substrate having μr = 12 to 14 and εr = 10 to 12 are reported. A bandwidth of 50%-75% of L-band was realized in simulation. The synthesis of the Co2Z hexaferrite material with optimized properties was achieved via a modified aqueous coprecipitation method with yields of up to 25 g/L. Magnetically oriented Co2Z substrates were demonstrated to exhibit a zero-field ferromagnetic resonance frequency of ~1.1 GHz that enabled device application from ultrahigh frequency (UHF) through L-band frequencies. EBG metamaterials designed and simulated on an oriented Co2Z hexaferrite substrate were compared to standard dielectric EBG designs. Results indicate that standard dielectric EBG designs, which operate over a 50% bandwidth and profile height of ~λo/10, are replaceable with an equivalent bandwidth Co2Z EBG metamaterial designed to a height of ~λo/95. The applications of the proposed metamaterial toward ultralow profile antenna designs at UHF through L-band are discussed.
26 September 2011 in IEEE Transactions on Magnetics
We design a multiferroic laminated heterostructure composed of a Fe-Ga magnetostrictive layer and a PMN-PT piezoelectric layer and examine the converse magnetoelectric effect (CME). Such a heterostructure is potentially useful as a magnetic field generator, which can be used in the tuning of microwave devices. Magnetization, magnetic coercivity, remanence, and squareness exhibit pronounced hysteretic behavior and potential for tuning with an applied electric field. We obtain αE=12.5 Oe cm kV-1. The deformation of the PMN-PT under an applied electric field results in an internal stress-induced magnetic field, with an experimentally determined value of ~100 Oe. The tunable range of fringe fields generated by the stress-induced field is predicted to be 104 Oe. The results will establish a foundation in the design of E-field tunable magnetic devices.
The effect of ambient aging upon the magnetic and structural properties of heat-treated mechanically alloyed Mn0.53Al0.47-xCx powders was systematically investigated. Their properties were examined after 6, 15, 21 and 52 weeks of aging. XRD data revealed no detectable structural changes in the carbon-doped alloys. With x = 0.01 and 0.015, the magnetic properties were stable up to 52 weeks with only a slight variation of ~7%-10%. Conversely, with x = 0, magnetic property variations greater than 30% were demonstrated. This confirms that carbon doping of the MnAl alloys not only improves the stability of the τ phase during heat-treatment but also over a prolonged period of time. Curie temperature (TC) of the alloys was determined using the first derivative of the differential scanning calorimetry (DSC) data. Only 1% decrease in TC was observed for the aged heat-treated alloy with x =0.01 compared to that for the pre-aged alloy.
Sendust sheets containing highly in-plane aligned flakes embedded in a nonmagnetic polymer matrix were prepared by tape casting and rolling methods. Experiments indicate that the tape-cast sheets exhibited an improved alignment of flakes along the plane of the sheets, resulting in a pronounced enhancement in complex permeability, compared with those of the rolled sheets. The enhanced permeability was attributed to an induced shape anisotropy field due to the aligned flakes. More interestingly, microwave measurements revealed that a 2 mm-thick tape-cast sheet was measured to have a reflection loss (RL) less than -15 dB. In comparison with that of the rolled sheets, the RL was dramatically reduced by 114%, while the bandwidth less than -10 dB was broadened by 0.7 GHz. These results demonstrate the potential of the tape-cast technique for the production of high-performance microwave absorption sheets.