With the explosive growth of smart devices and mobile data traffic, the wireless local area network (WLAN) faces persistent challenge on increasing the network throughput to meet the customer’s requirement. Multiple-Input and Multiple-Output (MIMO) is a promising technology to improve the network capacity and has been adopted to WLANs in current IEEE 802.11 standards. Interference management for MIMO-based WLANs has become a hot topic in recent years due to its huge potential in improving the network performance. This paper surveys the MIMO-related interference management mechanisms from both the single collision domain and multiple collision domain scenarios. It first provides some background information about the evolution of IEEE 802.11 standards, then introduces the MIMO-related physical layer and MAC layer mechanisms as preliminaries. After this, it investigates the current advances on MIMO-related interference management in both the single collision domain and multiple collision domain through the physical layer and MAC layer mechanism design. It also provides discussions on important findings and research challenges, and finally gives potential future research directions.
13 November 2021 in IEEE Transactions on Cloud Computing
Leveraging emerging mobile edge computing and 5G networks, researchers proposed to offload the 3D rendering of interactive applications (e.g. virtual reality and cloud gaming onto GPU-based edge servers to reduce the user experienced latency. A task offloading problem arises, that is where to offload rendering tasks such that each user will experience tolerable delay and meanwhile the cost of used servers is minimized. The multi-dimensional resource sharing feature of rendering tasks makes the problem challenging. We formulate the task offloading problem into a boolean linear programming. We propose a sharing-aware offloading algorithm which decomposes the problem into two subproblems (user assignment and server packing and solves them alternately and iteratively. We compare our algorithm with the one without resource sharing in consideration, and the simulations demonstrate that our method can effectively reduce cost as well as satisfy delay requirement.
17 March 2021 in IEEE Transactions on Mobile Computing
The coexistence of heterogeneous devices in wireless networks brings a new topic on cross-technology communication (CTC) to improve the coexistence efficiency and boost collaboration among these devices. Current advances on CTC mainly fall into two categories, physical-layer CTC and packet-level energy modulation (PLEM). The physical-layer CTC achieves a high CTC data rate, but with channel incompatible to commercial devices, making it hard to be deployed in current wireless networks. PLEM is channel and physical layer compatible, but with two main drawbacks of the low CTC data rate and MAC incompatibility, which will induce severe interference to the other devices’ normal data transmissions. In this paper, we propose symbol-level energy modulation (SLEM), the first CTC method that is fully compatible with current devices in both channel and the physical/MAC layer processes, having the ability to be deployed in commercial wireless networks smoothly. SLEM inserts extra bits to WiFi data bits to generate the transmitting bits, so as to adjust the energy levels of WiFi symbols to deliver CTC information. We make theoretical analysis to figure out the performance of both CTC and WiFi transmissions. We also conduct experiments to demonstrate the feasibility of SLEM and its performance under different network situations.
11 October 2022 in IEEE Transactions on Vehicular Technology
With the prosperity of Internet of Things, a large number of heterogeneous wireless devices share the same unlicensed spectrum, leading to severe cross-technology interference (CTI). Especially, the transmission power asymmetry of heterogeneous devices will further deteriorate this problem, as the high-power devices (like WiFi) always corrupt the ongoing transmissions of low-power devices (like ZigBee), because the energy of the ZigBee signal perceived by WiFi is too weak to achieve the CCA (Clear Channel Assessment) threshold and the channel is considered to be idle. This paper proposes an enhanced CCA (E-CCA) mechanism to mitigate CTI in WiFi and ZigBee coexistence networks. E-CCA contains ZShark which can identify signals within a tolerable time duration. It also contains a MAC layer design, with which a WiFi device can still determine the channel to be busy when the detected energy is below the CCA threshold while a ZigBee signal is identified, thus to avoid CTI to ZigBee transmissions. We set up a testbed based on USRP B200 and TelosB to collect data and evaluate the performance of ZShark. We further evaluate the performance of E-CCA through both theoretical analysis and simulations on NS-3. The results show significant performance improvement of ZigBee.
With the rapid growth of Internet of Things, the number of heterogeneous wireless devices working in the same frequency band increases dramatically, leading to severe cross-technology interference. To enable coexistence, researchers have proposed a large number of mechanisms to manage interference. However, existing mechanisms have severe modifications in either the physical or MAC (medium access control) layers, making them very different from the standard. In this paper, we design and implement SledZig to boost cross-technology coexistence for low-power devices through both enabling more transmission opportunities and avoiding interference. SledZig is fully compatible with the standard in both physical and MAC layers. It decreases the WiFi signal power on the channel of low-power devices while keeps the WiFi transmission power unchanged, through making constellation points on the overlapped subcarriers have the lowest power, which can be achieved by just encoding the WiFi payload. We implement SledZig on hardware testbed and evaluate its performance under different settings. Experiment results show that SledZig can effectively increase ZigBee transmissions and improve its performance over a WiFi channel under various WiFi data traffic, with as low as 6.94 $\%$ WiFi throughput loss.