Bancha Luadang

Dr. Bancha Luadang


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 November 2019 in IEEE Access
Verified
Journal Article
Open access
BLBancha Luadang
Bancha Luadang
ASArnon Sakonkanapong
Arnon Sakonkanapong
SDSitthichai Dentri
Sitthichai Dentri
RPRassamitut Pansomboon
Rassamitut Pansomboon
CPChuwong Phongcharoenpanich
Chuwong Phongcharoenpanich
This research presents a far-field (FF) antenna with near-field communication (NFC) capability for 3G/4G/LTE mobile devices. The integrated far-and near-field communication (FNFC) antenna was fabricated using conductive silver ink on polyethylene terephthalate (PET) flexible substrate. The FF segment of the antenna is operable in the frequency range of 1.8-2.1 GHz, and the NFC antenna is of dual loop and operable at 13.56 MHz. In the antenna realization, simulations were performed and, to validate, an antenna prototype was fabricated. The experimental results revealed that the FF antenna achieved an impedance bandwidth of 37% (1.52-2.21 GHz), given |S11| of less than -6 dB, with the minimum and maximum efficiency of 92.1% and 98%. The experimental gains are 1.76-2.08 dBi across the target operating frequency band, with near-omnidirectional radiation pattern. The simulation and experimental results are in good agreement. Moreover, the FNFC antenna achieves strong magnetic field distributions in Hx, Hy, and Hz orientations and holds promising potential for 3G/4G/LTE applications.

17 July 2022 in Sensors
Verified
Journal Article
Open access
PDF file
BLBancha Luadang
Bancha Luadang
RPRerkchai Pukraksa
Rerkchai Pukraksa
Pisit JanpangngernPisit Janpangngern
Pisit Janpangngern
KPKhanet Pookkapund
Khanet Pookkapund
SDSitthichai Dentri
Sitthichai Dentri
CPChuwong Phongcharoenpanich
Chuwong Phongcharoenpanich
This research proposed a portable wideband horizontally-polarized directional antenna scheme with a radome for digital terrestrial television reception. The operating frequency band of the proposed antenna scheme is 470–890 MHz. The portable antenna scheme was an adaptation of the Yagi-Uda antenna, consisting of a folded bowtie radiator, a semicircular corrugated reflector, and a V-shaped director. Simulations were carried out, and an antenna prototype was fabricated. To validate, experiments were undertaken to assess the antenna performance, including the impedance bandwidth (|S11| ≤ −10 dB), gain, and unidirectionality. The measured impedance bandwidth was 75.93%, covering 424–943 MHz, with a measured antenna gain of 2.69–4.84 dBi. The radiation pattern was of unidirectionality for the entire operating frequency band. The measured xz- and yz-plane half-power beamwidths were 150°, 159°, 160° and 102°, 78°, 102° at 470, 680, and 890 MHz, with the corresponding cross-polarization below −20 dB and −40 dB. The radome had a negligible impact on the impedance bandwidth, gain, and radiation pattern. The power obtained for the outdoor test, at 514 MHz, was 38.4 dBµV (−70.4 dBm) with a carrier-to-noise ratio (C/N) of 11.6 dB. In addition, the power obtained for the indoor test was 26.6 dBµV (−82.2 dBm) with a C/N of 10.9 dB. The novelty of this research lies in the concurrent use of the Yagi-Uda and bowtie antenna technologies to improve the impedance bandwidth and directionality of the antenna for digital terrestrial television reception.

5 July 2018 in International Journal of Antennas and Propagation
Verified
Journal Article
Open access
PDF file
BLBancha Luadang
Bancha Luadang
RSRewat Senathong
Rewat Senathong
CPChuwong Phongcharoenpanich
Chuwong Phongcharoenpanich
This research presents a miniaturized wideband meander line antenna (MLA) using a magneto dielectric (MD) material for mobile device applications. The proposed MLA attached the lower and upper ground planes of the folder-type chassis, connected electrically by grounding strip. The MD material (ECCOSORB MF-124) was subsequently loaded onto the coupling element area of the MLA. The MD-laden MLA was ultracompact (10 mm × 25 mm × 1 mm), with the electrical size of 0.015λ × 0.039λ × 0.0015λ at 470 MHz. The surface current distribution was simulated to determine the optimal parameters of the MD-laden MLA. To verify, a prototype antenna was fabricated and the experiments were performed. The measured impedance bandwidth (S11<−6 dB) covered the frequency range of 467–1012 MHz (73.6%), with an omnidirectional radiation pattern. The radiation efficiency was in excess of 90%, rendering it suitable for the DVB-H/LTE13/GSM850/900 applications.

