1 March 2016 in Journal of Magnetism and Magnetic Materials
20 June 2016 in Scientific Reports
In recent years, multifunctional materials contained simultaneous ferroelectric and ferromagnetic ordering have been realized. Here, a real time room temperature adaptive materials system, which demonstrates an RF magnetodielectric (MD) response, i.e., CexY3−xFe5O12 (x = 0, 0.05, 0.1, 0.15, 0.2), is reported. The magnetic and dielectric properties of Ce-doped YIG microwave ferrites processed by a traditional ceramic route have been measured over a frequency range of 4–8 GHz (C-band). The substitution of Ce not only enhances the microwave electromagnetic properties of the YIG, but also modulates the magnetodielectric response. The maximum magnetodielectric response in Ce-doped YIG sample ranges in magnitude from approximately +5% to −5% under an applied field of 1.78 kOe. This effect was attributed to electron fluctuations on the Fe cation sites. Furthermore, the magnitude of the MD response was shown to be enhanced by the cerium content. It is believed that research of the magnetodielectric effect in YIG ferrites is of great importance to the development of next generation multifunctional adaptive microwave materials, devices and integrated circuits.
2 December 2008 in Physica Status Solidi (a)
15 February 2012 in Journal of Alloys and Compounds
3 March 2016 in AIP Advances
The static and dynamic magnetic properties of cerium (Ce) doped yttrium iron garnet CexY3−xFe5O12 (x=0, 0.05, 0.1, 0.15, 0.2) ferrites (YIG) have been reported in this work. The ferrites were fabricated by the traditional solid-state reaction method. All ferrite samples reveal pure garnet structure identified by x-ray diffraction (XRD). The substitution of cerium not only enhances the saturation magnetization of the samples, but also regulates the magnetocrystalline anisotropy constant K1. Obvious differences in permeability spectra over a frequency of 1 MHz - 1 GHz can be observed. It is verified that the permeability dispersion and magnetic losses of Ce-doped YIG ferrite contain the contribution of Richter aftereffect relaxation due to the existence of Fe2+ ions. The fitting results of the permeability spectra applied three-mechanism model is in good agreement with experimental data, which successfully explains the mechanisms of magnetic losses observed at 1 MHz to 1 GHz for Ce-doped YIG ferrite. In addition, the frequency shift of Richter aftereffect has also been discussed.
16 June 2015 in IEEE Transactions on Magnetics
Sendust sheets containing highly in-plane aligned flakes embedded in a nonmagnetic polymer matrix were prepared by tape casting and rolling methods. Experiments indicate that the tape-cast sheets exhibited an improved alignment of flakes along the plane of the sheets, resulting in a pronounced enhancement in complex permeability, compared with those of the rolled sheets. The enhanced permeability was attributed to an induced shape anisotropy field due to the aligned flakes. More interestingly, microwave measurements revealed that a 2 mm-thick tape-cast sheet was measured to have a reflection loss (RL) less than -15 dB. In comparison with that of the rolled sheets, the RL was dramatically reduced by 114%, while the bandwidth less than -10 dB was broadened by 0.7 GHz. These results demonstrate the potential of the tape-cast technique for the production of high-performance microwave absorption sheets.