20 December 2017 in International Journal of Aerospace Engineering
The integrated thermal protection system (ITPS) is a complicated system that addresses both mechanical and thermal considerations. An M-pattern folded core sandwich panel packed with low-density insulation material provides inherently low mass for a potential ITPS panel. Herein, we identify the most influential geometric parameters and establish a viable, computationally efficient optimization procedure. Variables considered for optimization are geometric dimensions of the ITPS, while temperature and deflection are taken as constraints. A one-dimensional (1D) thermal model based on a modified form of the rule of mixtures was established, while a three-dimensional (3D) model was adopted for linear static analyses. Parametric models were generated to facilitate a design of experiment (DOE) study, and approximate models using radial basis functions were obtained to carry out the optimization process. Sensitivity studies were first conducted to investigate the effect of geometric parameters on the ITPS responses. Then optimizations were performed for both thermal and thermal-mechanical constraints. The results show that the simplified 1D thermal model is able to predict temperature through the ITPS thickness satisfactorily. The combined optimization strategy evidently improves the computational efficiency of the design process showing it can be used for initial design of folded core ITPS.
1 October 2025 in International Journal of Thermal Sciences
3 September 2025 in Energy
10 February 2022 in International Journal of Aerospace Engineering
Fully developed laminar flow and heat transfer performance of V-pattern folded core sandwich structures subjected to forced convection are numerically investigated. Based on the periodic feature of folded core, a methodology to simulate the fully developed flow and heat transfer state with a few unit cells is developed. The influences of geometric parameters on the coolant flow resistance and heat transfer behaviour are evaluated. Afterwards, approximate models are established based on design to optimize the heat dissipation efficiency. Design variables considered are geometric parameters of the V-pattern folded core, while the corresponding relative density is taken as a constraint. The simulation results show that the presented methodology makes it possible to analyse the fully developed regime with less computing resources. It is found that both pressure drop and heat transfer rate increase with the tortuosity of the flow channel and the inclination of the folded core. The optimization generates a design with a mildly tortuous feature in the streamwise direction to gain a maximum of heat dissipation efficiency under the current conditions.