In future wireless systems, a large number of users may access the networks via moving relays (MRs) installed on top of vehicles. One of the main challenges of MRs is rapid channel variation, which may make channel estimation and its following procedures difficult. To address these issues, various schemes are designed, among which the predictor antenna (PA) is a candidate. The PA setup refers to a system with two (sets of) antennas on top of a vehicle, where the PA(s) positioned in front of the vehicle is (are) utilized to predict the channel state information required for data transmission to the receive antennas aligned behind the PA. In this article, we introduce the concept and the potential of PA systems. Moreover, summarizing the field trials for PAs and the 3GPP attempts on (moving) relays, we compare the performance of different PA and non-PA methods for vehicle communications in both urban and rural areas with the PA setup backhauled through terrestrial or satellite technology, respectively. As we show, with typical parameter settings and vehicle speeds, a single-antenna PA-assisted setup can boost the backhaul throughput of MRs, compared to state-of-the-art open-loop schemes, by up to 50 percent.
4 August 2025 in IEEE Open Journal of the Communications Society
Integrated sensing and communication (ISAC) enables radio systems to simultaneously sense and communicate with their environment. This paper, developed within the Hexa-X-II project funded by the European Union, presents a comprehensive cross-layer vision for ISAC in 6G networks, integrating insights from physical-layer design, hardware architectures, AI-driven intelligence, and protocol-level innovations. We begin by revisiting the foundational principles of ISAC, highlighting synergies and trade-offs between sensing and communication across different integration levels. Enabling technologies (such as multiband operation, massive and distributed MIMO, non-terrestrial networks, reconfigurable intelligent surfaces, and machine learning) are analyzed in conjunction with hardware considerations including waveform design, synchronization, and full-duplex operation. To bridge implementation and system-level evaluation, we introduce a quantitative cross-layer framework linking design parameters to key performance and value indicators. By synthesizing perspectives from both academia and industry, this paper outlines how deeply integrated ISAC can transform 6G into a programmable and context-aware platform supporting applications from reliable wireless access to autonomous mobility and digital twinning.
18 March 2025 in IEEE Open Journal of the Communications Society
Millimeter-wave (mmWave) communication is a vital component of future generations of mobile networks, offering not only high data rates but also precise beams, making it ideal for indoor navigation in complex environments. However, the challenges of multipath propagation and noisy signal measurements in indoor spaces complicate the use of mmWave signals for navigation tasks. Traditional physics-based methods, such as following the angle of arrival (AoA), often fall short in complex scenarios, highlighting the need for more sophisticated approaches. Digital twins, as virtual replicas of physical environments, offer a powerful tool for simulating and optimizing mmWave signal propagation in such settings. By creating detailed, physics-based models of real-world spaces, digital twins enable the training of machine learning algorithms in virtual environments, reducing the costs and limitations of physical testing. Despite their advantages, current machine learning models trained in digital twins often overfit specific virtual environments and require costly retraining when applied to new scenarios. In this paper, we propose a Physics-Informed Reinforcement Learning (PIRL) approach that leverages the physical insights provided by digital twins to shape the reinforcement learning (RL) reward function. By integrating physics-based metrics such as signal strength, AoA, and path reflections into the learning process, PIRL enables efficient learning and improved generalization to new environments without retraining. Digital twins play a central role by providing a versatile and detailed simulation environment that informs the RL training process, reducing the computational overhead typically associated with end-to-end RL methods. Our experiments demonstrate that the proposed PIRL, supported by digital twin simulations, outperforms traditional heuristics and standard RL models, achieving zero-shot generalization in unseen environments and offering a cost-effective, scalable solution for wireless indoor navigation.
9 December 2019 in IEEE Wireless Communications Letters
Predictor antenna (PA) system is referred to as a system with two sets of antennas on the roof of a vehicle, where the PAs positioned in the front of the vehicle are used to predict the channel state observed by the receive antennas (RAs) that are aligned behind the PAs. This letter studies the performance of PA systems in the presence of the mismatching problem, i.e., when the channel observed by the PA is not exactly the same as the channel experienced by the RA. Particularly, we study the effect of spatial mismatching on the accuracy of channel state information estimation and rate adaption. We derive closed-form expressions for instantaneous throughput, outage probability, and the throughput-optimized rate adaptation. Also, we take the temporal evolution of the channel into account and evaluate the system performance in temporally-correlated conditions. The simulation and analytical results show that, while PA-assisted adaptive rate adaptation leads to considerable performance improvement, the throughput and the outage probability are remarkably affected by the spatial mismatch and temporal correlations.
2 February 2021 in IEEE Open Journal of the Communications Society
First-order Marcum $Q$ -function is observed in various problem formulations. However, it is not an easy-to-handle function. For this reason, in this article, we first present a semi-linear approximation of the Marcum $Q$ -function. Our proposed approximation is useful because it simplifies, e.g., various integral calculations including Marcum $Q$ -function as well as different operations such as parameter optimization. Then, as an example of interest, we apply our proposed approximation approach to the performance analysis of predictor antenna (PA) systems. Here, the PA system is referred to as a system with two sets of antennas on the roof of a vehicle. Then, the PA positioned in the front of the vehicle can be used to improve the channel state estimation for data transmission of the receive antenna that is aligned behind the PA. Considering spatial mismatch due to the mobility, we derive closed-form expressions for the instantaneous and average throughput as well as the throughput-optimized rate allocation. As we show, our proposed approximation scheme enables us to analyze PA systems with high accuracy. Moreover, our results show that rate adaptation can improve the performance of PA systems with different levels of spatial mismatch.
24 July 2024 in IEEE Transactions on Machine Learning in Communications and Networking
Millimeter wave (mmWave) multiple-input-multi-output (MIMO) is now a reality with great potential for further improvement. We study full-duplex transmissions as an effective way to improve mmWave MIMO systems. Compared to half-duplex systems, full-duplex transmissions may offer higher data rates and lower latency. However, full-duplex transmission is hindered by self-interference (SI) at the receive antennas, and SI channel estimation becomes a crucial step to make the full-duplex systems feasible. In this paper, we address the problem of channel estimation in full-duplex mmWave MIMO systems using neural networks (NNs). Our approach involves sharing pilot resources between user equipments (UEs) and transmit antennas at the base station (BS), aiming to reduce the pilot overhead in full-duplex systems and to achieve a comparable level to that of a half-duplex system. Additionally, in the case of separate antenna configurations in a full-duplex BS, providing channel estimates of transmit antenna (TX) arrays to the downlink UEs poses another challenge, as the TX arrays are not capable of receiving pilot signals. To address this, we employ an NN to map the channel from the downlink UEs to the receive antenna (RX) arrays to the channel from the TX arrays to the downlink UEs. We further elaborate on how NNs perform the estimation with different architectures, (e.g., different numbers of hidden layers), the introduction of non-linear distortion (e.g., with a 1-bit analog-to-digital converter (ADC)), and different channel conditions (e.g., low-correlated and high-correlated channels). Our work provides novel insights into NN-based channel estimators.