Sudhir Kumar

Dr. Sudhir Kumar

Mechanical Engineering, Thapar Institute of Engineering and Technology, Patiala, India, Patiāla, India
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 November 2020 in Journal of Thermoplastic Composite Materials
Verified
Journal Article
Closed access
PDF file
Sudhir KumarSudhir Kumar
Sudhir Kumar
RSRupinder Singh
Rupinder Singh
TSTp Singh
Tp Singh
ABAjay Batish
Ajay Batish
Fused filament fabrication (FFF) is one of the low cost additive manufacturing (AM) techniques capable of printing complex design (both with commercial and non-commercial feedstock filaments by using different processing parameters). In this paper a comprehensive review has been prepared on FFF operating capabilities from thermoplastics material’s view point. Various thermoplastic materials and composites available commercially and prepared at laboratory scale have been categorized based upon the reported studies performed (for thermal stability, mechanical properties etc.). It was observed that the nano composite based feed stock filament (prepared at lab scale) have edge over the micro-composites from thermo-mechanical properties view point. Further it has been noticed that the 3D printing is in changing phase and moving towards 4D printing of smart composites and designs. But hitherto little has been reported on printing of smart material with FFF platform. Further studies may be focused on printing of smart materials (both micro and nano composites) with FFF, as the low cost 3D printing solution in different engineering applications.

2 September 2020 in Journal of Thermoplastic Composite Materials
Verified
Journal Article
Closed access
PDF file
Sudhir KumarSudhir Kumar
Sudhir Kumar
RSRupinder Singh
Rupinder Singh
MSMohit Singh
Mohit Singh
TSTp Singh
Tp Singh
ABAjay Batish
Ajay Batish
The poly-lactic acid (PLA), bio compatible polyamide (PA6) and TiO2 has established bio-medical applications especially in 3D printing of scaffolds. But hitherto little has been reported on improving the performance of multi-material matrix for PLA-PA6/TiO2 especially in 3D printing application of biomedical scaffolds. The anti-bacterial properties of PA6/TiO2 make it worthy to be explored with PLA matrix in multi layered fashion on the platform of fused deposition modeling (FDM) being low cost 3D printing technology for in house development of scaffolds. In this work an effort has been made for in-house development of feedstock filaments of PLA and PA6/TiO2 based polymeric composite matrix on twin screw extrusion (TSE) machine. Further the feedstock filament wires were used on FDM to establish the flexural, wear and morphological properties of multi-material 3D printed functional prototype. The results of the study suggest that for flexural strength, infill speed: 90mm/s; infill pattern: triangular and layer combination as 5 consecutive layers of PLA and 5 consecutive layers of PA6/TiO2 are the optimized conditions for FDM printing. The wear testing results suggest that the composite of PA6/TiO2 held low wear rate (823 µm) in comparison to PLA (wear rate: 1092 µm). Further porosity testing (based upon optical photomicrographs) at ×100 and fractured surface analysis at ×30 supported the observed trends for flexural and wear testing. The photomicrographs of fractured surface were 3D rendered to predict the role of surface roughness (Ra) profile for flexural properties. The mechanical and morphological observations are also supported with scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) analysis.

Verified
Journal Article
Open access
PDF file
SBShalok Bharti
Shalok Bharti
Sudhir KumarSudhir Kumar
Sudhir Kumar
ISInderjeet Singh
Inderjeet Singh
DKDinesh Kumar
Dinesh Kumar
SBSwapnil Sureshchandra Bhurat
Swapnil Sureshchandra Bhurat
Seyed Saeid Rahimian KoloorSeyed Saeid Rahimian Koloor
Seyed Saeid Rahimian Koloor
Friction stir welding (FSW) has been recognized as a revolutionary welding process for marine applications, effectively tackling the distinctive problems posed by maritime settings. This review paper offers a comprehensive examination of the current advancements in FSW design, specifically within the marine industry. This paper provides an overview of the essential principles of FSW and its design, emphasizing its comparative advantages when compared with conventional welding techniques. The literature review reveals successful implementations in the field of shipbuilding and offshore constructions, highlighting design factors as notable enhancements in joint strength, resistance to corrosion, and fatigue performance. This study examines the progress made in the field of FSW equipment and procedures, with a specific focus on their application in naval construction. Additionally, it investigates the factors to be considered when selecting materials and ensuring their compatibility in this context. The analysis of microstructural and mechanical features of FSW joints is conducted, with a particular focus on examining the impact of welding settings. The study additionally explores techniques for mitigating corrosion and safeguarding surfaces in marine environments. The study also provides a forward-looking perspective by proposing potential areas of future research and highlighting the issues that may arise in the field of FSW for maritime engineering. The significance of incorporating environmental and economic considerations in the implementation of FSW for extensive marine projects is emphasized.

