The use of water disinfection as a public health measure reduces the spread of diseases. Various disinfection technologies can be used to meet the pathogen inactivation demand in water. This work is an overview of the main disinfection technologies of wastewater and drinking water that reports for the conventional processes the action mechanism, the possible formation of by-products, the operative conditions, the advantages and disadvantages. For advanced and natural processes the action mechanisms are reported. Advanced technologies are interesting but are still in the research state, while conventional technologies are the most used. There is a tendency, especially in Italy, to use chlorine-based disinfectant, despite in some forms could lead to production of disinfection by-products.
The issues concerning the management of sewage sludge produced in wastewater treatment plants are becoming more important in Europe due to: (i) the modification of sludge quality (biological and chemical sludge are often mixed with negative impacts on sludge management, especially for land application); (ii) the evolution of legislation (landfill disposal is banned in many European countries); and (iii) the technologies for energy and material recovery from sludge not being fully applied in all European Member States. Furthermore, Directive 2018/851/EC introduced the waste hierarchy that involved a new strategy with the prevention in waste production and the minimization of landfill disposal. In this context, biological sewage sludge can be treated in order to produce more stabilized residues: the biosolids. In some European countries, the reuse of biosolids as soil improver/fertilizer in arable crops represents the most used option. In order to control the quality of biosolids used for land application, every Member State has issued a national regulation based on the European directive. The aim of this work is to compare the different approaches provided by European Member States for the reuse of biosolids in agricultural soils. A focus on the regulation of countries that reuse significant amount of biosolids for land application was performed. Finally, a detailed study on Italian legislation both at national and regional levels is reported.
The concrete industry is a core element of the building sector, but it has to deal with the increasing attention on the environmental issues related to the production process: increasing energy efficiency and the adoption of alternative fuels or raw materials represent the most relevant solutions. The present work analyses physical, mechanical, and environmental performances of concrete incorporating residues derived from four main sources (construction and demolition waste, residues from waste treatment, metallurgical industry by-products, and others), as substitutes of either fine or coarse aggregates. Fine aggregates showed the highest number of alternatives and replacement level, with the relevant impact on concrete properties; coarse aggregates, however, always reach a complete replacement, with the exclusion of glass that highly affects the mechanical performance. Construction and metallurgical industry categories are the main sources of alternative materials for both the components, with ceramic and lead slag reaching a full replacement for fine and coarse aggregates.
Similar to other types of waste, sewage sludge (SS) must be minimized, not only to respect the European Directive 2018/851 on waste, but also because the cost of sludge management is approximately 50% of the total running costs of a wastewater treatment plant (WWTP). Usually, minimization technologies can involve sewage sludge production with three different strategies: (i) adopting a process in the water line that reduces the production of sludge; (ii) reducing the water content (dewatering processes) or (iii) reducing the fraction of volatile solids (stabilization). This review, based on more than 130 papers, aims to provide essential information on the process, such as the advantages, the drawbacks and the results of their application. Moreover, significant information on the technologies still under development is provided. Finally, this review reports a discussion on the impact of the application of the proposed processes in the sludge line on a WWTP with a capacity exceeding 100,000 population equivalent (PE).