Laser shock peening (LSP) is an innovative surface treatment process with the potential to change surface microstructure and improve mechanical properties of additively manufactured (AM) parts. In this paper, the influences of LSP on the microstructure and properties of Ti–6Al–4V (Ti64) titanium alloy fabricated via selective laser melting (SLM), as an attractive AM method, were investigated. The microstructural evolution, residual stress distribution and mechanical properties of SLM-built Ti64 samples were characterized before and after LSP. Results show that the SLM sample was composed of single hcp α’ phase, which deviates from equilibrium microstructure at room temperature: α + β phases. The LSP significantly refines the grains of α’ phase and produces compressive residual stress (CRS) of maximum magnitude up to −180 MPa with a depth of 250 μm. Grain refinement of α’ phase is attributed to the complex interaction of dislocations and the intersection of deformation twinning subjected to LSP treatment. The main mechanism of strength and micro-hardness enhancement via LSP is ascribed to the effects of CRS and α’ phase grain refinement.

Nickel-based alloy metal matrix composite (NAMMC) is a new type of composite material which is expected to replace traditional Nickel-base superalloy used in the manufacture of important hot-end components in aerospace, naval ships and industrial gas turbine engines due to its excellent high temperature strength, superior thermal fatigue resistance, high oxidation resistance and thermal corrosion resistance. However, these outstanding properties make it hard to process these materials with conventional manufacturing methods such as forging and machining owing to posing problems of high cost and energy consumptions. Laser additive manufacturing (AM) with a high degree of machining freedom and a high-energy-density laser beam as heat source has been used for processing NAMMC hot-end components with superior performance and complicated structure. Nevertheless, some manufacturing defects of poor bonding, high residual stress, cracking, pore etc. still exist in laser AM NAMMC parts. Therefore, this paper reviews research progress of laser AM NAMMC at present. The control method of manufacturing defect and the effect of reinforcements on the microstructure and mechanical properties of NAMMC are summarized. In addition, the challenges and prospects of laser AM NAMMC in the future are also discussed.