Chen Shuaishuai

Dr. Chen Shuaishuai

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 July 2018 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
NXNa Xu
Na Xu
XNXinhua Niu
Xinhua Niu
XHXiuqing Hu
Xiuqing Hu
XWXianghua Wang
Xianghua Wang
RWRonghua Wu
Ronghua Wu
Peng ZhangPeng Zhang
Peng Zhang
The advanced MEdium Resolution Spectral Imager (MERSI II) is a major instrument onboard the Chinese FengYun 3D satellite, which was launched in November 2017. Extensive measurements were performed during MERSI II prelaunch testing to ensure effective characterization for on-orbit calibration. This paper gives a brief overview of the prelaunch performance testing conducted for MERSI II, as well as its improvements in terms of instrument design compared to MERSI I. The prelaunch calibration methodology and radiometric performance are detailed, including dynamic range, signal-to-noise ratio, noise equivalent differential temperature, linearity, and response uniformity. The assessment results indicate that most bands perform effectively with mirror specification noncompliances in a few reflective solar bands (RSBs). In addition, investigation of the stability and uniformity of the spherical integrating source indicates that they have a critical impact on the performance assessment and prelaunch calibration of RSBs. The temperature-dependence features of thermal emissive bands' performances are also discussed in terms of their sensitivity to the operating temperature of the focal plane assembly and instrument circumstance. This paper also shows that the self-stability of the calibration source and the representation of the assessment methods are important as they affect the results of instrument performance evaluation.

2 September 2023 in Sensors
Verified
Journal Article
Open access
PDF file
CSChen Shuaishuai
Chen Shuaishuai
XNXinhua Niu
Xinhua Niu
As the non-imaging light of optical instruments, stray light has an important impact on normal imaging and data quantification applications. The FY-3D Medium Resolution Spectral Imager (MERSI) operates in a sun-synchronous orbit, with a scanning field of view of 110° and a surface imaging width of more than 2300 km, which can complete two coverage observations of global targets per day with high detection efficiency. According to the characteristics of the operating orbit and large-angle scanning imaging of MERSI, a stray light radiation model of the polar-orbiting spectrometer is constructed, and the design requirements of stray light suppression are proposed. Using the point source transmittance (PST) as the merit function of the stray light analysis method, the instrument was simulated with all stray light suppression optical paths, and the effectiveness of stray light elimination measures was verified using the stray light test. In this paper, the full-link method of “orbital stray light radiation model-system, internal and external simulation design-system analysis and actual test comparison verification” is proposed, and there is a maximum decrease in the system’s PST by about 10 times after applying the stray light suppression’s optimization design, which can provide a general method for stray light suppression designs for polar-orbit spectral imagers.

29 May 2025 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
LWLing Wang
Ling Wang
CSChen Shuaishuai
Chen Shuaishuai
XHXiuqing Hu
Xiuqing Hu
XNXinghua Niu
Xinghua Niu
HXHanlie Xu
Hanlie Xu
NXNa Xu
Na Xu
The Medium Resolution Spectral Imager-III (MERSI-III), the third generation of the MERSI series, began observations from the Feng Yun-3F (FY-3F) in a sun-synchronous morning orbit on August 3, 2023. MERSI-III collects data from 25 spectral bands, including 19 reflective solar bands (RSBs) and 6 thermal emissive bands with wavelengths ranging from 0.4 to 2.15 μm and 3.7 to 12.5 μm, respectively. Compared with its predecessors, MERSI-III features an enhanced on-orbit calibration capability for RSBs thanks to the incorporation of a newly designed visible on-board calibrator (VOC). This VOC is a solar diffuser (SD)-based on-board calibration system consisting of an SD panel, a solar attenuation plate positioned in front of the SD panel, and an on-board SD degradation monitor. We provide an overview of the MERSI-III instrument, its VOC functions, and the corresponding on-orbit calibration methodologies. The performance of the on-orbit calibration is also assessed using a wide dynamic-integrated vicarious calibration (VC) technique, which combines multiple VC methods, including inter-comparison using invariant pixels, absolute calibration with pseudo-invariant calibration sites, and Rayleigh scattering calibration. Based on three months of validation results, the on-orbit calibration demonstrates strong performance in both absolute accuracy and radiometric stability. Among the 14 validated RSBs, 13 bands meet the basic calibration accuracy requirement of a calibration bias of less than 5%, while 7 bands meet the desired requirement of a calibration bias of less than 3%.