Friction stir welding (FSW) has been recognized as a revolutionary welding process for marine applications, effectively tackling the distinctive problems posed by maritime settings. This review paper offers a comprehensive examination of the current advancements in FSW design, specifically within the marine industry. This paper provides an overview of the essential principles of FSW and its design, emphasizing its comparative advantages when compared with conventional welding techniques. The literature review reveals successful implementations in the field of shipbuilding and offshore constructions, highlighting design factors as notable enhancements in joint strength, resistance to corrosion, and fatigue performance. This study examines the progress made in the field of FSW equipment and procedures, with a specific focus on their application in naval construction. Additionally, it investigates the factors to be considered when selecting materials and ensuring their compatibility in this context. The analysis of microstructural and mechanical features of FSW joints is conducted, with a particular focus on examining the impact of welding settings. The study additionally explores techniques for mitigating corrosion and safeguarding surfaces in marine environments. The study also provides a forward-looking perspective by proposing potential areas of future research and highlighting the issues that may arise in the field of FSW for maritime engineering. The significance of incorporating environmental and economic considerations in the implementation of FSW for extensive marine projects is emphasized.
Fused deposition modeling (FDM) printing of commercial and reinforced filaments is a proven and well-explored method for the enhancement of mechanical properties. However, little has hitherto been reported on the multi-material components, fused or laminated together into a single specimen by using the laminated object manufacturing (LOM) technique for sustainable/renewable polymers. TPU is one such durable and flexible, sustainable material exhibiting renewable and biocompatible properties that have been explored very less often in combination with the ABS polymer matrix in a single specimen, such as the LOM specimen. The current research work presents the LOM manufacturing of 3D-printed flexural specimens of two different, widely used polymers available viz. ABS and TPU and tested as per ASTM D790 standards. The specimens were made and laminated in three layers. They were grouped into two categories, namely ABS: TPU: ABS (ATA) and TPU: ABS: TPU (TAT), which are functionally graded, sandwiched structures of polymeric material. The investigation of the flexural properties, microscopic imaging, and porosity characteristics of the specimens was made for the above categories. The results of the study suggest that ATA-based samples held larger flexural strength than TAT laminated manufactured samples. A significant improvement in the peak elongation and break elongation of the samples was achieved and has shown a 187% increase in the break elongation. Similarly, for the TAT-based specimen, flexural strength was improved significantly from approximately 6.8 MPa to 13 MPa, which represents a nearly 92% increase in the flexural strength. The morphological testing using Tool Maker’s microscopic analysis and porosity analysis has supported the observed trends of mechanical behavior of ATA and TAT samples.
23 June 2022 in Advances in Mechanical Engineering
Conventional manufacturing processes such as casting, forming, welding, machining, etc., have been optimized using different improvement techniques in the last few decades. The alterations in these processes have led to more efficient and productive manufacturing practices for the industry. One of these modification techniques is the deployment of ultrasonic vibrations in conventional manufacturing processes. In the last few decades, ultrasonic vibration assistance to manufacturing processes has seen an uprise and was the point of attraction for different research groups. Several improvements by utilizing ultrasonic vibration in manufacturing practices have been reported by the authors in the past. In this article, an attempt has been made to review all the reported techniques for different conventional processes viz. casting, forming, machining, and welding. The article outlines different research findings from the extensive work on ultrasonic vibration assistance showcasing the improved mechanical and morphological properties. The improvisation in the performance parameters viz. friction reduction, stress reduction, tool wear, surface finish, and grain structure has been witnessed by ultrasonic assistance in contrast to simple manufacturing processes. The outcomes have been summarized along with the optimized set of parameters from various studies.
12 February 2019 in International Journal of Green Energy
Conventional solar photovoltaic (PV) module converts the light component of solar radiation into electrical power, and heat part is absorbed by module increasing its operating temperature. Combined PV module and heat exchanger generating both electrical and thermal powers is called as hybrid photovoltaic/thermal (PV/T) solar system. The paper presents the design of a PV/T collector, made with thin film PV technology and a spiral flow absorber, and a simulation model, developed through the system of several mathematical equations, to evaluate the performance of PV/T water collectors. The effect of various parameters on the thermal and electrical efficiency has been investigated to obtain optimum combination of parameters. Finally, a numerical simulation has been carried out for the daily and annual yield of the proposed PV/T collector, and comparison with a standard PV module is discussed.