28 September 2022 in Polymers
Verified
Journal Article
Open access
Sudhir KumarSudhir Kumar
Sudhir Kumar
ISInderjeet Singh
Inderjeet Singh
SKS. S. R. Koloor
S. S. R. Koloor
DKD. Kumar
D. Kumar
MYM. Y. Yahya
M. Y. Yahya
Fused deposition modeling (FDM) printing of commercial and reinforced filaments is a proven and well-explored method for the enhancement of mechanical properties. However, little has hitherto been reported on the multi-material components, fused or laminated together into a single specimen by using the laminated object manufacturing (LOM) technique for sustainable/renewable polymers. TPU is one such durable and flexible, sustainable material exhibiting renewable and biocompatible properties that have been explored very less often in combination with the ABS polymer matrix in a single specimen, such as the LOM specimen. The current research work presents the LOM manufacturing of 3D-printed flexural specimens of two different, widely used polymers available viz. ABS and TPU and tested as per ASTM D790 standards. The specimens were made and laminated in three layers. They were grouped into two categories, namely ABS: TPU: ABS (ATA) and TPU: ABS: TPU (TAT), which are functionally graded, sandwiched structures of polymeric material. The investigation of the flexural properties, microscopic imaging, and porosity characteristics of the specimens was made for the above categories. The results of the study suggest that ATA-based samples held larger flexural strength than TAT laminated manufactured samples. A significant improvement in the peak elongation and break elongation of the samples was achieved and has shown a 187% increase in the break elongation. Similarly, for the TAT-based specimen, flexural strength was improved significantly from approximately 6.8 MPa to 13 MPa, which represents a nearly 92% increase in the flexural strength. The morphological testing using Tool Maker’s microscopic analysis and porosity analysis has supported the observed trends of mechanical behavior of ATA and TAT samples.

11 June 2019 in Journal of Thermoplastic Composite Materials
Verified
Journal Article
Closed access
PDF file
Sudhir KumarSudhir Kumar
Sudhir Kumar
RSRupinder Singh
Rupinder Singh
TSTp Singh
Tp Singh
ABAjay Batish
Ajay Batish
In this study, a novel route for the preparation of feedstock filaments for fused deposition modelling from recycled high-density polyethylene (HDPE) and low-density polyethylene (LDPE) waste polymers has been explored. For improving the properties of HDPE/LDPE-recycled polymers, Fe powder has been reinforced through single-screw extrusion. It has been observed that Fe powder (from 0 wt% to 25 wt%) in the LDPE and HDPE matrices has shown increasing trend in melt flow index. Furthermore, Fe powder reinforcement resulted in 36.66% improvement in hardness of reinforced HDPE polymer and 64% in LDPE. Mechanical properties (peak elongation, peak strength, break strength and shore D hardness (SDH)) have been improved significantly with the addition of 6 wt% and 10 wt% reinforcement of Fe powder in the matrix of LDPE and HDPE, respectively. The results of study suggest that morphological properties, such as SDH and percentage porosity, have direct relation with mechanical properties as it has been found that the sample with better mechanical properties was also having high hardness and low porosity. Scanning electron microscopy and energy-dispersive X-ray spectroscopy have been performed on 3D printed functional parts and it has been observed that highly dense texture of HDPE and low surface roughness resulted in better mechanical properties.

7 July 2019 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Verified
Journal Article
Closed access
PDF file
Sudhir KumarSudhir Kumar
Sudhir Kumar
RSRupinder Singh
Rupinder Singh
TSTp Singh
Tp Singh
ABAjay Batish
Ajay Batish
This paper reports properties of four different filaments prepared from (i) virgin polylactic acid, (ii) polylactic acid reinforced with polyvinyl chloride, (iii) polylactic acid reinforced with wood powder, and (iv) polylactic acid with reinforcement of Fe3O4 prepared with twin-screw extrusion for possible multimaterial three-dimensional printing. The results suggest that the melt flow rate of composite increases with the increase in reinforcements except for wood powder, which has shown a negative trend. Mechanical properties were also reduced with the loading but with the increase in the Fe3O4 content, these properties were improved. It has been observed that with reinforcement of polyvinyl chloride from 10 wt% to 25 wt% peak elongation and break elongation were reduced by 47.61% and 50%, respectively. Further, thermal analysis suggests that all samples were stable but for reinforced samples, the integral energy has decreased significantly in successive cycles. The vibration sample magnetometery of samples suggested that magnetic properties were dependent on the content of Fe3O4 present in the composite.