Yu Liu

Dr. Yu Liu

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 July 2018 in Micromachines
Verified
Journal Article
Open access
PDF file
YLYu Liu
Yu Liu
HCHao Chang
Hao Chang
WZWenchao Zhang
Wenchao Zhang
FMFujian Ma
Fujian Ma
ZSZhihua Sha
Zhihua Sha
SZShengfang Zhang
Shengfang Zhang
When machining a small hole with high aspect ratio in EDM, it is hard for the flushing liquid entering the bottom gap and the debris could hardly be removed, which results in the accumulation of debris and affects the machining efficiency and machining accuracy. The assisted ultrasonic vibration can improve the removal of debris in the gap. Based on dynamics simulation software, Fluent, a three-dimensional (3D) model of debris movement in the gap flow field of EDM small hole machining assisted with side flushing and ultrasonic vibration is established in this paper. The laws of different amplitudes and frequencies and different aspect ratios on debris distribution and movement are quantitatively analyzed. The motion height of debris was observed under different conditions. The research results show that periodic ultrasonic vibration can promote the movement of debris, which is beneficial to the removal of debris in the machining gap. When compared to traditional small hole machining in EDM, the debris in the machining gap were greatly reduced, which ensures the stability of the machining process and improves the machining efficiency.

1 January 2019 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
SZShengfang Zhang
Shengfang Zhang
HQHao Qiang
Hao Qiang
YLYu Liu
Yu Liu
LJL. Jin
L. Jin
FMF. Ma
F. Ma
DYD. Yang
D. Yang
For the serious and uneven wear of the brake pad in the high‐power disc brake during braking, the dynamic variation of the brake disc and the brake pad interface variable is considered, the wear calculation model is established based on the friction and wear mechanism, and the wear depth and volume of the brake pad can be calculated by equations. A finite element model of the brake disc and the brake pad is established by DEFORM software which can analyze wear of the brake pad directly. The variation trend of wear during braking is studied, and influences of braking load and initial braking speed on the wear are analyzed. The results show that the amount of the wear increases rapidly in the early wear stage of braking, and it becomes slow in the later stage; the wear of the brake pad is serious at the friction inlet and outlet, and the middle area of the brake pad is lightly worn; heavy braking load and high initial braking speed can exacerbate the wear of the brake pad.

23 October 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZSZhihua Sha
Zhihua Sha
JLJiacheng Lu
Jiacheng Lu
HQHao Qiang
Hao Qiang
JYJian Yin
Jian Yin
YLYu Liu
Yu Liu
SZShengfang Zhang
Shengfang Zhang
For the unique structural characteristics of ventilated brake discs and the complex problem of energy conversion during braking, a calculation method for energy conversion of the ventilated brake disc based on simultaneous heat generation and heat dissipation is proposed. The transient heat transfer model of the ventilated brake disc for high-speed trains is established. Considering the control equations of heat generation–heat dissipation and plate–cylinder convection heat transfer, the virtual simulation of the energy change of the ventilated brake disc during the braking process is carried out. The temperature and stress distribution of contact friction surface and clearance structure of the ventilated brake disc are analysed from the perspective of function conversion. The results show that the heat generated by the ventilated brake disc increases nonlinearly, and the heat dissipated increases linearly. The heat of ventilated brake disc increases with the increase of braking time, but its growth rate decreases continuously. The maximum temperature of the ventilated brake disc is 268 °C, which appears on the friction surface. After braking, its heat is 6.636 × 106 J. The analysis results and methods provide a basis for optimizing the structure of ventilated brake discs.

14 November 2019 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
YLYu Liu
Yu Liu
WWWenjian Wang
Wenjian Wang
WZWenchao Zhang
Wenchao Zhang
FMFujian Ma
Fujian Ma
DYDapeng Yang
Dapeng Yang
SZShengfang Zhang
Shengfang Zhang
Aiming at the problem of obvious tool length wear and side wear in the small hole processing of EDM, the nickel-coated composite electrode and diamond-nickel-coated composite electrode were prepared by chemical composite coating using brass, copper, molybdenum, and copper-tungsten alloy materials as the matrix material. Comparative experiments of EDM small hole machining using composite tools were carried out on die steel. The effects of nickel-coated composite electrode and diamond-nickel-coated composite electrode on tool length wear, tool side wear, and tool shape change were analyzed. The results show that the diamond-nickel-coated composite electrode can effectively reduce both the length wear and side wear of the electrodes.

14 April 2022 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
ZSZhihua Sha
Zhihua Sha
HQHao Qiang
Hao Qiang
JYJian Yin
Jian Yin
FMFujian Ma
Fujian Ma
YLYu Liu
Yu Liu
SZShengfang Zhang
Shengfang Zhang
For the friction and wear of the braking surface of the disc brake, the mechanism of friction contact deformation of rough surface is analyzed. Considering elastoplastic contact mechanics of the friction surfaces, combined with Archard wear calculation theory, a wear calculation model of fractal rough surface is established, and a wear life prediction of the brake disc is proposed. Based on high-speed and heavy-load braking conditions, the influence of different braking parameters on the surface wear of brake disc is studied. Moreover, a pin-on-disc wear test is used to verify the validity of the wear calculation model, and the average relative error of test and simulation is 4.97%. The research results show that the fractal parameters affect the complexity of the rough surface, and surface wear is mainly caused by interface plastic contact. The friction coefficient is large, which can strengthen the surface shear effect. Large load and high speed would increase the real contact area of the surface and increase the wear volume per unit time. Furthermore, the wear life of the brake disc could be estimated, which is of great significance for raising the wear life of the brake disc, improving braking life and braking efficiency.

24 February 2019 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
SZShengfang Zhang
Shengfang Zhang
WZWenchao Zhang
Wenchao Zhang
PWPuyong Wang
Puyong Wang
YLYu Liu
Yu Liu
FMFujian Ma
Fujian Ma
ZSZhihua Sha
Zhihua Sha
With the development of (electrical discharge machining) EDM technology, composite tools with special features gradually replace the traditional single-material tools and have become widely used in specific processing conditions. In order to predict the wear of composite tool effectively, in this paper, a material removal model of single-pulse EDM with composite tools was established by using the finite element method. The surface temperature distribution of the composite tool was obtained by taking the copper-die steel tool as the analysis object. And the shape of discharge crater as well as the removal volume was obtained by the element birth and death method. The influences of discharge parameters and tool materials on the removal volume were analyzed respectively. The EDM experiments were carried out by using copper-die steel as the composite tool to verify the simulation results. It shows that the errors between actual machining results and the simulation results are less than 10%, which proves the accuracy of the simulation model.