Solid source molecular beam epitaxy is used to explore the growth of carbon films directly on Si(111). It is shown that graphitic carbon is grown by the implementation of a thin amorphous carbon film that suppresses the formation of SiC precipitates. Raman scattering measurements show the D and G vibrational phonon modes, indicating graphitic ordering in the carbon film. X-ray photoelectron spectroscopy is used to verify the formation of bonds in the graphitic carbon films and confirms the suppression of SiC.
Compositionally layered BaxSr1−xTiO3 (Ba0.60Sr0.40TiO3–Ba0.75Sr0.25TiO3–Ba0.90Sr0.10TiO3) 220nm thin film heterostructures were fabricated on Pt coated high resistivity Si substrates via the metal organic solution deposition technique (MOSD). Optimization of the material design was achieved by evaluating two integration schemes, namely, the single- and multianneal process protocols. Materials characterization demonstrated that both film process protocols resulted in smooth, dense, crack-free films with a single phase perovskite structure. Rutherford backscattering spectroscopy revealed compositionally distinct layers and severe elemental interdiffusion for the films fabricated via the multianneal and single-anneal process protocols, respectively. The retention of the compositional layering subsequent to film crystallization deemed the multianneal processed BaxSr1−xTiO3 (BST) film suitable for evaluation of dielectric properties. The dielectric properties were compared to both paraelectric uniform composition BST and to the relevant compositionally graded BST films reported in the technical literature. Our results made evident that the multiannealed compositionally layered BST films possessed higher permittivity (εr=360) and lower dissipation factor (tanδ=0.012) with respect to both uniform composition paraelectric Ba0.60Sr0.40TiO3 film fabricated via the same MOSD processing method and the relevant literature values for compositionally graded BST films. The multilayered BST material design exhibited minimal dielectric dispersion in the range of 90to−10°C, showing a 6.4% decrease in permittivity (corresponding to a temperature coefficient of capacitance TCC20–90=−0.921) as the temperature was elevated from 20to90°C and only a 2.1 increase in permittivity (TCC20–(−10)=−0.716) as the temperature was lowered from 20to−10°C. Additionally, the dielectric tunability of the multilayered BST structures over the temperature range of −10–90°C was temperature independent. Our results show that the multilayered BST design has excellent dielectric properties and the enhanced tunability and dielectric loss are stable over a relatively broad temperature range (−10–90°C), thereby making them excellent candidates for the next generation of enhanced performance temperature stable tunable devices.
Multilayered (BST) films were deposited on Pt coated Si substrates via metalorganic solution deposition. The multilayer heterostructures consisted of three distinct layers of nominal thickness with compositions corresponding to BST , BST , and BST . At room temperature, the heterostructure has a small-signal dielectric permittivity of 360 with a dissipation factor of 0.012 and a dielectric tunability of 65% at . These properties exhibited minimal dispersion as a function of temperature ranging from . These results are explained via a thermodynamic model that incorporates electrical, mechanical, and electromechanical interactions between BST layers.