Yaxin Zhang

Dr. Yaxin Zhang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 September 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
Chenying WangChenying Wang
Chenying Wang
LLLei Li
Lei Li
WJWeixuan Jing
Weixuan Jing
YZYaxin Zhang
Yaxin Zhang
SWSong Wang
Song Wang
ZJZhuangde Jiang
Zhuangde Jiang
Nano-steps, as classical nano-geometric reference materials, are very important for calibrating measurements in the semiconductor industry; therefore, controlling the height of nano-steps is critical for ensuring accurate measurements. Accordingly, in this study nano-steps with heights of 1, 2, 3 and 4 nm were fabricated with good morphology using atomic layer deposition (ALD) combined with wet etching. The roughness of the fabricated nano-steps was effectively controlled by utilizing the three-dimensional conformal ALD process. Moreover, the relationship between the surface roughness and the height was studied using a simulation-based analysis. Essentially, roughness control is crucial in fabricating nano-steps with a critical dimension of less than 5 nm. In this study, the minimum height of a nano-step that was successfully achieved by combining ALD and wet etching was 1 nm. Furthermore, the preconditions for quality assurance for a reference material and the influencing factors of the fabrication method were analyzed based on the 1 nm nano-step sample. Finally, the fabricated samples were used in time-dependent experiments to verify the optimal stability of the nano-steps as reference materials. This research is instructive to fabricate nano-geometric reference materials to within 5 nm in height, and the proposed method can be easily employed to manufacture wafer-sized step height reference materials, thus enabling its large-scale industrial application for in-line calibration in integrated circuit production lines.

24 June 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
YZYaxin Zhang
Yaxin Zhang
Chenying WangChenying Wang
Chenying Wang
WJWeixuan Jing
Weixuan Jing
SWSong Wang
Song Wang
YZYujing Zhang
Yujing Zhang
ZJZhuangde Jiang
Zhuangde Jiang
A nano-grating standard with accurate linewidth can not only calibrate the magnification of nano-measurement instruments, but can also enable comparison of linewidths. Unfortunately, it is still a challenging task to control the linewidth of nano-grating standards. Accordingly, in this paper, atomic layer deposition (ALD) was used to regulate the linewidth of the one-dimensional grating standards with a pitch of 1000 nm, fabricated by electron beam lithography (EBL). The standards were measured using an atomic force microscope (AFM) before and after ALD, and the linewidth and pitch of the grating were calculated through the gravity center method. The obtained results prove that the width of a single grating line in the standard can be regulated with great uniformity by precisely utilizing ALD. Meanwhile, the proposed method does not affect the pitch of grating, and the measurement uncertainty of standards is less than 0.16% of the pitch, thereby demonstrating a high surface quality and calibration reliability of the standards, and realizing the integration of linewidth and pitch calibration functions. Moreover, the precise and controllable fabrication method of the micro-nano periodic structure based on ALD technology has many potential applications in the fields of optoelectronic devices and biosensors.

17 December 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Chenying WangChenying Wang
Chenying Wang
YDYujing Du
Yujing Du
YZYifan Zhao
Yifan Zhao
ZHZhexi He
Zhexi He
SWSong Wang
Song Wang
MLMing Liu
Ming Liu
The flexible electronics have application prospects in many fields, including as wearable devices and in structural detection. Spintronics possess the merits of a fast response and high integration density, opening up possibilities for various applications. However, the integration of miniaturization on flexible substrates is impeded inevitably due to the high Joule heat from high current density (1012 A/m2). In this study, a prototype flexible spintronic with device antiferromagnetic/ferromagnetic heterojunctions is proposed. The interlayer coupling strength can be obviously altered by sunlight soaking via direct photo-induced electron doping. With the assistance of a small magnetic field (±125 Oe), the almost 180° flip of magnetization is realized. Furthermore, the magnetoresistance changes (15~29%) of flexible spintronics on fingers receiving light illumination are achieved successfully, exhibiting the wearable application potential. Our findings develop flexible spintronic sensors, expanding the vision for the novel generation of photovoltaic/spintronic devices.

1 August 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
Chenying WangChenying Wang
Chenying Wang
DLDi Liu
Di Liu
YZYaxin Zhang
Yaxin Zhang
WJWeixuan Jing
Weixuan Jing
SWSong Wang
Song Wang
ZJZhuangde Jiang
Zhuangde Jiang
Integrated periodic structure reference materials are crucial for calibration in optical instruments and micro-computed tomography (micro-CT), yet they face limitations concerning a restricted measurement range, a single pattern type, and a single calibration parameter. In this study, we address these challenges by developing integrated periodic structure reference materials with an expanded measurement range, diverse pattern types, and multiple calibration parameters through a combination of photolithography and inductively coupled plasma (ICP) etching process. These reference materials facilitate high-efficiency and multi-value calibration, finding applications in the calibration of optical instruments and micro-CT systems. The simulations were conducted using MATLAB (R2022b) to examine the structure-morphology changes during the single-step ICP etching process. The variation rules governing line widths, periods, etching depths, and side wall verticality in integrated periodic structure reference materials were thoroughly evaluated. Linewidths were accurately extracted utilizing an advanced image processing algorithm, while average period values were determined through the precise Fast Fourier Transform method. The experimental results demonstrate that the relative errors of line widths do not exceed 17.5%, and the relative errors of periods do not exceed 1.5%. Furthermore, precise control of the etching depth was achieved, ranging from 30 to 60 μm for grids with line widths 2–20 μm. The side wall verticality exhibited remarkable consistency with an angle of 90° ± 0.8°, and its relative error was found to be less than 0.9%.

20 August 2026 in Nanomaterials
Verified
Journal Article
Open access
PDF file
QZQianqian Zhong
Qianqian Zhong
FHFeng Han
Feng Han
WJWeixuan Jing
Weixuan Jing
YZYifan Zhao
Yifan Zhao
KZKun Zheng
Kun Zheng
ZJZhuangde Jiang
Zhuangde Jiang
Real-time lactate monitoring is essential for clinical diagnostics, sports physiology, and industrial bioprocessing, yet conventional enzymatic sensors suffer from limited stability, narrow operational temperature range, and complex fabrication protocols. Herein, we report a robust non-enzymatic electrochemical sensor based on graphene fibers (GFs), featuring a GF/Au/Ni(OH)2 composite electrode with controllable structure fabricated via sequential electrodeposition. Systematic optimization of deposition parameters established a quantitative relationship between surface architecture and electrochemical response, revealing a critical trade-off between active site density and charge transport efficiency. The sensor achieved optimal performance when both Au and Ni(OH)2 were deposited for 900 s, exhibiting a high sensitivity of 1.24 mA mM−1 cm−2 and a remarkably broad operational temperature range of 0–100 °C. Moreover, the sensor demonstrates excellent repeatability, superior anti-interference capability against common electroactive species, and outstanding long-term durability with 97.8% response retention after 14 days. This work provides a rational design strategy for balancing catalytic activity and transport properties in metal–metal oxide composites, offering a reliable platform for advanced applications in next-generation wearable health-monitoring systems.