Zhiyi Leng

Mr. Zhiyi Leng


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 September 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZLZhiyi Leng
Zhiyi Leng
SZShengfang Zhang
Shengfang Zhang
WWWenzhe Wang
Wenzhe Wang
HGHongtao Gu
Hongtao Gu
JYJian Yin
Jian Yin
YLYu Liu
Yu Liu
Hydrogen permeation reduces a material’s properties and increases the risk of brittle fracture, which causes a potential safety hazard. A workpiece’s hydrogen permeation resistance could be improved by improving its surface integrity through surface processing. This paper studies low-alloy steel’s surface integrity and its hydrogen permeation resistance in a hydrogen production reactor, using the electrochemical cathodic hydrogen-charging method to carry out electrochemical hydrogen-charging experiments. After the specimens were pretreated using different surface-grinding methods and shot peening pressure strengthening, they were hydrogen-charged on a self-designed and built electrolytic hydrogen charging platform. Before and after hydrogen charging, the specimens’ section hardness and tensile strength were tested, and the fracture morphology of the specimens was observed. The influence laws of surface roughness and surface residual compressive stress on the distribution of material hardness along the depth, the variation in material hardness, the fracture morphology, and the decline in the tensile properties of the low-alloy steel specimens after 5 h of hydrogen charging were analyzed. The reasons for the influence of surface integrity indexes on the hydrogen permeation resistance of the specimens were also analyzed. Based on the experimental results, a series of mechanical processing parameters were proposed to improve the material’s permeation resistance, which provides a theoretical and practical basis for the processing of materials with high surface integrity and hydrogen permeation resistance. Through the experiments, it was found that the hydrogen permeation resistance of the Ra 0.17 μm surface roughness specimen was the best of all specimens with different surface roughness values, and its hydrogen embrittlement sensitivity index was 20.96%. The specimen had the best hydrogen permeation resistance under 336 MPa surface residual compress stress, and its hydrogen embrittlement sensitivity index was 16.45%.

11 December 2024 in Coatings
Verified
Journal Article
Open access
PDF file
YLYu Liu
Yu Liu
HGHongtao Gu
Hongtao Gu
ZLZhiyi Leng
Zhiyi Leng
CPChuanhao Peng
Chuanhao Peng
ZWZiguang Wang
Ziguang Wang
SZShengfang Zhang
Shengfang Zhang
In a hydrogen production reactor based on the principle of coal-to-hydrogen, the welds, which are considered the weak points, must exhibit a good impact resistance property and high hardness under special operating conditions. This paper investigates the influence of submerged arc welding (SAW) process parameters on the hardness and the impact resistance property of welds in the steel used for a hydrogen reactor. It establishes the relationship between the microstructure of the welds and their hardness and impact resistance property under varying welding parameters. Based on orthogonal welding experiments and a comprehensive balance method, the welding parameters were optimized to obtain the best combination of parameters. The results indicate that as the current and voltage increase, the average hardness of the welds first decreases and then increases, while the impact resistance property initially improves before declining. As the welding speed increases, the average hardness of the welds initially increases and then decreases, while the impact resistance property gradually declines. After optimization under specific experimental conditions, the best welding parameters are determined to be a current (I) of 320 A, a voltage (U) of 34 V, and a welding speed (v) of 33 cm/min. Compared to the base metal, the hardness of the weld increased by 36.1%, and the impact resistance property improved by 71.5%.

21 September 2024 in Machines
Verified
Journal Article
Open access
PDF file
SZShengfang Zhang
Shengfang Zhang
ZLZhiyi Leng
Zhiyi Leng
QDQiang Duan
Qiang Duan
HGHongtao Gu
Hongtao Gu
MLMingjie Lu
Mingjie Lu
YLYu Liu
Yu Liu
Hydrogen permeation resistance in the welded region of 06Cr18Ni11Ti steel is relatively weak due to surface defects, which need high integrity surface machining. The parameters of the welding material for 06Cr18Ni11Ti steel are currently unavailable, which causes some inconvenience for simulation studies. To fill the lack of 06Cr18Ni11Ti steel weld material parameters in the relevant literature at the present stage, the quasi-static tensile test at different strain rates and notch specimen tensile tests were conducted in this paper and determined the Johnson–Cook (J-C) constitutive model parameters and Johnson–Cook failure model parameters. Subsequently, a multi-grain grinding simulation model was built based on W-M fractal dimension theory by using the determined material parameters. The influence of processing parameters on grinding heat was analyzed. Grinding experiments were conducted to analyze the influence of processing parameters on grinding heat and grinding force. By comparing the simulation and experimental results, it is revealed that the average error is 9.37%, indicating relatively small discrepancy. It is demonstrated that the grinding simulation model built in this paper could efficiently simulate the grinding process, and the determined weld material parameters of 06Cr18Ni11Ti steel have been verified to possess high accuracy and reliability.