1 December 2019
Verified
Conference Paper
Closed access
SDSitthichai Dentri
Sitthichai Dentri
ARAdisak Romputtal
Adisak Romputtal
BLBancha Luadang
Bancha Luadang
This paper presents the design, testing, and development of mechanical arms controlled by servo motors that are affordable for handling small objects. This system uses the Arduino platform which is connected by an XBEE module in order to communicate wirelessly with the computer and the robotic arm at a frequency of 2.4 GHz. The robotic wireless control is developed to be able to interact with a user that is i.e. called graphical user interface (GUI) using LabViewsoftware. It was found that control arm to grip small objects wirelessly, effectively at near range. However, performance will decrease steadily for far distance communication.

8 October 2020 in International Journal of Antennas and Propagation
Verified
Journal Article
Open access
PDF file
SDSitthichai Dentri
Sitthichai Dentri
KPKhanet Pookkapund
Khanet Pookkapund
BLBancha Luadang
Bancha Luadang
PAPrayoot Akkaraekthalin
Prayoot Akkaraekthalin
CPChuwong Phongcharoenpanich
Chuwong Phongcharoenpanich
This research proposes a single-fed broadband circularly polarized (CP) bidirectional antenna operable in 840–960 MHz frequency band for readers of universal UHF-RFID applications. The proposed antenna is comprised of upper-layer conductor, lower-layer conductor, and wall patches. The upper-layer conductor consists of two diagonally aligned rectangular copper plates with a feeding gap at the center, and the lower-layer conductor is of two diagonally adjoined rectangular plates. The upper- and lower-layer conductors are adjoined with the wall patches. The diagonal alignment technique of the upper- and lower-layer plates was used to realize circular polarization and improve 3-dB axial ratio (AR) bandwidth. The double layers were deployed to improve impedance bandwidth (|S11| < −10 dB) and achieve bidirectional radiation pattern. The simulated impedance bandwidth and 3-dB AR bandwidth were 772.19–1014.6 MHz (27.13%) and 675–1000 MHz (38.80%), and the corresponding measured results were 759–1011 MHz (28.47%) and 648–1110 MHz (52.55%). The simulated LHCP/RHCP half-power beamwidth (HPBW), 3-dB AR beamwidth, and gain were 56° – 90°/54° – 92°, 60° – 104°, and 4.94 – 5.89 dBic, while the corresponding measured results were 52° – 98°/62° – 97°, 96° – 126°, and 4.28 – 5.72 dBic. As a result, the single-fed broadband CP bidirectional antenna is applicable to universal UHF-RFID readers. Besides, the novelty of this research lies in the use of diagonal alignment of conducting plates to achieve circular polarization and wider AR bandwidth.

1 December 2019
Verified
Conference Paper
Closed access
POPracha Osklang
Pracha Osklang
ASArnon Sakonkanapong
Arnon Sakonkanapong
SDSitthichai Dentri
Sitthichai Dentri
KLKittima Lertsakwimarn
Kittima Lertsakwimarn
BLBancha Luadang
Bancha Luadang
CPChuwong Phongcharoenpanich
Chuwong Phongcharoenpanich
This paper presents the design, measurement, and development of a bow tie wideband antenna using scutcheon shape with inductive-loaded for DVB applications. The antenna consists of 3 elements; a scutcheon bow tie radiator, a line inductive-loaded and a square reflector. The element of bow tie achieves a lower frequency of 470 MHz. The element of line inductive-loaded achieves an upper frequency of 860 MHz for |S11| of less than −10 dB. The measured results of the prototype antenna are good agreement. The impedance bandwidth of 81.27%, which covering a frequency range from 374 MHz to 886 MHz. The measured gains are flat around 7 dBi over the DVB band. The HPBW in the vertical and horizontal planes are 56.8° and 117.3° at frequency of 660 MHz.