The integrated thermal protection system (ITPS) is a complicated system that addresses both mechanical and thermal considerations. An M-pattern folded core sandwich panel packed with low-density insulation material provides inherently low mass for a potential ITPS panel. Herein, we identify the most influential geometric parameters and establish a viable, computationally efficient optimization procedure. Variables considered for optimization are geometric dimensions of the ITPS, while temperature and deflection are taken as constraints. A one-dimensional (1D) thermal model based on a modified form of the rule of mixtures was established, while a three-dimensional (3D) model was adopted for linear static analyses. Parametric models were generated to facilitate a design of experiment (DOE) study, and approximate models using radial basis functions were obtained to carry out the optimization process. Sensitivity studies were first conducted to investigate the effect of geometric parameters on the ITPS responses. Then optimizations were performed for both thermal and thermal-mechanical constraints. The results show that the simplified 1D thermal model is able to predict temperature through the ITPS thickness satisfactorily. The combined optimization strategy evidently improves the computational efficiency of the design process showing it can be used for initial design of folded core ITPS.
A folded core is a three-dimensional configuration formed by folding a flat sheet of paper. Similar to foam and honeycomb, folded cores are widely used in aerospace as the cores for sandwich structures due to their excellent mechanical properties and light structural weight. In general, the core’s configuration is heterogeneous and anisotropic, while from a macroscopic point of view it is considered homogeneous. Analytical solutions of equivalent mechanical properties are generally obtained by equivalent methods and modified by numerical simulations due to the complexity of the configuration. We can find the best combination of a core’s parameters by using analytical solutions. The faceted regular folded configuration (RFC), consisting of repetitive identical cells, can be expanded to a plane. According to the principle of equivalent load-deformation, this article investigates the equivalent mechanical properties of the V-type folded core (VFC). The analytical solutions of Ez—equivalent elastic modulus in Direction z, equivalent shear modulus in Plane xz—Gxz, and equivalent shear modulus in Plane yz—Gyz have been obtained and verified by numerical simulations. In addition, the reliability of the equivalent mechanical properties is further demonstrated by the case study. By applying the analytical solutions, the optimization process of VFC can be simplified and sped up, which is of great engineering significance to the aircraft design process.
14 October 2022 in International Journal of Aerospace Engineering
During the flight mission of hypersonic aircraft, severe aerodynamic heating will occur on the surface, so thermal protection system (TPS) is required to protect the load-bearing structure of the aircraft. The present paper develops an engineering software for automatic optimization of the thickness of tile-type TPS for reusable aircraft. For requirements on TPS of reusable aircraft in the reentry stage, the method of heat flow-time curve enveloping, automatic material selection, and one-dimensional unsteady heat transfer calculation for multilayer plates under thermal load conditions had been researched, an interactive engineering software had been developed. The software improves the calculation accuracy and calculation efficiency of TPS thickness optimization, and it is suitable for rapid design in the conceptual design stage of the aircraft. Finally, by an example, the function of the software is verified.
10 February 2022 in International Journal of Aerospace Engineering
Fully developed laminar flow and heat transfer performance of V-pattern folded core sandwich structures subjected to forced convection are numerically investigated. Based on the periodic feature of folded core, a methodology to simulate the fully developed flow and heat transfer state with a few unit cells is developed. The influences of geometric parameters on the coolant flow resistance and heat transfer behaviour are evaluated. Afterwards, approximate models are established based on design to optimize the heat dissipation efficiency. Design variables considered are geometric parameters of the V-pattern folded core, while the corresponding relative density is taken as a constraint. The simulation results show that the presented methodology makes it possible to analyse the fully developed regime with less computing resources. It is found that both pressure drop and heat transfer rate increase with the tortuosity of the flow channel and the inclination of the folded core. The optimization generates a design with a mildly tortuous feature in the streamwise direction to gain a maximum of heat dissipation efficiency under the current conditions.
The effect of heating on the mass of load-carrying structures is analyzed using the weight Komarov formula in the framework of the design calculations by examples of a panel and spar. The results obtained have been compared with the data on real structures of supersonic passenger aircraft and aerospace aircraft of reusable transport systems.
The sandwich plate with folded core is a new type of sandwich structure. It has good design ability and has gained interest in the aerospace industry as a promising sandwich core structure. In this paper, energy absorption characters of M-type folded core are studied. Finite element models are set up for folded cores with different geometric parameters. The calculation result of the finite element model agrees well with the experiment data. And the energy absorption coefficient of folded core is 2.6 times as much as the coefficient of honeycomb core with the same height and density. Besides, influences of each geometric parameter on energy absorption characters are analyzed. And some useful results have been obtained. These results can be helpful when designing folded core as anti-crash structure.