7 July 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SZShengfang Zhang
Shengfang Zhang
ZLZhiyi Leng
Zhiyi Leng
HGHongtao Gu
Hongtao Gu
JYJian Yin
Jian Yin
ZWZiguang Wang
Ziguang Wang
YLYu Liu
Yu Liu
In order to study the influence of workpiece surface topography on deformation and residual stress during shot peening, the paper built a rough surface single-shot peening simulation model and designed a rough surface workpieces shot peening experiment to verify the correctness of the built simulation model, which differed from the smooth surface simulation model and was closer to the actual processing situation. Based on the W-M fractal dimension theory, the shot peening model of the target with a rough surface is established, and the simulation analysis is carried out by finite element software. The effect of different impact positions of the pellet on surface residual stress and surface displacement were also simulated. The simulation found that with the increase of surface complexity, the surface deformation and residual stress would both increase after shot peening. Through shot peening tests on workpieces with different surface roughness, it is found that the error between simulation and experiment results on surface deformation and residual stress are both less than 20%, which verifies the validity of the rough surface single-shot peening model and that the established model could provide a new method on shot peening simulation analysis.

6 July 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SZShengfang Zhang
Shengfang Zhang
ZLZhiyi Leng
Zhiyi Leng
WWWenzhe Wang
Wenzhe Wang
HGHongtao Gu
Hongtao Gu
JYJian Yin
Jian Yin
YLYu Liu
Yu Liu
Corrosion can hurt the quality and service life of a workpiece, which could create potential safety hazards. However, improving the workpiece’s surface integrity through surface treatment could improve the effect of corrosion resistance. To study the effect of surface integrity on the corrosion resistance of low-alloy steel for hydrogen reactors, electrolytic corrosion experiments were carried out on specimens that were processed using different grit sandpapers or using different shot peening pressures using a self-built electrolytic platform. The influence regulation of initial surface roughness and surface residual stress on the corrosion rate of the low-alloy steel for a hydrogen reactor under different lengths of corrosion time, surface roughness after corrosion, and the tensile property degradation of the specimens after 4 h of corrosion were analyzed, respectively. In this paper, based on experimental research, we obtain the influence regulation of the processing parameters on the corrosion resistance of low-alloy steel for hydrogen reactors and provide processing parameters that could improve the corrosion resistance of low-alloy steel, which guides the corrosion resistance processing of hydrogen production reactors. It was found through experiments that with an increase in the initial surface roughness of the specimens, the corrosion rate of the specimen tends to decrease with the increase in corrosion duration; the surface roughness of the specimen after corrosion first increases and then decreases with the increase in corrosion time; and the tensile strength of specimen with the initial surface roughness of Ra 0.168 μm is relative good after 4 h of corrosion. With the increase in residual compressive stress on the surface of the specimen, the corrosion rate of the specimen decreases with the increase in corrosion time; the surface roughness of the specimen after corrosion first increases and then decreases with the increase in corrosion time; and the tensile strength of specimen with the surface residual stress of −335.64 MPa is relative good after 4 h of corrosion.

31 July 2025 in Coatings
Verified
Journal Article
Open access
PDF file
YLYu Liu
Yu Liu
HGHongtao Gu
Hongtao Gu
JZJincheng Zhang
Jincheng Zhang
ZLZhiyi Leng
Zhiyi Leng
ZWZiguang Wang
Ziguang Wang
SZShengfang Zhang
Shengfang Zhang
To address the issues of hydrogen embrittlement, creep, and fatigue that commonly occur in the welds of hydrogen production reactor operating under hydrogen exposure, high temperature and high pressure, this study proposes adding Si and Mo as reinforcing elements to the welding materials to enhance weld performance. Given the varying performance requirements of different weld layers in the stacked weld, a gradient performance optimization method for the stacked weld of hydrogen production reactors based on the response surface methodology (RSM)–genetic algorithm (GA) is proposed. Using tensile strength, the hydrogen embrittlement sensitivity index, fatigue strain strength, creep rate and weld performance evaluation indices, a high-precision regression model for Si and Mo contents and weld performance indices was established through RSM and analysis of variance (ANOVA). A multi-objective optimization mathematical model for gradient improvement of the stacked weld was also established. This model was solved using a GA to obtain the optimal element content combination added to the welding wire and the optimal weld thickness for each weld layer. Finally, submerged arc welding experiments of the stacked weld were conducted according to the optimization results. The results show that the tensile strength of the base layer, filling layer and cover layer of the stacked weld increased by 5.60%, 6.16% and 4.53%, respectively. Hydrogen embrittlement resistance increased by 70.56%, 52.40% and 45.16%, respectively. The fatigue and creep resistance were also improved. The experimental results validate the feasibility and accuracy of the proposed optimization method.