In recent years, with the development of hydrogen energy economy, there is an increasing demand for hydrogen in the market, and hydrogen production through biomass will provide an important way to supply clean, environmentally friendly and highly efficient hydrogen. In this study, cow dung was selected as the biomass source, and the efficiency of the biomass to hydrogen reaction was explored by coupling high temperature pyrolysis and water vapor gasification. The experimental conditions of gasification temperature, water mass fraction, heating rate and feed temperature were systematically studied and optimized to determine the optimal conditions for in situ hydrogen production by gasification of cow dung. The relationship of each factor to the yield of hydrogen production by gasification of cow dung semi-coke was investigated in order to elucidate the mechanism of the hydrogen production. The experiment determined the optimal operating parameters of in situ gasification: gasification temperature 1173 K, water mass fraction 80%, heating rate 10 K/min and feed temperature 673 K. The semi-coke treatment separated high temperature pyrolysis and water vapor gasification, and reduced the influence on gasification of volatile substances such as tar extracted from pyrolysis. The increase of semi-coke preparation temperature increases the content of coke, reduces the volatile matter and improves the yield of hydrogen; the small size of semi-coke particles and large specific surface area are beneficial to the gasification reaction.

In this work, the computational particle fluid dynamics (CPFD) method is used to simulate the high-pressure visual fluidized bed experimental equipment independently designed and developed by the experimentation of the fluidized reduction process of iron ore powder. A numerical model for reducing iron ore fines in a three-dimensional fluidized bed is established, and the model is verified by combining numerical simulation and experimental testing. Moreover, the influences of different reducing factors on the reduction effect in the process of the fluidized reduction of iron ore fines are simulated in detail. Via the CPFD simulation of the fluidized reduction of iron ore fines, the optimal reduction pressure is found to be 0.2 MPa, and the optimal reducing gas is found to be H₂. Moreover, the optimal gas velocity is 0.6 m/s, and the optimal reduction temperature is 923 K. This conclusion is consistent with the experimental measurements, so the simulation results can be used to verify the reliability of the optimal operating conditions.